Vodoravne tračne žage – polavtomatske – okroglo območje rezanja 0–300 mm nakup rabljenega (114)

Stanje: novo, Model designation: Shark 281 SXI evo Guedpfx Asgvkgljb Tok

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy Guedpefn Andofx Ab Tek • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0306283/0, - Zelo dobra tračna žaga za kovino. Visoka zmogljivost rezanja. - 5 novih tračnih žag - Valjčna proga cca 5 m (tudi popolnoma funkcionalna) Gusdpfx Ajxnarteb Tsk

Leto izdelave: 1992, Stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Gusdpfx Abogin Nds Tjk Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Premer reza 128 mm Gjdpfexbh Hfsx Ab Teuk Dolžina tračnega lista / mm Višina mize / mm

Stanje: novo, ROGI SAWING MACHINE TYPE CY300N INVERTER Saw blade size ----- 2750 x 27 x 0.9 mm Cutting speeds ----- 20~80 m/min Motor power ----- 1.5 kW (400V) Godpfjga T Eujx Ab Touk Weight ----- 350 kg Cutting capacity 0° 255 mm 200 mm 200 x 320 mm Cutting capacity 45° 195 mm 195 mm 195 x 200 mm Cutting capacity 60° 125 mm 125 mm 120 x 130 mm Cutting capacity -45° 200 mm 170 mm 170 x 200 mm INCLUDES Adjustable material vice Angle adjustment up to 60 degrees Automatic shut-off Low-noise electric motor Fully enclosed worm gear drive Hydraulic pressure control Swivelling base 45° Emergency stop Coolant pump Base cabinet Quick-release clamp 1 mounted saw blade

Stanje: novo, Model designation: Shark 282 SXI evo Gsdpfx Abegvkcts Teuk

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Guedpfx Absurc S Rj Tok

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: Godpfx Absilg Hdj Tsuk - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: novo, ROGI Bandsaw Type CY300 Inverter Gsdpfx Ajga Twuob Tsuk Saw blade dimensions: 2750 x 27 x 0.9 mm Variable cutting speeds: 20~80 m/min Motor power: 1.5 kW (400V) Weight: 390 kg Cutting capacity at 0 degrees: - Round: 255 mm - Square: 210 x 310 mm Cutting capacity at 60 degrees: - Round: 135 mm - Square: 135 x 135 mm Cutting capacity at -45 degrees: - Round: 220 mm - Square: 210 x 200 mm Cutting capacity at +45 degrees: - Round: 215 mm - Square: 210 x 200 mm INCLUDES: - Adjustable material clamp - Mitre scale up to 45 degrees - Automatic shut-off - Low-noise electric motor - Enclosed worm gear transmission - Hydraulic pressure regulation - Rotatable base, 45° - Emergency stop - Coolant pump - Base cabinet - Quick-release clamp - 1 saw blade mounted

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Gusdofgyh Eepfx Ab Tok Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Bandsaw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Guedega Tzujpfx Ab Tjk Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90° ----- 270 mm / 260 x 320 mm Cutting capacity 60° ----- 140 mm / 140 x 140 mm Cutting capacity 45° ----- 230 mm / 220 x 220 mm Cutting capacity -45° ---- 200 mm / 220 x 150 mm INCLUDES Bandsaw blade Workpiece stop Base cabinet Manometer for bandsaw blade tension Bandsaw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic end stop

Stanje: novo, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Blade speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirements: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut is completed, the machine stops automatically via a safety limit switch. The lowering speed is infinitely adjustable via a hydraulic system. Raising the saw arm after the cut can be set to any desired position; the saw arm will remain at the selected position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric vice - Machine base - Saw blade - 400V plug (16A) Godpfx Abjfgyh Ns Touk The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) Godjfgyh Uspfx Ab Touk • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller Guodpfx Aofgyicsb Tjk • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Guodpfjd Iip Nsx Ab Tjk SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950x27x0.9 mm Table height: mm (not specified) Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Space requirement: approx. m (not specified) Absolute special price!! 7,170 EUR (Current price as of 2024 is 9,425 EUR) Standard equipment: - Vice with quick adjustment and adjustable guide rails - Hydraulic blade tensioning device with tension pressure gauge Gedpfx Abefg E H Nj Teuk - Base frame with removable coolant tray - Chip removal brush - Precision stops set for cuts at: 0°, 45° and 60° to the left and 45° to the right - Rotary table for double miter cuts - Electric coolant system 48 V (Option to install a micro-spray device)

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Gjdpfx Aefgyh Sob Tjuk Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Godpfx Absfg E Hpo Tsuk Price on request.

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Gedpfsu Sbpvsx Ab Touk Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: novo, Cutting diameter: 185 mm Saw blade length: 2,085 x 20 x 0.90 mm Table height: 915 mm Blade speed: 35/70 m/min Cutting capacity at 90 degrees (round): 185 mm Cutting capacity at 90 degrees (square): 150 mm Gjdpfx Abehpktre Tjuk Cutting capacity at 90 degrees (flat): 220 x 150 mm Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 195 kg Space requirement: approx. 550 x 1,280 x 1,740 mm Metal bandsaw with stepless electronic speed control and automatic lowering. - Selector switch for hydraulically controlled or manual band arm lowering - Saw arm can be swiveled up to 60° to the right - Quick-release vice - Blade guidance with 8 ball bearings - Hydraulic saw blade tensioning with tension display and blade break protection - Including coolant device - Including machine base cabinet

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Guodpfx Aefg E H Isb Tok Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment Godpfxod Iip Rs Ab Tsuk - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min Guodpfxefgyh Rs Ab Tok - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 210 mm Območje reza pri 90 stopinjah: pravokotno 290 x 210 mm Dolžina žaginega traku 2.965 x 27 x 0,9 mm Višina mize 940 mm Hitrost traku 25 - 90 m/min Skupna potrebna moč 1,1/1,3 kW Teža stroja pribl. 0,35 t Prostorske zahteve pribl. 1,3 x 0,8 x 1,5 m RAZSTAVNI STROJ po posebni ceni!!! Dvostranska tračna žaga za kovino, polavtomatska z: - Hidravlično vpenjalo - Senzor višine materiala - Nadzor reza preko ampermetra - Regulator pritiska reza - Hitrost traku 25 - 90 m/min - Poševni rezi do 60° levo in 45° desno - Patentirana, kroglična vrtljiva miza za enostavno nastavitev kota Gujdexfwcdepfx Ab Tsk - Hitro nastavljivo vpenjalo, pomično - Vzvod za hitro vpenjanje - Samodejno hlajenje