Stroji za lepljenje robnih trakov nakup rabljenega (575)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Lhedpjyqybuefx Adkod Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Lsdpfxsyqx U Hs Adkjhd Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AH/335516, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 68 A, Oprema: CE označba, TEHNIČNE PODROBNOSTI 1. Enota: Razpršilna naprava Orodja priložena Lsdpfjyuyluox Adkohd 2. Enota: Lepilni agregat 3. Enota: Pritrdilni valji Orodja priložena 4. Enota: Kap agregat Orodja priložena 5. Enota: Grobi rezkalni agregat Orodja priložena 6. Enota: Agregat za zaokroževanje robov Orodja priložena 7. Enota: Radijusni vlekalni agregat Orodja priložena 9. Enota: Ploski vlekalni agregat Orodja priložena 10. Enota: Krtačni agregat Orodja priložena PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 68 A Število transportnih paketov: 2 OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, številka stroja/vozila: 20.082, Funkcionalnost: popolnoma funkcionalen, moč: 16,2 kW (22,03 KM), vhodna napetost: 400 V, skupna višina: 1.670 mm, skupna dolžina: 6.000 mm, skupna masa: 2.200 kg, TEHNIČNE PODROBNOSTI Število obdelovalnih enot: 10 Lhedpfxjyuyfzj Adkjd 1. Enota: Enota za predrezkanje Orodja so vključena 2. Enota: Lepljenje 3. Enota: Pritiskalni valji Orodja so vključena 4. Enota: Krajšalna enota Orodja so vključena 5. Enota: Groba rezkalna enota Orodja so vključena 6. Enota: Enota za zaobljenje robov Orodja so vključena 7. Enota: Fina rezkalna enota Orodja so vključena 8. Enota: Enota za zaobljenje robov Orodja so vključena 9. Enota: Enota za vlečenje radija Orodja so vključena 10. Enota: Sčesalna enota Orodja so vključena PODROBNOSTI STROJA Napetost: 400 V Moč: 16,2 kW Dimenzije in teža Dimenzije (D x Š x V): 6.000 x 1.415 x 1.670 mm Teža stroja: 2.200 kg OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 42 A, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Oprema: CE označba, TEHNIČNI PODATKI Število enot: 9 1. enota: Enota za predrezkanje Orodja vključena 2. enota: Enota za lepljenje 3. enota: Pritiskalni valji Orodja vključena 4. enota: Enota za kapiranje Orodja vključena 5. enota: Enota za zaobljenje robov Orodja vključena 6. enota: Enota za vlečenje radija Orodja vključena 7. enota: Enota za zaobljenje robov Orodja vključena 8. enota: Enota za vlečenje ploskev Orodja vključena 9. enota: Sčetkasta enota Orodja vključena PODROBNOSTI STROJA Lhodpfeyux Riex Adksd Napetost: 400 V Tok: 42 A Dimenzije (D x Š x V): 4.800 mm x 1.000 mm x 1.800 mm OPREMA Lepilni lonec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 200.04.007.13, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 1.700 mm, skupna dolžina: 4.800 mm, skupna širina: 900 mm, TEHNIČNE PODROBNOSTI Min. višina obdelovanca: 8 mm Maks. višina obdelovanca: 60 mm PODROBNOSTI O STROJU Lsdpfxjyux Egj Adkohd Moč: 11 kW Omrežna napetost: 400 V Tok: 28 A Faze: 3 Frekvenca: 50 Hz Dimenzije in teža Dimenzije (D x Š x V): 4.800 x 900 x 1.700 mm Teža stroja: 1.250 kg OPREMA Multifunkcijska rezkalna enota Predrezkalna enota Oblikovalska rezkalna enota Lepljenje enota

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Lhsdpjytr Hbefx Adkjd Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking Lodpfx Adoytr Rgskehd The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 0-261-04-6588, Funkcionalnost: popolnoma funkcionalen, moč: 21 kW (28,55 KM), višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, skupna dolžina: 6.060 mm, skupna masa: 2.600 kg, The machine has the following configuration: Emulsion spray at infeed and outfeed Edge preheating Pre-milling unit: Tool diameter: 100 mm, tool height: 63 mm, diamond tool with interchangeable knives, motorized distance adjustment Glue application unit: Glue and hot air application, heated applicator roller, quick change of the entire unit, automatic positioning via motor, 3 pressure rollers, edge feed speed: 14 m/min Cut-off unit: Twin-motor unit with automatic tilting up to 15°, THK prism guides Radius milling unit: 2 tools, automatic adjustment in two axes, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL SPECIFICATIONS Workpiece thickness: 8–60 mm Feed speed max.: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double upper pressure for part stability Electronic thickness control Frequency inverter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control panel Lhedpfx Adjyu If Nsked

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Lodpoywuvnjfx Adkehd Na zalogi v Lieboch

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Ljdpfxjywh Epo Adkshd Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Lsdpfeywh A Iox Adkehd Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm Lhsdpfeywhv Uox Adked PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit Lhedpshy Tlrofx Adkjd with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device Ljdpfxol D Rp Ej Adkshd HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system Lhedpfxsc S Di Ro Adked ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed Lhodpfxolc Ewij Adked COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!) Ljdpfxofbr S Rs Adkohd

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm Lhodpsbahd Eefx Adked - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Ledpfxsc Tmyge Adkshd Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt-lepilni sistem, primeren za uporabo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za lepljenje za spajanje ivernih plošč Avtomatski valjčni magazin Avtomatski magazin za robove Dvojna kapalna enota s samodejnim nagibom 0° / 3° Lsdpsyuvbljfx Adkehd Rezkalna enota za ravnanje robov - rezkanje na ravno - 12 mm Fino rezkanje RADIUS - rezkanje radija - profilni nož R2 - R5 Avtomatizirano kopirno rezkanje - zaokroževanje vogalov Vlečna rezkalna enota - radij - faza Ravna vlečna rezkalna enota Enota za pršenje sredstva za drsnost - PU Komplet za čiščenje z enoto za fino poliranje Zelo stabilna delovna podlaga z valjčnimi tirnicami - SPREDAJ s škarjastim izvlekom Popolna oprema orodij vključena Stroj je KOT NOV v IZJEMNO DOBREM STANJU Stroj iz upokojitve Prvi zagon leta 2009, zelo malo delovnih ur Možnost leasinga Iz zaloge Lieboch

Stanje: dober (rabljeno), Leto izdelave: 2017, V imenu stranke ponujamo naprodaj približno 10 let star stroj Biesse v dobrem stanju. Primerna naložba za začetek nove proizvodnje z nizkim proračunom. Ljdpfx Adoywup Ujkohd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 55 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: pnevmatičen, nastavitev nagiba žaginega lista: 10 °, Ponujamo zelo dobro ohranjeno robno lepilko HOLZ-HER SPRINT 1310, letnik 2005, vključno z Ott Rondomat. Proizvajalec: HOLZ-HER Model: SPRINT 1310 Letnik: 2005 Prodam servisirano robno lepilko Holz-Her Sprint 1310 Popolnoma delujoča! Težka izvedba – debelina robu 0,4–12 mm Krmiljenje preko SPS zaslona Popolnoma avtomatski magazin za robni trak v rolah in trakovih Lepilna postaja za vložke + PU lepljenje avtomatska tipalna šoba Višina obdelovanca 6–55 mm Krajšalna enota nastavljiv nagib žage od 0–10° Rezkalna enota, poravnalno rezkanje do 12 mm, profilno rezkanje Strgalna enota za posnetje in radije z dvema pnevmatskima nosilcema strgal Lhsdpfx Ajycgabsdksd Enota za površinsko strganje – finiš Vključno z Ott Rondomat za obdelavo robov

Stanje: dober (rabljeno), Koda: 0300 Znamka: CASADEI INDUSTRIA Model: V320 - CE Standard Ledpfx Aeyk Hgkedkjhd Avtomatski robni lepilnik za že predlepljene robove, primeren za mizarje, pohištveno industrijo, izdelavo pohištva po meri, vrata, panele in različne izdelke – CE standard. Lastnosti: - Avtomatski zgornji podajalnik z zobatim jermenom, hitrost 5 m/min, višina nastavljiva z ročnim kolesom in številčnim prikazom položaja - Vhodno vodilo - Pnevmatske škarje za odrez koluta - Avtomatski pnevmatski čelni zarezni rezalniki spredaj in zadaj - Zgornji/spodnji čelni rezalniki pri 11.000 obr/min s 4-rezilnimi rezalniki - Delovna površina 1800 mm s 7 nastavljivimi valji in drsnimi poliženskimi vodili - Izvlečna sprednja podpora za velike panele Tehnični podatki: - Min./maks. debelina panela: 10–45 mm - Debelina roba v kolutu: 0,4–2 mm - Min. dolžina panela: 220 mm - Min. širina panela: 110 mm - Enota za lepljenje: moč grelca LEISTER W 3400 – nastavitev temperature - Skupna instalirana moč: 2 kW - Premer odsesovalnega priključka: 120 mm - Skupne dimenzije (mm): 1800 x 700 x 1300 (v) - Teža: 236 kg

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Technical data: Minimum workpiece length (mm): 160 Lhedpfxjyvwk Ss Adkod Workpiece thickness (mm): 6-60 Edge thickness (mm): 0.4-6 Feed speed (m/min): 10 Total length (mm): 4930 Weight (kg): 1420 Equipment: Control system with 15" touch screen Jointing unit with 2 milling heads Edge feed GluJet adhesive application system 2.3 kW, automatic glue height adjustment, sensing nozzle Pneumatic pressure unit Pneumatic end trimming unit Diamond cutters left + right with CM technology Corner rounding unit with diamond cutters Surface scraper Buffing unit Special equipment: Extendable workpiece support Motorized pressure bridge adjustment with NC-axis via program control Diamond jointing cutters left + right Extraction hoods for end trimming unit MOT 4 multifunction milling unit Vertical sensing rollers pneumatic Pneumatic tilting device for milling unit MOT 4 Scraper unit MOT 2 with chip collection box Spraying device for infeed and outfeed area Availability: upon agreement Location: Röllbach