Luhoma nakup rabljenega (3)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good, nearly new condition. The machine comes from a very small joinery and has had very little use. The machine is in its original state; only cleaned, with the paintwork untouched. With this machine, you can mill elongated slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill elongated slots for lock cases, for example, and similar applications, or create all types of frame dowel joints—right-angled, butt, and mitre joints. Ideal for dowel joints in timber frame construction, furniture, door, window, and staircase production, as well as similar applications. Thanks to drilling on two levels, the index rails, stops, and the machine’s setup, dowel joints can be produced in the shortest time, making the machine highly efficient. Requires a compressed air supply of 6 bar (very low air consumption). Gedpfx Agoynv E Royobi Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (a centre stop and a side stop, which can be used on either side). Also includes a mitre stop. At the front of the machine table, there is a 2000mm-long guide rail with two flip stops. The rail can be shortened or extended as needed. Workpieces are clamped using 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic. The pneumatic switch is at the front of the machine, enabling quick adjustment of indexing and drilling levels. Fitted with a precision 12mm indexing rail, featuring a centre position and 12 positions to the left and right. Can be quickly converted for slot-milling; the machine can then be used without the indexing system and with two adjustable stops left and right, offering a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything works perfectly. We offer nationwide delivery and demonstration within Germany for 220.00 EUR, so you bear no risk when purchasing. Delivery to Austria and other EU countries available on request. Machine table width: 870mm; depth at sides: 140mm; depth at center: 350mm Professional-grade equipment, not DIY store quality. Ready for immediate use. Fitted with 2-jaw drill chucks up to 20mm. Very robust and durable construction. The precision linear guides with backlash-free ball bearing bushings are fine and operate smoothly.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a small joinery that unfortunately closed down Everything works perfectly All bearings and guides are in good condition Year of manufacture: 1991 Gsdpfx Asyl Sp Hegyebi Depth adjustment of the fence jaw with fine adjustment and scale, allowing for jointing or profiling work, e.g. on a glue joint profile. The entire fence can also be depth-adjusted via a handwheel and leadscrew, enabling very precise and quick settings Equipped with AIGNER integral fence With spindle lock by lever Excellent chip extraction with two extraction ports (125 mm on the fence, 100 mm on the machine table) Fitted with a 30 mm spindle, continuously tiltable from -5° to 45°, spindle tilt is motorized with a highly accurate digital display Forward and reverse rotation Delivery and demonstration within Germany for 220.00 EUR, offering you a risk-free purchase. Shipping to Austria and other EU countries available upon request Large table opening up to 480 mm, adjustable using various rings (enabling use of large diameter cutters and safe operation even with smaller cutters) Spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle height adjustment is also motorized and features a highly accurate display The table is made of high-ribbed cast iron Exchangeable spindle (optionally a 40 mm spindle can be used) Very robust and durable build, constructed for heavy-duty milling tasks, suitable for all routing applications Optimal power transmission via V-belt drive Supplied with manual Comes with 3-roller feed unit HOLZ HER, Type ET 117 Feed unit features forward/reverse and 8 speeds; feed rollers are individually mounted Table dimensions: 1180 mm wide, 800 mm deep Ready for immediate use 380V Equipped with extra powerful motor: 7500 W and 9500 W (two-speed motor) Complete with all necessary safety features, motor brake, and emergency stop switch. The machine is BG-certified for woodworking and carries the GS mark Approximate weight: 1200 kg With motor protection switch against overload Professional-grade machine—no DIY store junk Optimal, simple, fast, and safe operation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Dowel and Slot Mortising Machine HOFFMANN HR 150 Very good condition, like new; the machine comes from an assembly company and shows almost no signs of use, absolutely as new, only used for a few modification jobs and is now being sold as it has been idle for the past few years. Godpfx Aoyhzilegyjbi Allows slot mortising and dowel boring at two levels without re-clamping. With manual included. 380V, 1500W 2840 rpm Year of manufacture: 1997 With this machine, you can mill slots for e.g. lock cases and similar items, and produce all types of dowel joints at right angles, butt joints, and mitred joints. Ideal for timber frame construction, furniture, door, window, and stair manufacturing and similar applications requiring dowel joints. By drilling on two levels, using indexers and stops, and due to the machine’s set-up, dowel joints can be produced in the shortest possible time, making the machine highly economical. Requires compressed air connection of 6 bar (very low air consumption). Right-hand rotation. Milling and boring is performed very well and cleanly. Fitted with transport chassis. Comes with two stops left and right on the machine table; an additional 45° mitre stop included. Comes with two fold-out workpiece supports. Three drill holders included: for drills with 16 mm or 12 mm shank, and for drills with M10 thread. Workpiece clamping is performed with two pneumatic clamping cylinders operated by a foot pedal, allowing you to hold the workpiece with both hands. Height adjustment between boring levels is also pneumatic; pneumatic switch is located at the adjustment lever for indexing, enabling quick adjustment between indexes and boring levels. With precision 12 mm indexing rail, featuring a centre index and 13 indexes left and right. Both boring levels feature a highly accurate counter, making fast, precise height adjustment of both levels possible. Can also be used as a slot mortising machine, with two adjustable stops left and right, and has a maximum traverse of 500 mm widthwise. Fitted with a stop rail at the front of the table, which can be lowered as needed. Maximum boring height approx. 100 mm. Maximum boring depth approx. 150 mm, with depth stop. Maximum workpiece height approx. 250 mm. All functions operate flawlessly. We offer personal delivery and demonstration anywhere in Germany for €220, so you take no risk with your purchase; delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep. Professional equipment, not DIY-store junk. Ready for immediate use. Very stable and durable construction. Precision guides with play-free ball bearing bushes are OK and run smoothly. Very robust and torsion-resistant design.