Avtomatska tračna žaga - vodoravna

BERG & SCHMID GBS 255 VA-I CNC

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys Todpefg E Hysfx Abgjf for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: novo,

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Mitre saw with a 600 mm saw blade diameter (optional 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinder height and tilt angle steplessly adjustable) - Two-hand safety control Options available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Sawing machine version - Preloading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with a tailored quotation according to your requirements. The machine can be inspected and tested in 56812. Tjdpfxed Rhzws Abgsf

Stanje: rabljeno, Leto izdelave: 2003, Krmiljenje 840D-PCU 50 V1 Kosov na zalogi: 3 Hladilna tekočina: da Transporter za ostružke: da, kW Nazivni tok generatorja: 110 A Tsdpfx Abjqn A Rregof Priključna moč: 56 kW

Stanje: novo, Leto izdelave: 2025, Delovno območje: 6100 mm × 1524 mm / 4000 mm × 1524 mm / 3048 mm × 1524 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja: ±0,05 mm Ponovna natančnost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 91 m/min Maksimalno pospeševanje: 1G Tjdpfx Asg Eglpsbgef 1. Raztegnjen aluminijast nosilec Letalsko-kakovosten material z izboljšano togostjo bistveno zmanjšuje deformacije nosilca pri visokih hitrostih ter povečuje občutljivost in učinkovitost obdelave pri visokih hitrostih. 2. Posteljna konstrukcija z ugreznjenimi spojkami (Tenon-and-mortise) Uporablja tradicionalno kitajsko spojno tehniko "tenon and mortise" za večjo nosilnost. Priključne točke za varjenje in nosilna konstrukcija zagotavljajo dolgoletno stabilnost delovanja. Varjena konstrukcija prispeva k boljši absorpciji vibracij, zmanjša odklone ob tresljajih ter omogoča natančnejše rezanje. 3. Dvojni avtomatski centrirni električni vpenjalniki Dvojna električna vpenjalnika z avtomatsko centrirno funkcijo sta enostavna za uporabo in zahtevata minimalno vzdrževanje. Nov motor omogoča natančen nadzor. Modularne komponente vpenjalnika so samostojno razvite ter jih je mogoče hitro zamenjati. 4. Avtomatska funkcija ostrenja laserske glave Z nastavitvijo perforacijske in rezalne žariščne razdalje posebej je rezanje natančnejše. Primerna za različne žariščne razdalje – položaj žarišča se samodejno prilagodi glede na debelino posameznih pločevin. 5. Funkcija alarma pri nizkem tlaku plina Sproten nadzor tlaka plina in javljanje nepravilnosti zagotavljata kakovost in natančnost reza ter pravočasno opozorita upravljavca na potrebo po zamenjavi plina.

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling Tedpfx Abofww Sqogof You are welcome to inspect the desired system at any time in our production/demo hall. Do not hesitate to contact us for more information. Plantec Maschinen GmbH

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable Todpfx Aefgyicebgjf • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Leto izdelave: 2025, SE UKVARJATE Z RAZREZOM DEBELIH HLODOV IN IŠČETE MOČNO TRAČNO ŽAGO, KI BO BREZ TEŽAV REZALA VAŠO DEBELO HLODOVINO? POTEM IMAMO REŠITEV ZA VAS HORIZONTALNO TRAČNO ŽAGO WRC 1550! ✔️ROBUSTNA KONSTRUKCIJA, KI OMOGOČA STABILNOST ŽAGE ✔️GLAVNI MOTOR 55-110kW ✔️IDEALNO RAZMERJE MED PREMEROM GLAVNIH KOLES, ŠIRINO GLAVNIH KOLES, DOLŽINO, ŠIRINO IN DEBELINO TRAČNEGA LISTA, KI OMOGOČA NATANČEN, HITER REZ ✔️DVOSTRANSKO ULEŽAJEN KOLESA, KI OMOGOČAJO STABILNOST STROJA TUDI NA DOLGI ROK! ✔️KOMPLETNA HIDRAVLIČNA OPREMA NA GLAVI ŽAGE ✔️KOMPLETNA HIDRAVLIČNA OPREMA NA PROGI ŽAGE (VKLJUČNO S HIDRAVLIČNIMI DVOJNIMI OBRAČALCI, KI SO ZASNOVANI POSEBEJ ZA OBRAČANJE DEBELIH TEŽKIH HLODOV) Tsdpfx Absv R Umujgef 👉 Za več informacij in povpraševanje nas kontaktirajte!

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance Tjdjvvkfdepfx Abgof - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: novo, Horizontalna upogibna stiskalnica Fastech FP 30 Tedjfg Eu Uspfx Abgjf Opis • Sila: 30 t • Hod: 285 mm • Maks. višina orodja: 250 mm • Plosko železo po visoki strani: 200 x 18 mm • Delovna hitrost: 10,0 mm/s • Hitrost povratka: 10,0 mm/s • Delovna višina: 930 mm • Miza: 660 x 1250 mm • Skupna moč: 3,0 kW • Motor: 400 V 50Hz • Teža: 850 kg • Dimenzije D-Š-V: 1250 x 650 x 1250 mm • Količina olja: 40,0 l Oprema: • Hidravlična horizontalna upogibna stiskalnica • Masivna delovna površina iz stabiliziranega jekla • Stroj iz kaljenega in brušenega kovanega jekla • Digitalni prikaz za nastavitev hoda • 1x komplet orodij • Dvojno nožno stikalo