Stiskalnica za telo

Gannomat Concept 70 Eco

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Gedpfx Afeb Eln Deqjuc Location: ex stock 54634 Bitburg

Stanje: rabljeno, Leto izdelave: 2024, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Compact 3001.15P Letnik: 2024 Guodpfxeytqmmj Afqjc Delovno območje: 1.500 x 3.000 mm 1 x plazemski gorilnik z virom Kjellberg Q1500 s avtomatsko plinsko konzolo za O² (O², N²) 1 x filtrirna naprava TEKA za zunanjo postavitev 1 x program za razporejanje na krmilju stroja Razpoložljivost: takoj

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Technical Specifications: Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available - Gjdpfx Afey Egz Ssqsuc

Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine! List price: €32,665 – Complete in standard configuration with: Sturdy, torsion-free steel frame in welded and bolted construction – TOP lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements – Lamella pressure beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints – Counterpressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support panels – Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam – Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir – Pressing is performed electromechanically by two separate worm gear motors (2 x 0.75 kW) – Pressing force of the pressure beams is infinitely adjustable via two potentiometers and regulated by frequency converters, making the pressure regulation absolutely wear-free – Pressing force for the horizontal beam: min. 500 daN (kg) up to max. 2200 daN (kg), stepless – Pressing force for the vertical beam: min. 300 daN (kg) up to max. 2200 daN (kg), stepless – Pressing and adjustment speed of the beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second – Simple operation via 6 separate push-buttons, 8 movement sequences selectable via control unit – Freely adjustable pressing time preselection with automatic opening (0–30 min, switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm | Height min: 150 mm, max: 1400 mm | Depth: 700 mm – Weight: approx. 1800 kg net – Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional features: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse: 50 mm/sec. Sensors can be deactivated for pressing custom parts. Gsdpfsuf Hx Hjx Afqjuc 1 set of machine feet (working height 500 mm). Location:

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Gusdpfx Afodfgg Ioqoc E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Gusdpfx Afsw Nafkeqec Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Godpfxevxgrrs Afqouc Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: rabljeno, Leto izdelave: 1991, Velikost plošče: 3600 x 1350 mm Skupni pritisk: 160 t Specifični pritisk: 3,5 - 5,0 kg/cm² Najv. delovni pritisk: 320 bar Hidravlični valji: 8 x 90 mm Odpiralna višina: 400 mm Teža cca: 8300 kg Gusdpfey Hrzmex Afqjc Mere: 4130 x 1520 x 2150 mm Preizkušeno v delovanju = nove zgornje plošče (zlato eloksirane) Kraj skladiščenja: Nattheim

Stanje: rabljeno, Leto izdelave: 2018, Color: White Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine No.: AA10000992 Working table dimensions: 5020 x 1380 mm (LxW) Table equipped with 2 vacuum zones Godpfx Afeycwupeqsuc Table equipped with 2 reference stops Including 8 reference pins and 8 supports XY vector speed: 35 m/min Axis movements Max. X-axis speed (per space): 25 m/min Max. X-axis speed (maximum): 90 m/min Max. Y-axis speed: 90 m/min Max. Z-axis speed: 30 m/min Control CNC controller: KVARA Control Windows Embedded Standard 7-64bit Hard disk capacity: 500GB, 7200rpm Microprocessor: Intel Pentium, 2.9GHz RAM: 8GB DDR4 XILOG MAESTRO software package Vacuum pump included Motor power: 5.5 kW Pump capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (LxWxH) Total weight: 7,500 kg - Year of manufacture: 2018 - Documentation available: No - CE marking: Yes - CE certificate: No - Serial number: AA10000992 - Number of router spindles: 2 - Router spindle 1: - Number of controlled axes: 3 - Min. spindle speed: 6,000 rpm - Max. spindle speed: 18,000 rpm - Main motor power: 15 kW - Router spindle 2: - Number of controlled axes: 3 - Min. spindle speed: 600 rpm - Max. spindle speed: 24,000 rpm - Main motor power: 12 kW - Type of router table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Main motor power: 5.5 kW - Capacity: 250 m³/h - CNC options: Waste conveyor - Table length: 5,020 mm - Table width: 1,380 mm - X-axis working area: 5,020 mm - Y-axis working area: 1,300 mm - Z-axis working area: 250 mm - X-axis max. stroke: 5,400 mm - Y-axis max. stroke: 1,650 mm - Z-axis max. stroke: 450 mm Financial Information VAT: The stated price is exclusive of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in available at any time for any items from the industrial sector Glenn Smeets

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Stroj za profiliranje parketa za vzdolžno stran 5+5 motorjev Gedpfjxwnhbox Afqjuc Hitrost do 60 m/min Minimalna delovna širina 70 mm (65 mm brez posnetja) Komplet diamantnih orodij za T&G profil + dovodni tračni transporter s stranskim vodilom Nameščen, viden v našem obratu v delujočem stanju