Stroj za tračno žaganje Stuermer

Metallkraft BMBS 300 x 320 HA-DG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Cutting Capacity 0° round (pipe) 300 mm Cutting Capacity 0° round (solid material) 180 mm Cutting Capacity 0° rectangular horizontal (hollow section) 320 x 290 mm Cutting Capacity 0° bundle (pipe) 320 x 160 mm Cutting Capacity -45° round (pipe) 300 mm Cutting Capacity -45° round (solid material) 110 mm Cutting Capacity -45° rectangular horizontal (hollow section) 300 x 280 mm Redpfx Asxz Dqmefaew Cutting Capacity -60° round (pipe) 200 mm Cutting Capacity -60° round (solid material) 80 mm Cutting Capacity -60° rectangular horizontal (hollow section) 190 x 200 mm Cutting Capacity +45° round (pipe) 270 mm Cutting Capacity +45° round (solid material) 110 mm Cutting Capacity +45° rectangular horizontal (hollow section) 270 x 200 mm Table height for material infeed 800 mm Main motor 2.6 kW Cutting speed, infinitely variable 20 - 100 m/min Saw blade size 3660 x 27 x 0.9 mm Machine dimensions (L x W x H) approx. 1800 x 950 x 1400 mm Net weight 585 kg Accessories / Special Features: • Semi-automatic pivoting frame metal band saw • After starting the cutting cycle, the vice automatically clamps – after the process ends, it returns to the starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting e.g. stainless steel, tool steel, hollow sections, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing rotary table • Saw arm inclined by 25°, resulting in longer blade life • Swivelling saw arm from +60° to -45° • Chip removal brush for optimal cleaning and maintenance of the saw blade • With frequency inverter: allows for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min. • BRP – Saw blade monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control the upper and lower position of the saw arm • No need to set the upper end point • Length stop with scale, 3 m removal on the left side • Cut probe • Swivelling control panel • Micro spray unit • 2 x roller conveyors: 3 m unloading on the left and 6 m infeed on the right • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2020, max. dolžina obdelovanca 6360 mm rezkalno vreteno 1 kos glavni motor 13 kW krmiljenje Maestro SCM CNC-obdelovalni center ACCORD 40 FX za okna in vrata ----- IZBIRNO na voljo za doplačilo: obsežen komplet orodja za izdelavo oken in vrat, med drugim (izrezi za okenske profile na zahtevo!): lesena okna IV 68, 78, 92 lesena "stilna" okna les-aluminij okna vhodna vrata dvižno-drsna vrata škatlasta okna Stroj si je še mogoče ogledati v obratovanju! Tehnični povzetek (podrobnejši opis na zahtevo!): ----- - Delovno območje X-Y = 6360x1905 Z = 350 - Avtomatska miza z 8 nosilnimi tirnicami MATIC - L1825 Rjdpfx Afsy Hl Iyjasw - 5-osno vreteno MAXI - Prisma T, HSK 63 E, 13 kW - RTCP nastavitev – samokalibracijski sistem za delovno enoto Prisma - Čipanec na elektro-vretenu, nastavljiv - Priprava za kotni prenos "Prisma T-S" - BRC delovna enota: žagin list za čelno obdelavo, 1 priključek za rezkar, vertikalno 3 vertikalne neodvisne vrtalne glave, razmak 32 mm 3 vertikalne vrtalne glave (med seboj niso neodvisne), razmak 21,5 mm, za izvrtino za kljuko 4 horizontalne vrtalne glave (po 2 na stran, med seboj niso neodvisne), razmak 21,5 mm 2 horizontalni rezkalni glavi (po 1 na stran) - TRC 48 – zadnji skladiščni magazin za orodja 48 mest za orodja (brez orodnih držal) razmak med mesti 104 mm maks. premer orodja 350 mm maks. dolžina orodja 320 mm maks. teža posameznega orodja 10 kg (15 kg z vretenom HSK 63 E) maks. skupna teža v magazinu 250 kg - MACH 5 – hitromenjalnik: omogoča menjavo orodja na elektro-vretenu v samo nekaj sekundah. - Nihajno delovanje (pendel način) - Samodejno mazanje osi - upravljalska konzola eye-M z integriranim PC-jem - dodatna fiksna upravljalska konzola - TECPAD – daljinsko upravljanje funkcij stroja - Priprava za vpenjalke H145 na delovno mizo z 8 tirnicami - Sprednja linija prislonov H110 za delovno mizo 8 tirnic - Zadnja linija prislonov H110 za delovno mizo 8 tirnic - Sesalci H110 145x145 mm - Sesalci H110 145x55 mm, vrtljivi - Sesalci H110 180x65 mm, vrtljivi - Prva stranska linija prislonov H145 za delovno mizo z 8 tirnicami - Druga stranska linija prislonov H145 za delovno mizo z 8 tirnicami - Vpenjalke H145 z okroglo osnovo - Vpenjalke H145 s kvadratno osnovo - 6 dvigovalnih enot z dvojnim hodom H145 - Laser in referenčni prislon H145 za lok (levo) - Varnostni sistem PRO-SPEED - Maestro cnc – vmesnik za upravljanje in programiranje stroja - Maestro pro view – simulacijska programska oprema Prodaja orodij v stanju, obsegu in z dodatki, kot so na zalogi v našem skladišču. Opomba glede izrezov za okna, risb orodij in seznamov orodnih sistemov: Podjetje Engelfried ne prevzema nobenega jamstva, da se dejansko prisotna orodja ujemajo z navedenimi ali narisanimi sistemi. (tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure Rjdpfowvqkljx Afaew • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Redpfxswu Ez Ne Afajw

Stanje: novo, Leto izdelave: 2024, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device Rjdpjt I R Edjfx Afasw a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Three-lane elevator - 24-head weigher with 1L hopper - 32-head weigher with 1L hopper - KEN Hygiene System EWD 50 (Weigher auxiliary equipment washing station) Rsdpopxm Ugofx Afaow - Platform with stairs - Distribution tools – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set was only used for equipment testing, with approx. 100 operating hours. The line was dismantled by authorized Cabinplant and Multivac service teams.

Stanje: novo, Model designation Rodpfogvquwjx Afaew Shark 332-1 CCS

Stanje: novo, Leto izdelave: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE -- Combustion chamber fully lined with fireclay Suitable for rooms: 4,800 m³ (according to DIN) Rsdpfxedlhdbj Afajw Fuel: Firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 40 - 50 kg/h Fan air output, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Povsem avtomatski stoječi, Območje reza 5.300 x 2.200 mm (širina reza x višina reza), Premer žaginega lista: 300 mm, Krmiljenje za vertikalne in horizontalne reze, z ALU preklopnimi prisloni in ALU vmesno podporo, z napravo za predrezovanje SUPER-CUT Motor 3 kW - 400 V Rodpjx Rr D Asfx Afaew Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Redpfx Afju R Szaeajw Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -