Stroji za lepljenje robnih trakov nakup rabljenega (575)

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Equipment: Machine table with 13 guide rollers for improved workpiece handling Edge feed, synchronized with the belt feed Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cuttable edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; feed rate approx. 6.0 m/min; 50 mm wide toothed belt with thick, gentle rubber coating for workpiece protection. Digital counter for height adjustment Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime Flush trimming unit for front and rear workpiece edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, extendable workpiece support rail approx. 300 mm Njdpoytkiusfx Advowd Rotatable foil turntable Ø 800 mm Technical details: Minimum workpiece width approx. 80 mm Workpiece thickness 10 – 50 mm Minimum workpiece length approx. 220 mm Edge thickness 0.4 – 2.0 mm Roll separation max. 1.0 x 55 mm, 2 x 45 mm Glue pot heating capacity 2.7 kW Electrical connection 400V, 50 Hz, 3Ph + N Total connection load 3.8 kW Heat-up time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm, excluding foil turntable Ø 800 mm Net weight approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Robilnik BRANDT optimat kdn340 Nanos lepila z valjčkom Rezervoar ima funkcijo menjave (stroj je opremljen z enim rezervoarjem) Pnevmatska predgiljotina Pritiskalni valji Žagice za končno rezanje Rezkalna enota zgoraj-spodaj R1-R2 Profilna strgala Polirni stroj Najv. višina obdelovanca: 45 mm Najv. debelina robnega traku v kolutu: 3 mm Nodpfjywwqzjx Advowd Pomik: 10 m/min Dolžina stroja: 310 cm Stroj dobro vzdrževan, v zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Njdpfx Aowz Ic Aedvswd Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Nwedeunrwnjpfx Advsd Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), širina obdelovanca (maks.): 70 mm, skupna masa: 800 kg, delovna višina: 870 mm, Technical data: Maximum edge thickness: 5 mm / 8 mm Maximum workpiece height: approx. 40 mm / 50 mm Minimum workpiece height: approx. 250 mm / 300 mm Minimum workpiece width: approx. 70 mm Feed rate: approx. 11 m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11 kW Electrical connection: 230/400V / 50/60 Hz Working table height: 870 mm Nedpfxsug Uqae Advswd Dimensions (LxWxH): 4100 x 1400 x 1300 mm Condition and further details as per images.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 10.150 h, Proizvajalec: BRANDT Model: Ambition 1600 GC Enota za utore Oprema: Predrezalna enota – DIA glave Nodpfx Aoywzc Ijdvewd Največja debelina robnega traku: 12 mm Hitrost podajanja: 18 m/min Pnevmatska enota Največja višina robnega traku: 66 mm Posoda za lepilo v granulatu Žaga za obrezovanje, 2 motorja, ravno ali poševno Enota za zaobljanje koncev, 2 motorja Profilni strgalo Ravno strgalo Polirni stroj Dimenzije: Dolžina: 6600 mm Širina z brusilnim kolutom: 1400 mm Višina: 1800 mm Teža: pribl. 2900 kg

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Nsdpfov Sv Enox Advowd Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: rabljeno, številka stroja/vozila: 007113, Vrsta nameščenega roba: tanek rob, močan rob, masiven les Sistem lepljenja: EVA Fugiranje s frezo: da Nsdpfx Aderl Ur Tjvewd Večnamenska enota: da Maks. podajalna hitrost: 22 m/min Največja debelina plošče: 60 mm Delovni agregati: 8 kos.

Stanje: rabljeno, številka stroja/vozila: 008160, Tip nameščenega roba: tanka roba, debela roba Lepilni sistem: EVA Spojno rezkanje: da Multifunkcijska enota: da Največja hitrost podajanja: 14 m/min Maksimalna debelina plošče: 60 mm Njdpfxexqm Iys Advjwd Delovne enote: 7 kos

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Nsdpfx Adeyqybuovjwd Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 0-261-20-3177, Funkcionalnost: popolnoma funkcionalen, Debelina plošče 8 - 50 mm Min. dolžina obdelovanca 150 mm Min. širina obdelovanca 70 mm Podajanje 11 m/min Izvlečna podpora obdelovanca ESC elektronski nadzor Masiva/PVC – rob 0,4 - 3 mm Letvaste in kolutne zaloge Rezilo za prekinjanje traku Pred-rezalni rezkalnik 2 x 2,2 kW 12000 1/min Vhodno vodilo ročno nastavljivo s števcem SIKU Lepilna kad spodaj. Lepilni valj preklopljiv za smer/smer proti Nwjdpfxeyw Rbgs Adved Lepilna postaja 2025 servisno prenovljena in očiščena Pritisni sistem: 1 pogonski pritiskalni valj, 1 naknadni pritiskalni valj Odsesovalna enota z 2 motorjema vrtljiva 0 - 12°, 2 x 0,18 kW 12000 1/min Gladilni/posnemalni/zaobljeni rezkalnik 2 x 0,27 kW 12000 1/min Radialni rezkalni nož pneumatsko krmiljen Ploskovni rezkalni nož pneumatsko krmiljen Zbiralnik za odrezke Teža ca. 1000 kg Skupna dolžina 3570 mm Električni priključek ca. 9,5 kW

Stanje: rabljeno, številka stroja/vozila: 006603, Tip nameščene robne letve: tanka letev, debela letev, masivni les Lepljenje: EVA Spojno rezkanje: da Multifunkcijska enota: da Največja podajalna hitrost: 14 m/min Največja debelina plošče: 60 mm Delovni agregati: 8 kos Nwsdoyngz Aopfx Adved

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DETAILED PHOTOS AND VIDEO AVAILABLE ON DISK, PLEASE CONTACT ME VIA SMS AND I WILL SEND THEM PLEASE DO NOT WRITE ON OLX, ONLY CALL OR EMAIL TECHNICAL DATA: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: used, in very good condition Edge thickness: 0.4-3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge width: 60 mm Maximum power consumption: 21kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Power supply: [230V/400V] EQUIPMENT: electronically controlled infeed fence relatively rare automatic edge feeder pre-milling unit glue application unit pressure unit end cutting unit for straight or angled cuts trimming unit for excess edging corner rounding unit profile scraper Njdpsxuu N Hjfx Advewd flat scraper polishing unit 3 spray stations for anti-adhesive fluids TECHNICAL CONDITION: Machine fully operational, in continuous use Regularly serviced by authorized service Ready for operation Low working hours LOCATION: Bochnia TRANSPORT: self-collection

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Nwodpfewlbxljx Adved Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Automatic edgebander for pre-glued edges Nedpswfw A Hsfx Advewd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj HOMAG KAL 310/7/A3 je bil izdelan leta 2010. Gre za rabljen enostranski robni lepilni stroj z 28-pozicijskim ISAS magazinom robnih trakov, PU lepilno enoto in povratnim sistemom Boomerang. Vključuje spojno rezkalno enoto z dvema motorjema ter PU 34 lepilni sistem s kapaciteto do 6 kg/h. Idealen je za natančno lepljenje robov. Za več informacij o tej napravi nas kontaktirajte. Vrste uporabe Nwodpfxjx D Ra Te Adved Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Obdelovalni stroj za lepljenje robov Felder FORMAT 4 Tempora60.06LX je bil izdelan leta 2019. Opremljen je s krmilnim sistemom x-motion PLUS, verižnim podajalnikom s hitrostjo 10 m/min in lepilno enoto s teflonskim premazom za granulata EVA ali PUR. Stroj podpira debeline robnih trakov od 0,4 do 3 mm in vključuje večnamensko rezkalno enoto. Razmislite o možnosti nakupa tega stroja za lepljenje robov Felder FORMAT 4 Tempora60.06LX. Za več informacij o tej napravi nas kontaktirajte. Nwedpfx Adex D D R Sovjd Vrste aplikacij Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, Ta robna lepilka VITAP GIOTTO, proizvedena leta 2025, je zasnovana za lepljenje robov na ravnih, oblikovanih, konkavnih in konveksnih ploščah. Opremljena je s polavtomatsko konturno robno lepilko s teflonsko prevlečenim lepilnim loncem, nastavljivim nanosom lepila in avtomatsko napravo za rezanje traku. Idealna za obdelavo večjih obdelovancev zaradi ojačanega vrtljivega nosilca in vgrajenega vakuuma. Razmislite o nakupu te robne lepilke VITAP GIOTTO. Kontaktirajte nas za več informacij o tem stroju. Nwjdpfx Aox E Ecbjdved Vrste uporabe Lepljenje robov

Stanje: rabljeno, Holz Her Accura 1556 Premium popolnoma opremljen, sodoben robni lepilni stroj Prva dostava 2021 Stroj je v ODLIČNEM STANJU Na zalogi v Liebochu Nodpfoyfndajx Advewd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Edgebander from 2005. This OTT Twister features a hot-melt/cold glue application system and is capable of processing edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses from 8 to 60 mm and offers a feed rate of 14-20 m/min. If you are looking for a high-quality edgebander, you should consider the OTT Twister edgebander we are offering for sale. Contact us for further details. • Glue application: hot-melt/cold glue process; application roller with both synchronous and counter-rotation • Edge thickness: 0.3-10 mm • Workpiece thickness: 8-60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed drive power: 3.0 kW • Feed speed: 14-20 m/min Nodpfx Aeyn I U Rodvowd • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air velocity (minimum): 20 m/s • Compressed air consumption: approx. 300 l/min Processing units / equipment on the machine: • Jointing: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combination hot-melt glue unit: • Removable and interchangeable storage container for EVA, PUR hot-melt adhesive, or cleaning granulate; container volume 2.5 l • AKM (Automatic Edge Magazine): • Automatic edge magazine with optical monitoring for pre-cut edge band strips • End trimming: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush trimming: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided tracing; 2 carbide-tipped reversible knives HF70, Ø70 x 20 x 16, z=4 • Fine trimming (chamfer 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided tracing; 2 carbide reversible knife cutterheads HF70, Ø70 x 20 x 16, z=4 • AWSR (Radius R2–R5): • 2 quick-change sets for finishing cutters, 2 x 0.3 kW; 2 carbide reversible knife cutterheads AR73 x 16 x 16, z=3, R2–R5 • AKF (Copy milling): • Automatic copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment unit • PU kit: • 5-way spray unit (2 x separating agent, 1 x lubricant, 2 x cleaning agent), fine buffing unit with fabric disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna višina: 1.445 mm, največja dolžina izdelka: 2.740 mm, Cette CASADEI Bordatrice E350PM a été fabriquée en 2022. Elle dispose d’une plage de hauteur de panneaux de 10 à 45 mm et prend en charge des chants d’une épaisseur de 0,4 à 2 mm. La machine fonctionne à une vitesse d’avance de 7 m/min et offre une puissance de chauffe du bac à colle de 1 490 W. Profitez de cette opportunité pour acquérir la plaqueuse de chants CASADEI Bordatrice E350PM. Contactez-nous pour plus d’informations. • Hauteur de panneau : 10-45 mm • Vitesse de bande d’avance : 7 m/min • Épaisseur du chant : 0,4-2 mm • Largeur minimale du panneau : 210 mm Nwsdpsx D Icfsfx Advjd • Longueur minimale du panneau : 600 mm • Distance minimale entre panneaux : 95 mm • Ouverture de support de panneau extensible : 310 mm • Pression de service pneumatique : 0,65 MPa (6,5 bar) • Consommation d’air moyenne : 320 Nl/cycle • Puissance de chauffe du bac à colle : 1 490 W • Dimensions globales de la machine (mode opératoire) : 2 740 x 1 445 x 945 mm (L x H x P) • Vitesse de l’air d’aspiration : 30 m/s • Débit d’air d’aspiration : 950 m³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine. Additional information: • Motor power: 2 x 4.5 kW, 150 Hz • Motor speed: 9,000 rpm • Power supply: 230 V • Heating capacity: 6 x 500 watts • Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm • Stroke: max. 8 mm • Roll diameter: max. 850 mm • Edge height: 14 - 65 mm • Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness • Workpiece length: min. 130 mm Nwjdpsx D Nh Aefx Adved • Workpiece gap: min. 300 mm • Workpiece distance: min. 990 mm • Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm • Single tracing workpiece overhang: min. 30 mm • Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm • Cutterhead diameter: 125 mm • Motor shaft: 30 x 68 mm diameter • Internal thread: M16, depending on motor, left or right • Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm² • Tool diameter: 160 mm / 48 teeth • Swivel range: 0 and 25 degrees • Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges • Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Stroj za lepljenje robov SCM Olimpic K560 je bil izdelan leta 2019. Opremljen je z 7" zaslonom na dotik z elektronskim upravljanjem Touch 7, podpira debeline robnih trakov od 0,4 do 3 mm in obdela plošče debeline od 8 do 60 mm. Stroj omogoča podajalno hitrost 12–14 m/min in ima sistem za lepljenje robov s toplim zrakom. Za dodatne informacije nas kontaktirajte. • Stanje stroja: dobro ohranjeno • 7" zaslon na dotik (16:9) z elektronskim upravljanjem Touch 7 • Debelina robnega traku: 0,4 – 3 mm • Debelina plošče: 8 – 60 mm • Minimalna dolžina plošče: 140 mm Nwsdpfoyabq Ajx Advsd • Minimalna širina plošče: 100 mm • Podajalna hitrost: 12 – 14 m/min • Sistem za lepljenje robov s toplim zrakom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, širina obdelovanca (maks.): 40 mm, skupna višina: 950 mm, največja dolžina izdelka: 3.672 mm, This BRANDT edgebander Ambition 1110 KDF 110 was manufactured in 2016. It is a single-sided edgebanding machine designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses from 8 to 40 mm. Please check the availability of this BRANDT edgebanding machine Ambition 1110 KDF 110. Contact us for further details. • Machine type: Single-sided edgebanding machine for straight workpiece edges • Feed speed: 8 m/min • Working height: 950 mm Nwodpsyir S Njfx Adved • Workpiece and edge parameters • Workpiece thickness: 8-40 mm • Workpiece width: min 70 mm (thickness 8-22 mm) or 120 mm (thickness 23-40 mm) • Edge material (coil): 0.4-3 mm • Edge material (strips): 0.4-3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one infeed, one outfeed), equipped with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge overhang trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable between flush, radius, and chamfer trimming • Profile scraper: For rounding or chamfering pre-milled PVC edges (max. 3 mm) • Glue joint scraper: Removes glue residue in the glue joint area • Control and electrics • Controller: EASY CONTROL EC 10+ with 7" wide-format touchscreen • Program storage: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual setting of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for the transport chain (standard) • Safety: CE-compliant; dust tested (TRK max. 2 mg/m³) Technical Specification Feed Speed 8 m/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. • Stanje: rabljeno Dodatna oprema Nwedsyhqi Djpfx Advod • BARBARIC povratni sistem za obdelovance