OBDELOVALNI CENTER

SCM MORBIDELLI M800 X5

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, SCM Olimpic K 560 Automatski stroj za kantiranje, godina 2018 na prodaju! Kompletacija: - Lančani transport s brzinom 12/18 m/min - Debljina trake za kantiranje: 0,4–3 mm - EVA ljepilo - Jedinica za glodanje ploča "RT-V" Nedpfx Ajw Sw Tksdvskw - Jedinica za nanošenje ljepila „VC-S4.1“ - Jedinica za rezanje ruba "K-SEL" - Jedinica za glodanje ruba "R-K" - Jedinica za zaobljenje kutova "ROUND X" - Jedinica za struganje ruba RAS-K - Jedinica za poliranje SP-V Tehničke karakteristike: - Brzina transportera (dvije brzine) m/min: 12 - 18 - Minimalna/maksimalna debljina obratka mm: 8 - 60 - Debljina lijepljenog drvenog ruba mm: 0.4 - 6 (8 mm kod HP kompozicije) - Debljina lijepljenog rubnog traka mm: 0.4 - 3 - Maksimalna površina lijepljene trake mm²: 135 - Promjer nosača kalema („tanjur“) mm: 780 - Maksimalno preklapanje lijepljenog ruba u odnosu na obradak mm: 2+2 - Minimalni razmak između transportiranih komada mm: 600 - Minimalna duljina obratka (pri minimalnoj širini od 100 mm) mm: 140 - Minimalna duljina trake mm: 180 - Minimalna duljina drvenog ruba mm: 220 - Minimalna širina obratka (pri minimalnoj duljini od 210 mm) mm: 95 (60 mm opc.) - Širina produžetka stola mm: 560 - Visina radne površine od poda mm: 900 Jedinica za glodanje ploča „RT-V“: - Maks. površina skidanja odvarka mm²: 55 - Maks. debljina glodanja mm: 3 - Minimalna/maksimalna debljina obratka mm: 8–45 (60 mm opc.) - Snaga motora kW: 2 x 1,5 - Promjer glodala mm: 100 - Visina glodala mm: 49 (64 mm opc.) - Brzina rotacije alata o/min: 9.000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm Nkedpfx Adowlbxlovow PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning Nksdjwka Upjpfx Advew - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Stanje: zelo dobro (rabljeno), Olupilnik okroglega lesa VK450 2RE. Opremljen z dvema rotorjema. Eden je rotor za frezanje štorov. Drugi je luščilni rotor. Min–maks premer lesa 8–45 cm. Minimalna dolžina lesa 3 m. V kompletu z originalnim VK centrirnim transporterjem. Bo prodan po generalnem remontu. Nkodpfxoulv Hzo Advew

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Nkedpfx Asxraimjdvjw Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Leto izdelave: 2024, stanje: novo, This CNC milling machine is an excellent tool for taking your hobby to the next level. The 0404 mini is both practical and compact, making it suitable for any workshop. The Wattsan benchtop milling machine can process wood, plastic, plexiglass, aluminum, brass, and more. The cast iron frame of the Wattsan 0404 mini ensures accuracy and stability for all types of demanding operations. It is capable of 3D milling. Our CNC milling machine features a T-slot table, allowing you to secure parts using screws, clamps, or a mechanical holding device. You can call our managers for further details! Wattsan 0404 mini specifications: Working area: 400 x 400 mm Spindle: 1.5 kW Machine dimensions: 710x710x740 mm Packaging dimensions: 860x860x810 mm Weight: 155 kg Virmer not only offers premium machines, but also provides service and delivery. Our engineers and managers are ready to answer all your questions and, if necessary, provide video support. Additionally, Wattsan device owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding equipment, marking devices, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops through customer feedback. Thanks to this feedback, Wattsan has implemented over 50 upgrades, making its machines more reliable, precise, and efficient—enabling you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR TASK. Nodoiinkkepfx Advskw If you are looking for the right laser or CNC milling machine, we are at your disposal. You will find a wide range of laser machines and equipment with us: CO2 laser machines; metal laser cutting machines; metal laser cutters; fiber metal lasers; fiber metal laser engravers; CNC metal milling machines; wood milling machines; CNC milling machines; laser engraving machines; laser engravers; plywood laser cutting machines; laser engravers; metal laser cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm Nkodpfxsxranpj Advjw 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor Nodpfx Adou Hmacevjkw debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Nodpfjwwiybjx Advjkw Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet No. 1 vacuum pump

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec Bruks long log infeed system with root reducer, comprising: - Infeed cross conveyor with 6 chain strands, split drive. - Holtec hydraulic step feeder with split drive. - Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. - Holtec heavy-duty conveyor belt for round timber. - Waste scraper conveyor and distribution screw. Njdpewxck Ajfx Advskw