Sem London nakup rabljenega (3.963)

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 167, Format (cm): 58 Isdpfx Afohu R U Dj Tstb Equipment / additional information: 1x spare blade Very good condition // tested, inspected, and refurbished

Stanje: rabljeno, Servo motor, electric motor, DC motor, stepper motor, stepping motor - Manufacturer: SEM Andras, Brushless Servo Motor Type HR115A6-88S - Speed: 6000 rpm - Voltage: 530 V - Torque: 3.7 Nm - Shaft: Ø 19 x 40 mm - Brake: 24 VDC, 10 Nm - Quantity: 2 motors available - Price: per unit - Dimensions: 275/115/H145 mm Itedpfohu Hxcox Af Tjb - Weight: 7 kg/unit

Stanje: rabljeno, DC motor, servo motor, gear motor, electric motor, DC geared motor, DC shunt geared motor - Manufacturer: SEM, DC geared motor - Type: DPM30E4 - Voltage: 36 V - Speed: 70 rpm Itsdpfxjtrzphj Af Tjb - Technical data: see photo of the nameplate - Shaft: Ø 30 x 50 mm - Dimensions: 430/150/H130 mm - Weight: 14.3 kg

Stanje: dober (rabljeno), Servomotor, elektromotor, enosmerni motor, korakni motor, stepper motor, stepping motor - Hitrost vrtenja: 2500 min⁻¹ - Navor: 4,5 Nm - Izvedba: B14 Itsdjcv Siqjpfx Af Tob - Premer gredi: Ø 16 mm - Z Hohner kodirnikom 267AB - Količina: 1 motor na voljo - Cena: na kos - Dimenzije: 400/100/H145 mm - Teža: 9,3 kg

Stanje: rabljeno, Screw jack gearbox, linear actuator, linear gearbox, lifting gearbox, screw lift element, spindle drive, electric actuator, valve actuator, actuator, servo motor, screw jack gearbox, lifting drive - Screw jack gearbox: from double mitre saw elumatec DG 204 Itodpfx Aettnt Iof Tob - Gearbox manufacturer: Atlanta, type 539 05 040 i 4 - Motor manufacturer: SEM, type DPM30E4 36 V 0.18 kW - Dimensions: 450/320/H130 mm - Weight: 9.5 kg

Stanje: pripravljen za uporabo (rabljen), SEM MT30F4-52 Ferrite Brushed DC Servomotor SN: J13270, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itodpfjt S Al Djx Af Teb

Stanje: pripravljen za uporabo (rabljen), SEM MT30Z4-85 Ferrite Brushed DC Servomotor SN:F23128, rear cover is missing, see photo, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Itjdpst Ttkyofx Af Tjb

Stanje: pripravljen za uporabo (rabljen), SEM MT30U4-57 permanent magnet DC servomotor, SN: F03088, used, normal signs of wear, 100% functional, scope of delivery as per photos Iedpet S Ambofx Af Totb

Stanje: pripravljen za uporabo (rabljen), SEM MT30Z4-85 Ferrite Brushed DC Servomotor SN:L9813, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Itsdpfx Ast S Anxof Teb

Stanje: pripravljen za uporabo (rabljen), SEM MT30U4-57 Ferrite Brushed DC Servo Motor SN: J2514, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itjdet Ttkmspfx Af Tob

Stanje: pripravljen za uporabo (rabljen), SEM MT30Z4-85 ferrite brushed DC servomotor, SN: G12677, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Itodpfxot S Amzj Af Tjb

Stanje: dober (rabljeno), Servomotor, electric motor, DC motor, stepper motor, stepping motor Itedpfx Afehu Hwqo Tsb - Manufacturer: SEM, Brushless Servo Motor Type HR142G6-88S - Speed: 6000 rpm - Voltage: 530 V - Torque: 21 Nm - Shaft: Ø 24 x 50 mm - Brake: 24 VDC 40 Nm - Quantity: 2 motors available - Price: per unit - Dimensions: 425/142/H174 mm - Weight: 23.8 kg/unit

Stanje: dober (rabljeno), Servomotor, electric motor, DC motor, stepper motor - Speed: 2,500 rpm Ijdpfxscwb Nrs Af Tstb - Torque: 4.5 Nm - With gearbox, gear ratio: 1:10 - Design: B14 angle - Shaft diameter: Ø 25 mm - With Hohner encoder 11322 - Quantity: 1 motor available - Price: per unit - Dimensions: 480/260/H180 mm - Weight: 10.3 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8675, Dieser LSK157 Verpackungsmaschine vom Modell 8675 wird in ausgezeichnetem Betriebszustand angeboten. Die Maschine ist voll funktionsfähig. Baujahr: 2003 Isdpfet Aikzjx Af Totb

Stanje: rabljeno, vrsta goriva: električni, Control unit, controller section, interface, drive control, traction current control, inverter drive controller, drive controller - Manufacturer: Zapi, inverter drive controller from electric forklift Sichelschmidt M 1510 V - Model: SEM-1 - Part no.: 7020 0442 FS5002 - Voltage: 48 V - Dimensions: 210/150/H70 mm - Weight: 1 kg Isdpfx Asizugnef Tetb

Stanje: zelo dobro (rabljeno), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive graphical user interface (GUI) operating on Microsoft Windows XP Professional. Instrument configuration includes the following features: - Magnification range: 5x - 300,000x - Accelerating voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, including: Iodpfx Afsmn Rcqo Tstb - Graphical navigation on the specimen holder - Easy sample navigation via click-center-zoom - Field-of-view controlled navigation using two navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable specimen stage field-of-view process - Field-of-view correction during rotation via computer-controlled eccentric rotation - Field-of-view correction during tilting via computer-controlled eccentric tilt - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking when moving the sample in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel range: - x = 125 mm - y = 100 mm - z = 5 to 80 mm (stepless) - T = -10°C to +90°C - R = 360° (continuous) - Secondary electron detector for high vacuum operation - Innovative superconical objective lens to ensure highest image resolution even at high tilt angles - Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live image display from multiple detectors - Easy sample navigation via click-center-zoom - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile sample chamber with various expansion options: free flanges (e.g., for EDX, WDX, EBSD, cathodoluminescence, etc.) - Maintenance- and wear-free, quiet pumping system consisting of forepump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive fault protection to prevent operator error and external media failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool kit, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump instead of standard diffusion pump - When using a turbomolecular pump, no cooling water is required for SEM operation. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software license will be transferred to the new owner upon purchase! - Nitrogen-free, energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standards-free element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and instruction - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (See photos) Condition: used (Subject to change and errors in the technical data and specifications!)

Stanje: rabljeno, številka stroja/vozila: YV2A8A2C24A58xxxx, prevoženi kilometri: 530.000 km, Leto izdelave: 2004, Obrnite se na ATS Norway za več informacij. Prosimo, navedite referenčno številko ob povpraševanju: 20300 Specifikacije: Kilometri: cca. 530.000 Menjalnik: Ročni Retarder Pnevmatike (glejte slike) 6x2 Premična obrnjena plošča Popolno zračno vzmetenje 2 leti Radio/CD Klimatska naprava Vzdrževanje opravljate sami. Pripravljen za dostavo Opis: Volvo FH16 6x2 vlačilec s kip hidravliko za polpriklopnik s kiper nadgradnjo. Pripravljen za dostavo. Km: 530000 KS: 610 Tehnični pregled: Ne EU homologiran do: 27.02.2025 Lastna masa: 9340 Skupna masa: 27000 Nosilnost: 17585 Širina: 255 Dolžina: 665 Euro: 3 Model: 2004 Volvo FH16 6x2 vlačilec z kip hidravliko za polpriklopnik s kiper nadgradnjo. Menjalnik: Ročni Iedpfxowi Rmas Af Tjtb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1959, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.900 mm, skupna dolžina: 1.500 mm, skupna širina: 700 mm, skupna masa: 500 kg, Stroj za vgradnjo pohištvenih ključavnic Znamka: Weeke SEM/1 Leto izdelave: cca 1959 Podatki o stroju: Mere stroja (D/Š/V): cca 700 x 500 x 1750 mm S podvozjem in omejevalom: cca 1500 x 700 x 1900 mm Skupna teža: cca 500 kg Podroben opis na sliki z opisom funkcije Pnevmatsko vpenjanje prek nožnega stikala Premičen Iedpfougv Akjx Af Totb Uporaba: za vgraditev pohištvenih ključavnic, tečajev, zapiralnih plošč Stroj je popolnoma funkcionalen in očiščen. Zelo dobro stanje.

Stanje: pripravljen za uporabo (rabljen), Grinding width: 600 mm Ijdpfew Drfmjx Af Tetb First roller: rubber Second roller: rubber + manual adjustment pad 2 feed conveyor speeds Pneumatic oscillation Abrasive belt: 1520 x 600 mm Voltage: 380 V Year of manufacture: 2001

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, A textile cutting and winding line, consisting of several individual machines, is available. The system sews tubular bales together, cuts and rewinds them into large rolls (clubs). Working width for elastic/non-elastic fabrics: 1860mm/2400mm; shear width: 980mm; production capacity: 200 kg/h; tubular bale weight: approx. 30 kg; large roll weight range: 300 kg–500 kg; roll width: 1780mm; roller width: 2700mm; current fabric width: 1700mm; overall system dimensions (L/W/H): approx. 5200mm/4000mm/5200mm; total system weight: approx. 3000 kg. An on-site inspection is possible. Iedpfx Afsu Afzwo Tetb

Stanje: rabljeno, Leto izdelave: 1998, Used machine Year of manufacture: 1998 1 belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Ijdpsx Rpghjfx Af Tstb calibrating and fine sanding of solid wood calibrating of workpiece carrier boards sanding off faulty veneers and coatings intermediate sanding of PU, Hydro, UV, Nitro, and polyester finishes sanding of barrier foils with graphic operator terminal NC-controlled thickness adjustment from 3-150 mm enabling the calibration roller via terminal with patented CSD segmented pressure beam for compensating workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency-controlled: approx. 2-18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min With belt cleaning: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt Design 1st unit: Cross belt Sanding pad 1st unit: Electronic segmented pad Abrasive belt width 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller Design 2nd unit: Steel calibrating roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit Design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding pad 3rd unit: Electronic segmented pad, 32 mm wide Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor: Yes Feed speed, fixed: stepless 5 - 15 m/min Control: Screen control Elec./pneumatic belt oscillation: electric Infeed height: variable (lower table adjustable) Table adjustment: electro-motorised Table display: digital Working height or feed table height: 880 mm Location: Supplier Isdpfoxzi S Nsx Af Tjtb

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 9212071, Sanding width: 1300 mm Working height: 880 mm, fixed Max. workpiece thickness: 3-140 mm Transport bed: Equipped with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction unit Feed speed: 4.5–22 m/min, adjustable Processing units: Cross/Longitudinal/Longitudinal/Brush Brush roller unit: Centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Cross sanding unit: Wear-free braking system, pneumatic belt tensioning, belt tracking control Pressure lamella belt system, intermittent belt cleaning system Abrasive belt dimensions: 4900 x 150 mm Belt sanding speed: 12 + 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit: Infinitely variable, electronic speed control of the sanding belt via frequency inverter Itedpfoyakl Nex Af Tsb Wear-free braking system, pneumatic belt tensioning, intermittent belt cleaning system, infrared belt control Sanding belt runs counter to feed direction Abrasive belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal: For entering machine settings, includes digital thickness adjustment and indicators for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam: Distance between guide rollers: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the contour of the passing workpieces Weight approx.: 5,500 kg Space required: approx. 2550 x 2675 x 2400 mm

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. Itsdslqac Sepfx Af Tsb This also depends on tool lengths, machining lengths on the component, etc.

Stanje: rabljeno, Electric motor, three-phase motor - Power: 1.2 kW - Speed: 1400 rpm - Shaft: Ø 24 mm Itodpfjd Eqlljx Af Tob - Mounting type: B3 - Protection rating: IP 44 - Quantity: 1 motor available - Price: per unit - Dimensions: 335/127/H186 mm - Weight: 13.5 kg