Konzolni konzolni

Cantilever BI-front

Leto izdelave: 2018, stanje: dober (rabljeno), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Automatic clamp positioning Two separate work zones suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X-/Y-/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h Dedpfxox Diqws Aplskl

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Dkedpfx Apsyh Nfuslel Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Delivery terms: ex stock

Stanje: novo, Leto izdelave: 2025, Učinkovita dolžina rezanja cevi: 6500 mm/9200 mm Izhodna moč laserja: 6000W/3000W/2000W/1500W Učinkovit premer za rezanje okroglih cevi: Φ20–230 mm Učinkovit premer za rezanje kvadratnih cevi: □20×20–□160×160 mm Dolžina roba: 20–170 mm Zunanji premer: ≤230 mm Certifikati: CCC, CE, GS, ISO, SGS Znamka laserskega vira: IPG/MAX Garancija: 3 leta Napajanje: 110V/220V/380V, 50 Hz/60 Hz 1. Večje od večjega Maksimalni premer rezanja serije T je za 30 % večji od povprečnih izdelkov na trgu; maksimalna teža rezanja je 100 % višja od standardnih izdelkov na trgu. 2. Nadzor pozicije vpenjalne glave in nadzor navora CNC samozcentrirna vpenjalna glava s samostojnimi intelektualnimi pravicami omogoča samodejno vpenjanje materiala glede na vneseno dimenzijo cevi; nadzor pozicije v načinu navora zagotavlja, da se debela cev ne zrahlja in tanka cev ne deformira. Popolnoma nova proti-prašna konstrukcija omogoča dolgo življenjsko dobo in nemoteno delovanje. Dkodpeg Dgbhofx Aplel 3. Iskanje roba in središča Novopridobljena funkcija iskanja roba in središča. Optimizirana metoda in algoritem za iskanje roba zagotavljata večjo natančnost in stabilnost pri rezu.

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Dkjdpfx Apou R Szaelol Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Dkjdpfx Apswu Ez Nolol

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Djdpfxjdy Hm Do Aplokl Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Dkedpfeucfwpsx Aplol

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance Dksdpfeh Ek Dajx Aplol - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, as well as other types, as a package Dsdjf Ddzqjpfx Aplekl

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight: approx. 0.9 t Dkodpfx Asgvwgcspljl Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)