Tračne žage - vodoravno

BERG & SCHMID K-tech DG 50/33 HA-I

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Kdsdev Hg Euopfx Ai Nop Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital Kdodet Hw Shopfx Ai Njp position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm Kjdpfehuthyjx Ai Njdp maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm - Electrically tiltable Kjdpogg Rb Tsfx Ai Nedp - Foot pedal - Documentation - 230V

Stanje: novo, Leto izdelave: 2025, nosilnost: 5.000 kg, Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Kdodpfx Ajl Dq U Usi Njp Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Rotational speed from 0.01 to approx. 0.9 rpm CE certification

Stanje: kot nova (razstavni stroj), MIG/MAG varilni stroj s inverter tehnologijo Trofazno napajanje, varilni stroj - Vključno z Master Software TERRA PME Tehnični podatki Napajanje Napetost (50/60 Hz): 3x400 ±15% Maksimalna vhodna moč: 22,9 kVA Maksimalni vhodni tok: 31,1 A Faktor moči PF: 0,73 Učinkovitost: 89% Počasna varovalka: 25 A Napetost v prostem teku: 61Vdc IP zaščita: IP23S Izolacijski razred: H Napajalni kabel: 4x3mm2 - 5 m Varjenje Nastavitveni razpon: 3-400A Delovni cikel MIG/MAG - 40 °C: 40% - 400A 100% - 330A Delovni cikel MIG/MAG - 25 °C: 100% - 400A Premer žice: 1,0-1,2 mm (opcijsko 0,6-1,6) Premer polnjene žice: 0,9 - 2,4 mm Premer aluminijaste žice: 0,8 - 1,6 mm Kdodpfx Asw Rm Saoi Njp Hitrost podajanja žice: 0,5 - 22,0 m/min Premer koluta žice: Ø 200/300 mm Daljinski upravljalnik: da

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: DECKEL MAHO CNC Universal Milling Machine Type: DMU 50 M Year of manufacture: 1998 _____ Working area: - Travel X-axis: 500 mm - Vertical travel Z-axis: 400 mm - Cross travel Y-axis: 400 mm - C-axis – table rotation, manual: 360° - B-axis – table tilting, manual: ° Table size: Ø 700 x 500 mm Table tilting range: ° Table rotatability: 360° Max. workpiece weight: 200 kg Distance between table and spindle approx.: 550 mm Reach between machine and spindle min/max: 2 – 6 mm Tool holder: SK 40 Spindle speeds steplessly programmable: 20 – 4,500 rpm Feed rates / rapid traverse max.: 5,000 mm/min AC main drive 0%/40% duty cycle approx.: 9 / 13 kW Total power approx.: 15 kW - 400 V - 50 Hz Kdsdpfjv Td Eljx Ai Nep Weight approx.: 3,000 kg Accessories / Special equipment • 3-axis path control HEIDENHAIN TNC 124 with display and direct input of all data, including electronic handwheels for all 3 axes. • All 3 axes in the milling head, allowing “irregular” workpieces to be machined on the stationary table. • Rotary table, 360° manually rotatable, +/-° manually tiltable (each with clamping). Digital display of tilt angles integrated into the control. • Simple coolant system, attached control cabinet (SIEMENS equipment). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good! Ideal for training or single-part production! Click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Always a large selection of milling machines in stock – please let us know your requirements!

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Maximum press output: up to 2000 m² / 7.5 hours Ksdpfx Aorqzgkoi Nedp Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Kjdpok Nn Iljfx Ai Nodp

Leto izdelave: 2024, stanje: novo, Motorized Guillotine Shear Technical Data Cutting Capacity: 2.5 mm Kdsdshk Nf Rspfx Ai Nep Cutting Length: 2550 mm Cutting Angle: 1°40‘ Strokes per minute: 35 1/sec Motor Power: 3 kW Backgauge Range: 550 mm Table Width: 400 mm Table Height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1540 kg