Vijačni vtič

elumatec Atlanta SEM DG 204 539 05 040 DPM30E4

Leto izdelave: 2012, obratovalne ure: 3.496 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Quadra L1 in excellent condition with extremely low operating hours for sale. Available with additional setup upon request! Machine demonstration with profile possible. Bdjdpfx Asywpcvegtjb QUADRA L1 Throughfeed Centre with high-specification equipment: - 6 spindles, each rotatable 360° around the profile for machining at any desired angle - 7.5 meter bar loading magazine - 600mm saw and notching unit - Profile positioning system - MG Pilot handheld control unit - 2 steel front conveyors for scrap extraction - Slice software - CamPlus / Job software Installation / commissioning / training can also be provided by us! CNC 12-axis machining centre, designed for milling, drilling, and cutting operations on aluminium and other light alloys. The QUADRA L1 features an automatic tool magazine and a pusher-type feed system for profiles up to 7,500 mm, equipped with a profile clamping gripper drive. During operation, the loader can prepare the next profile while the feeder returns to the starting position after the collet advances. Milling and cutting units are centrally located: The CNC 4-axis milling module comes with 4 to 6 electrospindles, allowing full contour machining of the workpiece from any angle. The CNC 3-axis cutting module is equipped with a Ø 600 mm blade featuring a vertical cutting motion. The QUADRA L1 also includes an automatic discharge system, transferring profiles from the cutting unit to the outfeed magazine, capable of unloading machined workpieces up to 4,000 mm (7,500 mm optional) in length via cross belts. For operator safety and reduced noise, the machining unit can be optionally fitted with a central soundproofing cabin, which protects personnel and minimises acoustic emissions. Demonstration of the machine is available on request!

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, FOM Industrie ARGO 70 3-Axis CNC Machining Center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis (top only): 6,780 mm X-axis (top + heads): 6,630 mm Y and Z axis for machining on upper and rear sides: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer positions: 12 POSITIONING AND CLAMPING Clamping fixtures with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of clamping devices: 8 Bdodpolu E Nasfx Agtsb MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW Axis X speed: 100 m/min FEATURES - Multi-piece machining - Tool clamping system - Pendulum mode - Minimum quantity lubrication - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool magazine with 12 positions at the head - Operator terminal with PC - 23” monitor - 3D visualization for FomCam

Leto izdelave: 2005, stanje: rabljeno, CNC machining center for performing drilling and milling operations on aluminum or steel profiles. Configuration: 4 axes - Spindle head Constructed with light-alloy cross-slide system, ensuring significant weight reduction combined with high load resistance and maximum machining precision. - Electrospindle Designed by Fom Industrie, enables high performance at both low and high speeds. Power: 4 kW at constant torque Spindle speed: up to 12,000 rpm Positioning: 0° / 90° / 180° for machining on three sides of the profile Cooling: forced air Tool interface: ISO 30 DIN 69871 with tool presence sensor Tool clamping and release are performed mechanically. High-precision front and rear bearings ensure control of axial and radial stress during all machining phases. The electrospindle speed is managed by an inverter with: diagnostic display for fault signaling overvoltage and overcurrent protection automatic controlled tool braking resistor for brake power dissipation - Tool lubrication - Tool magazine Installed on the column in a protected position behind a rotating door, the tool magazine offers 6 slots and can rotate in both directions. Positioning is controlled by an absolute rotary encoder, ensuring precision and reliability in position recognition. Rotary movement is managed by inverter, ensuring high speed and accuracy in tool change. - Work area Located on the base frame, the work area features: No. 6 pneumatic vises (non-automatic) for clamping profiles Linear THK guides for precision and stability Pneumatic clamping Manual positioning, with position indicated on the control unit monitor. - Control console The control console integrates the operator interface consisting of PC, display, alphanumeric keyboard, and control keypad. It is movable for enhanced ergonomics and operational flexibility. Equipped with: Bdjdpfx Ajywhf Negtsb Connection for barcode laser reader Connection for remote control unit - Software: FomCam (Graphical interface based on Windows operating system for machining and part design; automatically generates the CNC program executable by the machining center) + Prof2 Windows XP Axis travels X axis – longitudinal travel 7,030 mm Y axis – transverse travel 1,100 mm Z axis – vertical travel 425 mm Electrospindle rotation 0°/90°/180° Dimensions Length 8,307 mm Width 1,875 mm Height 2,460 mm Weight 3,200 kg

Leto izdelave: 2010, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 8.500 mm, pomik osi Y: 480 mm, pomik po osi Z: 325 mm, največja hitrost vrtenja: 15.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Pomik X-os: 8.500 mm Pomik Y-os: 480 mm Pomik Z-os: 325 mm Najv. hitrost vrtenja: 15.000 min⁻¹ Vreteno: 5,5 kW Vpenjalo orodja: BT 30 PODROBNOSTI STROJA Bdsdpfx Ajypbmiegteb Izmenjevalec orodij: 8 pozicij OPREMA Orodja