Orodje soba glodalica - Universal

KAMI FKM 935 A-1

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function Hfjdpfx Aofd Abajf Tsb - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Hfedpfjpy Eldox Af Tob Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: novo, Leto izdelave: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes stands out due to: advanced engineering highest precision durability ergonomics proven in daily practice minimal space requirements and a wide range of accessories. Proven for decades in single-part and small-batch production, across trade and industry, for training and further education, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed shaft cover Main spindle brake Toolroom accuracy according to DIN 8605 Pole-changeable brake motor Headstock gearbox 16 fixed spindle speed steps Digital position readout (optional) Hfodpfx Aewhzcpsf Teb LED machine light TECHNICAL DATA: WORKING AREA Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 TEST ACCURACY DIN 8605 * Whitworth threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only possible using additional change gears. The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment and configuration, please contact us.

Stanje: novo, Leto izdelave: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Hodjurni Uepfx Af Tjfb Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirements: approx. 710 x 920 x 1360 mm Equipment: - 5 powered bottom rollers - 4 adjustable top rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Hfodpovambcsfx Af Tob Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: rabljeno, X-os: 30,0 in / 762 mm Y-os: 16,0 in / 406 mm Hjdpfxjiypzde Af Tofb Z-os: 16,0 in / 406 mm Pripravljen za pregled Pripravljen za dostavo

Stanje: novo, Optimum OPTImill MZ 2S Tool Milling Machine Featuring a digital 3-axis position display DP 700 from NEWALL. The feed axes are controlled by an inverter drive via the control panel. Versatile range of applications Excellent damping properties and rigidity of the machine bed All guides are hardened and precision ground, adjustable via gib strips Automatic feed on X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screws on all axes Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty, large-scale cross table with high-precision machined surface and 5 T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product) approx. 1239mm Width/Depth (product) approx. 1168mm Height (product) approx. 1900mm Net weight approx. 1400kg Drill-Milling Head Milling head swiveling range ±90° Drilling-Milling Performance Max. cutter head size 100mm Drilling capacity in steel (S235JR) 30mm Continuous drilling capacity in steel (S235JR) 26mm Max. end mill size 25mm Electrical Data Drive motor power 2.2kW Connection voltage 400V Mains frequency 50Hz Horizontal Milling Table Horizontal table length 750mm Hfedpofnh Sgefx Af Tjb Horizontal table width 320mm Distance vertical spindle to horizontal table min. 75mm Distance vertical spindle to horizontal table max. 410mm Horizontal table T-slot size 14mm Horizontal table T-slot number 5 Horizontal table T-slot spacing 63mm Distance horizontal spindle to horizontal table min. 70mm Distance horizontal spindle to horizontal table max. 400mm Maximum horizontal table load 285kg Vertical Milling Table Vertical table length 830mm Vertical table width 250mm Vertical table T-slot size 14mm Vertical table T-slot number 2 Vertical table T-slot spacing 63mm Coolant System Coolant pump drive power 95W Travel Paths Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Automatic X-axis travel approx. 310mm Automatic Y-axis travel approx. 160mm Automatic Z-axis travel 295mm Vertical Spindle Vertical spindle overhang 100mm Vertical spindle taper ISO 40 DIN 2080 Vertical spindle speed range 50 – 1890 rpm Vertical spindle number of speed ranges 12 steps Vertical spindle drawbar M16 Vertical spindle quill travel 120mm Vertical spindle max. load 1100Nm Feed Rate Feed rate X-axis 10 – 600mm/min Feed rate Y-axis 10 – 600mm/min Feed rate Z-axis 10 – 600mm/min Electrical Connection Total connected load 4kW Motors Rapid traverse X-axis drive motor power 0.375kW Rapid traverse Y-axis drive motor power 0.375kW Rapid traverse Z-axis drive motor power 0.375kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 MT1 and MT2 sleeves Horizontal milling spindle Ø 27 mm Operating tools

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp Hfjdpfx Aswudhujf Tjb All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay Hodpfxem Rlb Nj Af Tofb • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: rabljeno, Mounting: MK 4 Hedpfxob N Ezre Af Tsfb