Tračne žage - vodoravno

BERG & SCHMID GBS 250 Super HA -I Easy

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m Cgsdpfx Agsfgyh Ujqow SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice

Stanje: novo, Model designation Cgedogvquwjpfx Agqsw Shark 332-1 CCS

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm Codpjfu Ivzsfx Agqsgw • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Leto izdelave: 1990, Univerzalni orodjarski rezkalni stroj Proizvajalec: MACMON Cedpfx Agsx Ada Roqsgw Model: M 100 E Leto izdelave: 1990 – delavniško preverjeno Št. stroja: 1479 Geometrijski prevzem s kontrolnim protokolom Dodatna oprema: - 3-osni digitalni prikazovalnik K+C Arbah-M, nov - Fiksna miza 600 x 210 mm (T-utor: 12 mm) - Vertikalna rezkalna glava SK 40 z vlečnim navojem S 20 x 2 - Naprava za hlajenje - Navodila za uporabo Rabljeno, kot je vidno, brez garancije Stroj je tehnično skladan z letom izdelave.

Stanje: zelo dobro (rabljeno), various steadies Cgodpfxod E Tb Ee Agqjw

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Csdpfx Aju Afttegqegw Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Idealarc® DC-1000 Submerged Arc Welder Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Stanje: novo, Leto izdelave: 2026, Table length: 3000 mm Table width: 1500 mm Torch heads: 1 Control: CNC Workpiece weight: 900 kg Travel speed: 91 m/min Space required, approx.: 5562 x 2270 x 2388 mm Laser cutting system with manual shuttle table Configuration: 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with mortise and tenon structure 5. Bodor servo motor and drive 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout for leftover material 9. 21.5-inch touchscreen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision feature 12. Intelligent vibration protection 13. Anti-burning mineral cast frame 14. Bodor Mango ® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Fume extraction 20. Set of wear parts CUTTING CAPACITY: Mild steel: 20 mm Stainless steel: 18 mm Aluminum: 14 mm Total rated machine power: 36.4 kW Cgodpfx Agjwh Ulqoqew Total rated machine current: 69.2 A Average power consumption: 23.1 kWh OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm Cjdpormkfnefx Agqjgw GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Leto izdelave: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Cgsdpfx Agehl H Ubsqew Fully automatic hot water parts washing machine with basket drive via gear motor, system housing made of stainless steel 1.4301, pipelines and rotating basket made of galvanized steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control as dry-run protection. - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 120 liters - Heating: electrically adjustable (RT - 60°C) - Machine dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm - Suction filter for pump protection Delivery: ex works, FCA

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Varilni stroj: FUSION 4H Enota za razklad plošče Prvi rezkalni modul Q-MATIC 1 Serijska povezava med varilnim strojem in čistilcem Rotacijska miza Čistilnik (drugi model) TRIMMER 4A Cgjdpfx Agexzzxbeqew Izvlečna miza Drugi rezkalni modul (INTEGRA Q2) Q-MATIC 2 Prenosni računalnik nadzornika linije