Stiskalnica za telo

Gannomat Concept Eco

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Fodpfsw Nafkjx Acdegf Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: novo, Leto izdelave: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with case-hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearing: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 deg/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Fgsdpfx Acon Nv H Sjdef Gantry drive: double-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved and precisely machined steel structure Table type: vacuum, hybrid, steel, aluminium with M16 or M18 holes #router #CNC #milling #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #pywood #particleboard #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Technical Specifications: Fsdpey Egz Sofx Acdogf Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg Fsdpob Eln Djfx Acdogf

Stanje: rabljeno, Dimenzije: D 6990 mm, Š 2500 mm, V 2720 mm. Teža 4191 kg. Preklopna naprava za zabojnike prostornine 140–660 l. Fodpjvkn Nvefx Acdegf

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) Fgjdpoiidm Nofx Acdof - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine! List price: €32,665 – Complete in standard configuration with: Sturdy, torsion-free steel frame in welded and bolted construction – TOP lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements – Lamella pressure beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints – Counterpressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support panels – Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam – Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir – Pressing is performed electromechanically by two separate worm gear motors (2 x 0.75 kW) – Pressing force of the pressure beams is infinitely adjustable via two potentiometers and regulated by frequency converters, making the pressure regulation absolutely wear-free – Pressing force for the horizontal beam: min. 500 daN (kg) up to max. 2200 daN (kg), stepless – Pressing force for the vertical beam: min. 300 daN (kg) up to max. 2200 daN (kg), stepless – Pressing and adjustment speed of the beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second – Simple operation via 6 separate push-buttons, 8 movement sequences selectable via control unit – Freely adjustable pressing time preselection with automatic opening (0–30 min, switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm | Height min: 150 mm, max: 1400 mm | Depth: 700 mm – Weight: approx. 1800 kg net – Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Fgsdpfjuf Hx Hjx Acdsf Additional features: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse: 50 mm/sec. Sensors can be deactivated for pressing custom parts. 1 set of machine feet (working height 500 mm). Location:

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 550 h, številka stroja/vozila: 99, 🚀 GEDA 500 Z – VERTICAL RACK AND PINION CONSTRUCTION HOIST Used, 2015 – fully serviced at GEDA Germany Warranty: 12 months 🏗️ RELIABLE GERMAN MACHINE – READY FOR OPERATION The GEDA 500 Z is a professional vertical material hoist, ideally suited for lifting heavy and bulky loads on construction sites. Thanks to its robust GEDA build quality and easy maintenance, this model has proven to be one of the most reliable hoists in the industry for years. The hoist has been serviced directly at GEDA Germany, fully refurbished, and comes with a 12-month warranty. Fsdpfx Aexvygaecdogf ⚙️ TECHNICAL SPECIFICATIONS Manufacturer: GEDA (Germany) Model: 500 Z Year of manufacture: 2016 Drive: 5.5 kW / 400 V / 50 Hz Lifting height (max): 100 m Load capacity: 500 kg Lifting speed: 30 m/min Platform dimensions: 1.4 × 1.6 m Mast system: GEDA UNI-X-MAST VISUAL CONDITION: EXCELLENT – MANY NEW PARTS TECHNICAL CONDITION: EXCELLENT – EACH HOIST IS SUPPLIED WITH A GEDA MANUFACTURER’S INSPECTION SHEET CERTIFYING FULL FUNCTIONALITY 🧰 ACCESSORIES FOR LIFTING HEIGHT UP TO 20 m Electric motor with basket Lifting cable for heights up to 50 m – 1 pc Steel mast 1.5 m with rack – 13 pcs Mast anchorage – 4 pcs Cable guide – 3 pcs Fully serviced, ready for use 💡 ADDITIONAL INFORMATION ✅ Hoists serviced and tested in Germany ✅ 12-month warranty from date of purchase ✅ GEDA certificate and manufacturer’s documentation ✅ Platform swivels 90° for easier loading and unloading ✅ Single-axle transport system available as an accessory ✅ Manuals available in Croatian, German, and English 🆕 WE ALSO OFFER NEW GEDA HOISTS AND COMPLETE EQUIPMENT In addition to used units, we offer new GEDA hoists and lifts of all types: Vertical and inclined construction hoists Material and personnel platforms Accessories and spare parts for all GEDA models All new and refurbished GEDA hoists come with full warranty, manufacturer’s certificate, and immediate delivery available. FIRST-HAND – OFFICIAL GEDA HOIST DEALER FOR CROATIA FOR OVER 30 YEARS. Specialised in sales, rental, servicing of GEDA lifts, hoists, and complete equipment.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: Fsdpfsvxgrrjx Acdegf • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm Fgedexwaz Hjpfx Acdef - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...