Tračna žaga z dvojnim zajeralnim zarezom

HUVEMA / Beka-Mak HU 230 DGH-4 / BMSY 230 DGH

Stanje: novo, The bSander 75.200 & 150.200 are machine grinders designed for grinding pipe ends and profile ends, as well as for edge grinding and surface grinding on the top side of the unit. bSander 150.200: Belt dimensions: 150 x 2000 mm Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Dedjd Dp Aaopfx Aflecb Belt dimensions: 2000 x 75 mm Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50 Hz Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Stanje: novo, konfiguracija osi: 3 osi, prva registracija: 03/2023, dolžina tovornega prostora: 16.160 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.770 mm, skupna dolžina: 16.160 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, medosna razdalja: 1.410 mm, barva: rdeča, Leto izdelave: 2022, Oprema: dvižna zadnja plošča, Colour: Red Payload Capacity: 55,200 kg Loading Platform Height: 89 cm Extendable Manufacturer: Goldhofer Type: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year of Manufacture: 2022 – New/Unused Weights: • King-pin load: 18,500 kg • Axle load: 12,000 kg • Total axle load: 48,000 kg • Gross Vehicle Weight (GVW): 66,500 kg • Unladen weight: 11,300 kg • Payload capacity: 55,200 kg Dimensions: • Length: 13,020 mm • Extension: 3,140 mm • Max. extended length: 16,160 mm • Loading width: 2,550 mm / 3,000 mm • Loading height: 855 mm / 895 mm • +100 mm / -100 mm • Height: 3,755 mm • King-pin height: 1,300 mm Axles: • Axle brand: BPW Eco Plus • Air suspension • 1st axle liftable • 1st & 2nd axles fixed Dcsdpeuu Hgdofx Afljb • 3rd & 4th axles friction-steered • High/Low valve • ABS • Tyres: 245/70 R17.5 twin-mounted • Load index 143/141J (146/146F) Additional Features: • Remote-controlled loading ramps • Hydraulically operated loading ramps • Mechanical rear supports • Side extensions • Underrun protection • Wheel wells • Wheel well covers • 2.0'' king pin • Lashing rings • Stake pockets • Central lubrication • Marker boards for oversize transport • BPW landing gear • Toolboxes on gooseneck = Additional Information = Axle Configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tyres; lift axle; max. axle load: 12,000 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Front axle 2: Twin tyres; max. axle load: 12,000 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 1: Twin tyres; max. axle load: 12,000 kg; steerable; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; max. axle load: 12,000 kg; steerable; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functionality Tailgate: Goldhofer Extendable body: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damage: none Financial information Price: On request Further information Please contact Stefan Schaapveld for more details.

Stanje: novo, Machine in stock and immediately available Double mitre metal band saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Dedped R Sipefx Aflscb Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power rating S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made from stainless steel, steel, etc., for commercial use - Rugged, generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic downfeed cylinder - Quick-action vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimum cutting results - CE/IEC compliant, with German documentation and German after-sales service Scope of delivery: - Saw blade - Material stop - Manometer (blade tension) - Carbide blade guides - Vice with quick release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic end cut-off - Base frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 6.530 h, Valtra S 374 System Twin Trac, sistem vožnje v obe smeri, 6530 delovnih ur Djdjxnrt Nspfx Aflocb

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Dedpsfibd Tofx Afljcb Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: dober (rabljeno), Ponujamo rabljeni dvojni čeljustni drobilnik znamke Krupp. Dobro ohranjen, popolnoma delujoč. 500 x 300 mm, 15 kW, nova orodja. Motor je trenutno v prenovi. Dcjdpfxowy U Ice Aflob

Stanje: dober (rabljeno), Leto izdelave: 2002, Cutting diameter: 320 mm Saw blade length: 4160 mm Cutting width: 610 mm Maximum cut-off length: 500 mm Vise (clamping device): max. 620 mm Infinitely variable saw blade speed: 15–120 m/min Working height: 760 mm Saw blade dimensions: 4160 x 34 x 1.1 mm Control: Siemens Siematic OP3 Total power requirement: 2.6 kW Machine weight: approx. 1.96 t Space required: approx. 2.55 x 2.45 x 1.5 m Well-maintained automatic mitre band saw with Siemens Siematic OP3 control system for part quantity and cut-off length, hydraulic frame vice, infinitely variable saw blade speed. The saw can be operated either in fully automatic cycle or in manual single-cut mode. Previously used for small batch production with narrow parts—ONLY approx. 3 hours per week! Estimated operating hours: 3400. WIDE cutting capacity at 90° flat of 610 mm! Simple mitre adjustment Cutting capacity at 0° / 90° - round: 320 mm - flat: 610 x 320 mm Cutting capacity at 75° - round: 320 mm - flat: 350 x 200 mm Cutting capacity at 60° - round: 300 mm - flat: 300 x 200 mm Cutting capacity at 45° - round: 260 mm - flat: 250 x 180 mm Cutting capacity at 30° - round: 160 mm Dsdpfx Aev Htimeflecb - flat: 150 x 150 mm Please note: Original price approx. €28,000—German-made machines are considerably more expensive! This is a used machine, therefore we sell it under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1,600 m² WAREHOUSE.

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Djdpfx Aerah S Hjflocb Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, High-quality bench drilling machine with premium features. FLOTT TB 18 Plus (218303) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically angled front - LED workspace lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed adjustment via central rotary knob - Emergency stop pushbutton - Thermal overload protection - Spindle stop - Safety drill guard with electric interlock - Power cable with safety plug (Schuko) - 3-year warranty for single-shift operation Technical specifications: Continuous/standard drilling capacity (mm): 18/20 (in E335/ST60) Thread cutting capacity (depending on pitch): M12 Spindle: MT II Drilling depth (mm): 100 Throat (mm): 240 Column diameter (mm): 82 Usable work surface (W x L) (mm): 340 x 280 Speed display: Digital Drill depth display: Digital Drilling depth stop: Rapidly adjustable stop ring Feed (mm/rev): Manual Table height adjustment: Rack and pinion Motor three-phase – frequency-controlled, mains connection 230 V (kW): 0.75 Stepless spindle speeds (rpm): 30 – 3000 T-slot size (arm), spacing (mm), width (mm): 2 slots, 125 mm, 13/26 mm Spindle/working surface distance (mm): 155 – 415 (table), 155 – 550 (base) Machine dimensions without packaging (mm): 355 x 705 x 1065 Machine dimensions with packaging (mm): 570 x 940 x 1612 Dcjdpfx Aji Hp Ersflob Weight (kg): 170 Note: Please contact us for information on all other models.

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Dcedpfxoilg Hdj Aflob Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual