Stiskalnica za telo

Gannomat Concept 70 Eco

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Fodpow Nafkofx Abvofw Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: dober (rabljeno), Koda: 0024 Znamka: ITALPRESSE Model: NUOVO/SP Hitronastavljiva polavtomatska stiskalnica za okvirje Tehnični podatki Ročno nalaganje Maksimalne uporabne dimenzije: 2500 x 600 x 1250 mm Minimalne uporabne dimenzije: 250 x 600 x 280 mm Motorno vodoravno prečno vodilo z zaslonom Nastavitev vertikalnega nosilca Število vertikalnih cilindrov: 6 Število horizontalnih cilindrov: 6 Hod cilindrov: 70 mm Ffodpfx Abovv Ul Uovew Hod prečnega nosilca: 920 mm Vgrajena moč: 0,55 kW Skupne dimenzije: 3600 x 800 x 2550 mm (VxŠxG) Teža: 1400 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Fjdpfjb Eln Dox Abvsfw Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Fedpfxjiidm Ns Abvofw Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine! List price: €32,665 – Complete in standard configuration with: Sturdy, torsion-free steel frame in welded and bolted construction – TOP lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements – Lamella pressure beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints – Counterpressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support panels – Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam – Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir – Pressing is performed electromechanically by two separate worm gear motors (2 x 0.75 kW) – Pressing force of the pressure beams is infinitely adjustable via two potentiometers and regulated by frequency converters, making the pressure regulation absolutely wear-free – Pressing force for the horizontal beam: min. 500 daN (kg) up to max. 2200 daN (kg), stepless – Pressing force for the vertical beam: min. 300 daN (kg) up to max. 2200 daN (kg), stepless – Pressing and adjustment speed of the beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second – Simple operation via 6 separate push-buttons, 8 movement sequences selectable via control unit – Freely adjustable pressing time preselection with automatic opening (0–30 min, switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm | Height min: 150 mm, max: 1400 mm | Depth: 700 mm – Weight: approx. 1800 kg net – Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional features: Fjdpfjuf Hx Hjx Abvjfw Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Pressing speeds: 5 / 10 / 25 mm/sec and rapid traverse: 50 mm/sec. Sensors can be deactivated for pressing custom parts. 1 set of machine feet (working height 500 mm). Location: