Konzolni regali nakup rabljenega (102)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards Lhodjd Tqalopfx Abbeb - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Ledpfx Abjfdkb Ujbohb Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Lsdpfefdkbhjx Abbohb - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Lhedpfjmhhf Sox Abbjb When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Lhjdsmhhl Hjpfx Abbsb Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing Lodpfxjmidyfs Abbjhb - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: Lsdpfjmkixwex Abbohb - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Lsdpfxjqt Dmys Abbjhb Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, OHRA Cantilever Racking Negotiation Price: €5,940.00 net ex stock You are bidding on a rack with a length of 7.5 m, comprising: - 6 uprights with base, 6 m high - 4 adjustable cantilever arms per upright (120 cm), load capacity 900 kg per arm. Diagonal braces, stiffeners, and spacers are included. Bridges, wire mesh, and chipboard shelves are available separately at an additional cost! Frame spacing: 150 cm Arm length / Cantilever: 120 cm Load capacity: 900 kg / arm Load capacity per upright per side: 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m, or 4 m also available. Other configurations on request. (Specifications, technical data, and prices are subject to change and availability. Please refer to our General Terms and Conditions. All prices are ex works, excluding VAT.) Purchase / Sale We are constantly seeking and offering a wide range of items from various sectors: - Machines from all industries - Surplus stock Lhodpfeby Uunsx Abbeb - Special lots - Thoroughly swept company clearances - Company liquidations - Purchase of excess stock Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Send us a brief enquiry and we will get back to you immediately.

Stanje: dober (rabljeno), Cantilever racking OHRA 3 m high Over 100 meters in stock – see photos. Height: 3 m Arm length: 100 cm Load capacity per arm: 800 kg 4.5 linear meters, 4 uprights with arms Ljdpfxecd Dwyj Abbshb Negotiable price: €2,160,-- / net The offer includes: 4 uprights with base, each 3 m high 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Diagonal braces, cross bracing, and spacers are included. Frame spacing: 150 cm Load capacity per upright side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m available Other configurations available on request: Constant stock of over 3,000 linear meters of pallet racking from various manufacturers. Transport and assembly available on request. (Subject to changes and errors in technical data, information, and prices as well as prior sale! Please see our terms and conditions; all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for or offering a wide range of products from various sectors - Swept clean site clearances - Company liquidations - Fast, flexible, efficient! We also clear or dispose for insolvency administrators. Send us a few keywords and we will get back to you promptly. To visit our page, please click on our logo!

Stanje: zelo dobro (rabljeno), skupna širina: 4.000 mm, skupna višina: 7.000 mm, razmak između stupova: 2.000 mm, dolžina police: 900 mm, Oprema: dvostranski, Sestavljen iz 3 dvostranskih stebrov višine 7000 mm 9 polic z nosilci dolžine 750 mm Nosilnost police: 900 kg Lhjdpfjulufpox Abbeb Nosilnost nivoja: 2700 kg Nosilnost na prednjo stran stebra: 8100 kg Razmak med stebri: 2000 mm

Stanje: rabljeno, Dvostranski konzolni regal za palice (samoizdelava) Ljdpfx Aboxf Ut Hobohb Skupna višina: 1,9 m Dolžina regala: 4,3 m Razmak med stebri: 2000 mm Odlagalne police: 600 / 500 / 450 in 400 mm Nosilnost na odlagališče: cca 200 kg Nosilnost na raven (nosilnost pri 3 stebrih): cca 600 kg Skupna nosilnost pri 3 stebrih: cca 4800 kg Širina podnožja: 1000 mm - 3 stebri = 2 polji = idealno za 6-metrske palice - Stebri iz U-profila 100 x 50 x 9 mm - Nosilne roke iz U-profila 100 x 50 x 7 mm - 8 odlagališč na steber (skupaj 24 privarjenih nosilnih rok) - 3 dvostranski stebri z osnovnim delom - Prišrafljene povezave stebrov iz pravokotnih cevi - Manjkajo diagonalni nosilci Dimenzije postavljenega regala D x Š x V: 4400 x 1450 x 1900 mm Dimenzije za transport D x Š x V: 2100 x 1500 x 500 mm Skupna teža: 350 kg

Stanje: zelo dobro (rabljeno), Height: approx. 2000-4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted base profiles Made from hot-rolled IPE sections Finish: high-quality industrial paint RAL 5010 Cantilever arms freely adjustable in 100 mm increments Racking uprights: base and cantilever arms bolted Increase in storage capacity with reduced floor space Organized storage of long goods Price: €400/net per upright, incl. We will assemble your custom racking system. Feel free to contact us. We also buy used racking. Please send photos and dimensions—we’ll make you an offer. Contact: Brennholz Blum - Mr. Dominik Blum Upon request, we can also deliver your racking. Lhedpfep Dukqox Abbsb If you have any questions, just call or write us.

Stanje: novo, Leto izdelave: 2025, Cantilever rack for light loads, single-sided, frame height 2m, rack length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – Brand new: Price ex location incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: Brand new Type: Super Light Set components: 4 uprights with 5 arms / 3 bays with connectors Lhedpexbz Ddofx Abbjb Upright spacing: approx. 1m Total assembly length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – manufactured from IPE 100 profile with permanently welded arms spaced at approx. 330mm. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Including floor anchors Including load capacity sign Description: 4 uprights at 1m axle dimension as a set including bolts. Key advantages: Easy assembly – the rack is designed for effortless installation. Versatile – whether in the garage, workshop, or small niches, the rack adapts flexibly. Safe & practical – the arms made of rectangular tubing are fitted with plastic caps to prevent injuries.

Stanje: dober (rabljeno), Leto izdelave: 2005, Cantilever rack, double-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels - ideal for storage of goods on Euro pallets, for example - used: Price ex location: €24,500 (net) including disassembly and loading! Price for partial quantities upon request – minimum order: by rack! Manufacturer: Bruckamp Regalsysteme Type: unknown Year of manufacture: 2005 Max. load per arm: 2,000 kg Bolted arms Max. load per upright: 2 x 2,000 kg Projection per arm: 120 cm (IPE 100 standard) Total rack height per unit: 2.90 m (IPE 160) Number of uprights: 69 pcs (currently 3 x 23 pcs) Frame spacing (distance between uprights): 1,240 mm The heights of the intermediate levels and the top levels are fixed and predetermined. Relocating them is possible by drilling new holes; no pre-drilled holes are present. Variant / Rack A: Three sections on both sides Variant / Rack B: No central divider Variant / Rack C: Central division only on the right Condition: good Available: immediately Location: Schweinfurt / Würzburg area Ledpfxewi I Tdo Abbshb

Stanje: zelo dobro (rabljeno), nosilnost na konzolno roko: 330 kg, višina police: 2.500 mm, razmak osovin: 1.250 mm, dolžina police: 5.200 mm, Cantilever Rack H 2500 mm Manufacturer: BITO Length: approx. 5.2 meters Height: 2500 mm Load capacity per arm: 330 kg Cantilever arms, length 600 mm Column spacing: approx. 1250 mm Lhsdpfxowzzrqe Abbjb Total rack depth: 1340 mm The cantilever rack consists of: * 5 columns with base, made from IPE 140 profile, column height 2500 mm * 35 cantilever arms, length 600 mm, load capacity per arm 330 kg * Braces, bolts, connectors Total weight: approx. 500 kg Price: 1,000 EUR net 2 sets available

Stanje: novo, Cantilever rack, single-sided, frame height 2.60m, 80cm deep arms, 750kg per arm, hot-dip galvanized – New item: Lodpfenwmwvjx Abbjhb Price ex works incl. loading! Price: €1,480 (net) Transport/packaging costs within Germany (excluding islands): €400 (net) Of course, you can also construct longer or shorter racking units by omitting or purchasing additional frames (or by varying the center distances between frames), this example with 4 frames merely reflects the most common racking configuration! Cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new item Description: - Single-sided rack uprights, height 2,600 mm, hot-dip galvanized - Base and arm depth: 800 mm - Each with 3 height-adjustable rack arms - Load capacity at a load center of 400 mm - 750 kg per arm / 2,250 kg per upright - With 4 uprights per storage level: 4 x 750 kg = 3,000 kg Profiles: Uprights: IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing The standard frame center distance is 1.30 m. Other standard center distances available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m From a length of 1.50 m onwards, a small surcharge applies to the stated price! Custom dimensions (different frame spacings) are also available on request but also incur a surcharge and have a longer delivery time as they must be custom-made! Unless otherwise specified, racks are delivered with a center distance of 1.30 m. In this case, the total length for a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany via parcel direct from Würth), ground anchors not included. When using more arms per upright, please note that the specified maximum load capacity per upright must not be exceeded, i.e., the maximum usable arm load decreases accordingly. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at a surcharge), photos attached: - Base with load protector - Base with large load protector - Base with wheel guard - Cantilever arm with load protector - Cantilever arm with plug-in roll-off guard - Clamp-on roll-off guard - Grating - Conversion for pallet storage Photos show example single-sided racks and the materials used.

Leto izdelave: 2021, Stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Lhjdpfx Abof Tv T Nobsb Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: zelo dobro (rabljeno), Konzolni regal, obojestranski, 10 nivojev, izteg 380 mm, izvlečen za 220 mm, višina 2420 mm, skupna globina 1000 mm, dolžina približno 2700 mm. Konzolni nosilci iz 80 mm U-profila. Zelo stabilna izvedba. Regal je vroče pocinkan. Teža 1190 kg. Regal je za transport razstavljen. Lhedpfxjw Icyus Abbeb

Stanje: novo, Leto izdelave: 2020, Cantilever racking, single-sided, 6.30 m height, 1.20 m arms, 900 kg per arm — New —: Price ex works, including loading! 1 rack unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! A galvanized cantilever racking system, consisting of: Single-sided uprights, approx. 6,300 mm high, hot-dip galvanized Base and arm depth: 1,200 mm, each with 3 height-adjustable arms Load capacity with load center at 600 mm: 900 kg per arm / 4,000 kg per upright With 4 uprights per arm level: 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE100 Ljdefivg Sjpfx Abbehb Incl. horizontal and diagonal bracing, bay width = 1,300 mm, standard is 1.30 m. Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a surcharge applies to the stated price! Custom sizes (other bay widths) are also available on request, but incur a surcharge and have longer lead times as they require custom fabrication! If you do not specify a different bay width, we will supply the racking with a standard width of 1.30 m. In that case, the length of a racking row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), excluding floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, Stanje: novo, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New – : Price ex works incl. loading! 1 racking unit with 4 uprights €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can configure longer or shorter racking units (also possible by varying the bay spacing); the example with 4 frames is merely the most common rack solution! Lsdpfx Aefivg Rebbohb A hot-dip galvanized cantilever racking system, comprising: Single-sided upright approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with load centre 600 mm: 500 kg per arm / 4,000 kg per upright With 4 uprights per storage level: 4 x 500kg = 2,000 kg Profiles: Uprights: IPE220, Arms: IPE 80 With longitudinal and diagonal bracing, bay spacing = 1,300mm; standard is 1.30m. Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For bay spacings 1.50m and above, a small surcharge will apply to the stated price! Special sizes (other bay spacings) are also available on request, but incur extra charges and have a longer delivery time as they are custom manufactured! If you do not specify otherwise, we deliver the racking with a bay spacing of 1.30m. In this configuration, an installation with 4 uprights (3 bays) is approx. 4m in length. Delivery includes all bolts and nuts (dispatched within Germany by parcel directly from Würth), but excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, Stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile Ledpfefivhfjx Abbehb with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Leto izdelave: 2020, Stanje: novo, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay distance). This example with 4 uprights is simply the most common configuration! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160/100 - each with 2x3 adjustable arms, 1.20m long, 750kg capacity per arm - with bracing, approx. 1.30m - Uprights double-sided, approx. 3,500mm high, galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1,300mm, standard is 1.30m. - Other standard bay sizes available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m bay length onwards, a small surcharge applies to the listed price! - Custom sizes (other bay distances) are available on request – these also incur a surcharge and have a longer delivery time as they are made to order! Lsdpfxsfivhgs Abbehb - If no alternative bay distance is specified, we will supply the racking with a standard bay distance of 1.30m. - With 4 uprights (3 bays), the rack length is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2021, Stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Ledpsddmq Tjfx Abbohb Photos show a similar rack!

Leto izdelave: 2021, Stanje: novo, One racking unit with 4 uprights €2,120 (net, excl. VAT)! Lodpfjddmqnox Abbshb Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, excl. VAT)! Of course, by omitting or purchasing additional uprights, you can also build longer or shorter rack units (or by using different bay spacings); this example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each level with 3 height-adjustable arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal bracing, bay width = 1300 mm (standard is 1.30 m). Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a small surcharge applies in addition to the stated price. Special dimensions (other bay spacings) are available upon request, but these also incur a surcharge and have a longer delivery time, since they are custom-manufactured! If you do not specify a different bay spacing, we will supply the rack with a 1.30 m bay spacing. In that case, the length of a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all screws and nuts (shipping within Germany by parcel service directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!