Stiskalnica Za Telo nakup rabljenega (82.872)

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Credpfx Aovvkl Dskrjc Skladišče: Nattheim

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Crjdpfxjw Nafks Akrsc Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Credpfoxgvwpjx Akrec Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Csdpfxevxgrre Akrjrc Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Gannomat Mod. 260 Case Clamp Crsderfbnbepfx Akrsc Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Space requirements: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being reconditioned; additional pictures will follow shortly.

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Crodpfx Akedx R Dmerjc Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) Cjdsdx R Dtepfx Akrerc • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 1998. Credpfxeh Iahgs Akrjc Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 2002. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Crjdpfx Aksh Iahcorec Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Credpfxelkbn Is Akrec Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: rabljeno, Leto izdelave: 1993, rabljeno, vrhunsko stanje Proizvajalec: Hess Csdpexuv N Usfx Akrerc Tip: Express Leto izdelave: 1993 Strojna št.: 100914/28 Število cilindrov na stiskalni element: 2 – hod 110 mm Število stiskalnih elementov vodoravno: 3 Število stiskalnih elementov navpično: 3 Delovna širina: 2500 mm Delovna višina: 1350 mm Globina stiskanja: 600 mm pnevmatsko Električna nastavitev višine Potrebni prostor pribl. 3600 x 800 x 2450 mm Teža pribl. 1200 kg Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije ali jamstva

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Cjdeb Eln Djpfx Akrorc Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Csdew Sgnkopfx Akrorc - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) Csdpfx Aoiidm Nokrerc - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 221/93, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 16A Pneumatic connection 6 bar Total machine length 4300 mm Total machine width 1300 mm Maximum pressing length 2650 mm Crsdpfxjk Tzwde Akrjc Pressing width 1000 mm Pressing height 1000 mm Pressing pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing

Stanje: rabljeno, številka stroja/vozila: 008256, Največja obdelovalna širina: 800 mm Največja obdelovalna dolžina: 2500 mm Največja obdelovalna višina: 1340 mm Crjdpfxjx A Hfvs Akrsc Največja pomična hitrost: 40 m/min

Stanje: rabljeno, številka stroja/vozila: 008254, Maksimalna obdelovalna širina: 700 mm Maksimalna obdelovalna dolžina: 2600 mm Maksimalna obdelovalna višina: 1300 mm Credpfox A Hfpox Akrec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena 12 m dolžine Vse brezhibno V delujočem stanju. Cjdpoxfg Sbofx Akrerc Nahaja se na sedežu podjetja.

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 0-306-04-2737, delovna širina: 800 mm, dolžina transportnega traku: 4.800 mm, hitrost pomika os X: 37 m/min, delovna višina: 1.400 mm, delovna dolžina: 2.300 mm, Nižja cena ni določena - zagotovljena prodaja najvišjemu ponudniku! Prevzem stroja mora biti opravljen med 10. 06. 26 in 30. 06. 26! TEHNIČNI PODATKI Maksimalna širina obdelovanca: 800 mm Maksimalna dolžina obdelovanca: 2.300 mm Maksimalna višina obdelovanca: 1.400 mm Maksimalna podajalna hitrost: 37 m/min PODROBNOSTI O STROJU Dolžina stroja: 4.800 mm OPREMA Dovajalni transportni trak Codpfxjy Uwmqj Akrorc Odvajalni transportni trak Stroj se prodaja in dobavi v dejanskem in pravnem stanju ("kot viden in všečen") na podlagi fotodokumentacije ter tehnično/komercialnih dokumentov opisnega značaja. Kupec ima pravico izdelek pred prevzemom pregledati in prevzema odgovornost za montažo, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8536

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 0-306-04-1262, delovna širina: 600 mm, dolžina transportnega traku: 3.000 mm, hitrost pomika os X: 40 m/min, delovna višina: 1.300 mm, delovna dolžina: 2.500 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Prevzem stroja mora biti opravljen med 10.06.26 in 30.06.26! TEHNIČNE PODROBNOSTI Maks. širina obdelovanca: 600 mm Maks. dolžina obdelovanca: 2.500 mm Maks. višina obdelovanca: 1.300 mm Min. širina obdelovanca: 120 mm Min. dolžina obdelovanca: 300 mm Min. višina obdelovanca: 300 mm Maks. dovodna hitrost: 40 m/min Dolžina transportnega traku: 3.000 mm PODROBNOSTI O STROJU Krmilni sistem: NC 16 OPREMA Credpfxjy Uv Iye Akrsc Izvozni transportni trak CE oznaka Stroj se prodaja in dostavlja v dejanskem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in tehničnih/komercialnih opisnih listin. Kupec ima pravico priskusiti blago pred prevzemom in je odgovoren za inštalacijo, varnost in uporabo stroja na namembnem kraju. Zunanja referenca: 8535

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, številka stroja/vozila: 11/10575, delovna širina: 3.000 mm, najv. debelina pločevine: 16 mm, TEHNIČNE PODROBNOSTI Širina pločevine: 3.000 mm Debelina pločevine: 16 mm Crjdpezapqwsfx Akrec Upravljanje: konvencionalno PODROBNOSTI O STROJU Nazivni tok: 63 A Napetost: 380 V

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, The general overhaul in 2024 includes, among other things, the roller head, hydraulic nut, bearings, main shaft, oil pump with filter, as well as synthetic oil. Only the steel housing is older but remains in excellent condition. The images of the production line in the hall were taken prior to the overhaul. The individual images of the Amandus-Kahl pellet press show its condition after refurbishment. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h MACHINE DETAILS Year of manufacture (motor): 2024 Year of manufacture (cooler with screener): 2015 Year of manufacture (conveyor belt): 2015 Year of manufacture (feed auger): 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electrical control cabinet with emergency stop Complete electrical documentation Conveyor belt Screening system with automatic cooling Hydraulic nut Roller head Electrical wiring Dosing screw for product infeed Automatic dosing system for filling 4 additional 6 mm dies 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter Cedpfx Akszaricsrsrc 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new pressure piece (main shaft) Documentation of overhauled and replaced parts

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz Cjdswyc H Tjpfx Akrorc - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Codpey Egkgjfx Akrjrc Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Hidravlična stiskalnica za furnir Ott, odlično stanje. 120 T. Površina stiskanja 2550 x 1350 mm. Stiskalnica za furnir z vodnim ogrevanjem. Preizkus delovanja možen kadarkoli. Crsdpfxsza Hxxj Akrsc