Tračna žaga

FLOTT HBS 250 HA (NEU ab Werk)

Stanje: novo, Leto izdelave: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirements: approx. 710 x 920 x 1360 mm Itedpeurni Uofx Af Tsb Equipment: - 5 powered bottom rollers - 4 adjustable top rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles Isdpfxod Iin Ts Af Totb • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Iodpfx Asm Rlb Nef Tetb Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: rabljeno, Mounting: MK 4 Iodob N Ezrspfx Af Tetb

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm Itsdpfx Afeggbuho Tob SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables continuously adjustable mitre cuts from -45° to +30° (swivel range: 45° to the left and 60° to the right). Technical specifications: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min Itedpomftv Rofx Af Tsb ● Saw blade: 2710 x 27 x 0.9 mm Standard equipment: ● Powerful belt drive ● Infinitely variable feed adjustment from the operator panel ● Manual clamping of the workpiece, movable vice with dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in various sizes and configurations!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, številka stroja/vozila: PM_1000, Used polishing machine for manual operation. Drive power: 5.5 kW Polishing wheel diameter: 1000 mm Iodpfxjfiuguj Af Tjtb

Leto izdelave: 1996, Stanje: dober (rabljeno), številka stroja/vozila: xxxx, High-Performance Bench Thread Tapping Machines on T-Slot Table Itodpfef Tcy Djx Af Teb Technical Data: - Thread tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (pivot radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Stanje: novo, Fastech Horizontal Bandsaw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity (mm): 360 Flat cutting capacity (mm): 510 x 360 Square cutting capacity (mm): 360 +30° round cutting capacity (mm): 360 Iodeg Ekttepfx Af Totb +30° flat cutting capacity (mm): 440 x 360 +30° square cutting capacity (mm): 360 +45° round cutting capacity (mm): 360 +45° flat cutting capacity (mm): 390 x 360 +45° square cutting capacity (mm): 360 +60° round cutting capacity (mm): 200 +60° flat cutting capacity (mm): 200 x 360 +60° square cutting capacity (mm): 200 -30° round cutting capacity (mm): 360 -30° flat cutting capacity (mm): 440 x 360 -30° square cutting capacity (mm): 360 -45° round cutting capacity (mm): 360 -45° flat cutting capacity (mm): 390 x 360 -45° square cutting capacity (mm): 360 -60° round cutting capacity (mm): 260 -60° flat cutting capacity (mm): 260 x 360 -60° square cutting capacity (mm): 260 Main drive motor output (kW): 3 Hydraulic pump power (kW): 0.37 Coolant pump motor power (kW): 0.12 Infinitely variable band speed: 20-100 m/min Saw band dimensions (mm): 4800x34x1.1 Table height (mm): 860 Weight (kg): 1,450 Length / Depth / Height (mm): 2,650 / 1,210 / 1,870 Double-mitre bandsaw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital mitre angle display

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools Itsdpfx Afeuxft Eo Teb - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.