Stroj za robne trakove

Holz-Her Sprint 1317-1

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic Fsdpfx Ajx It Hmofleft End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Ffsdpfx Ajxymd Tsflet Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: rabljeno, Leto izdelave: 2010, Gebrauchtý stroj Rok výroby: 2010 s jednotkou pro srovnávání a zaoblování rohů Ovládací panel s LCD displejem a klávesnicí Srovnávací jednotka se 2 protiběžnými diamantovými frézami s přívodem hrany pro páskový a proužkový materiál Fsdjw I H Rkopfx Aflsft s lepicím válcem a lepicí jednotkou s předem zastřihováním z role s přítlačnou sekcí s kapovací jednotkou s tažným kapem s jednotkou na zarovnání a frézování rádiusů Jednotka na zaoblování rohů pro čelní hrany manuální nastavení jednotek Tloušťka hrany: 0,4–5 mm Výška obrobku: 8–60 mm Minimální šířka obrobku: 70 mm Minimální délka obrobku: 140 mm Rychlost posuvu: 11 m/min s rádiusovým stíracím agregátem s plošným stíračem s leštící jednotkou výsuvná podpěra obrobku Odsávací přípojka: 120 + 2 x 80 mm Hmotnost: cca 990 kg D x Š x V: 4550 x 1550 x 1100 mm Dostupnost: krátkodobě Sklad: Flörsheim

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Μηχανή συγκόλλησης άκρων Hebrock F5 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επίστρωση και χωρίς συντήρηση, με προκαταρτική ρύθμιση για γρήγορη αλλαγή δοχείου θέρμανσης. - Οθόνη αφής 10" - Μέγιστο πάχος ταινίας/άκρου: 3mm - Ελάχιστο μήκος τεμαχίου: 160mm - Ταχύτητα τροφοδοσίας: 7m/min - Έτοιμη προς λειτουργία σε περίπου 3,5 λεπτά Ffedpowyu Rwefx Aflst - Μέγιστη κατανάλωση ισχύος: 7,4kW - Ηλεκτρική σύνδεση: 400V/3ph/50Hz - Ύψος τραπεζιού: 900mm - Διαστάσεις μηχανήματος: 4300x1300x1400 mm - Βάρος περίπου: 900Kg Επιπλέον εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Συνδυαστική κεφαλή κοπής • Ακτίνα για γωνιακό στρογγύλισμα R = 2mm • Στρογγύλισμα γωνιών R = 2mm • Συσκευή ταχείας αλλαγής για τον κινητήρα στρογγυλοποιητή γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμής • Υποδοχές για τη φρεζαριστική μονάδα και τη ξύστρα προφίλ ακτίνας • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λωρίδα) • Εσωτερικός LED φωτισμός

Stanje: rabljeno, številka stroja/vozila: 008131, Maks. širina panela: 4400 mm Maks. dolžina panela: 4400 mm Maks. izhod glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 7 Fjdpow Idh Hefx Afljft

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, Avtomatski brusilni stroj za tračne žage – ISELI BAP110 ISELI BAP110 je najsodobnejši, popolnoma avtomatski brusilni stroj za liste tračnih žag, razvit za najvišje zahteve glede natančnosti, učinkovitosti in udobja pri upravljanju. Zaradi avtomatiziranega postopka brušenja BAP110 zagotavlja enakomerno in kakovostno obdelavo žaginih zob – z minimalno potrebo po osebju. 🔹 Popolnoma avtomatsko delovanje 🔹 Natančno nastavljiva oblika in razmak zob 🔹 Prilagodljiva uporaba za različne liste tračnih žag Fsdjv Tltdepfx Afloft 🔹 Intuitivno upravljanje z uporabniku prijaznim vmesnikom Stroj je še posebej primeren za žage in brusilnice, ki cenijo stalno visoko kakovost reza in optimizirane pretočne čase.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.300 mm, dolžina pomika po osi Y: 4.300 mm, dolžina rezanja (maks.): 4.300 mm, višina reza z zareznim rezilom (max.): 4.300 mm, premer žaginega lista: 380 mm, HPP 380/43/43, popolnoma avtomatsko nalaganje s TBP 200/31/22/ Glavni motor 18,5 kW Stroj deluje odlično, možen preizkus delovanja Holzma Profi HPP 380 Fsdpexvz T Isfx Afleft Dolžina reza: 4.300 mm Širina reza (programsko voden pomik potiskača): 4.250 mm Miza z zračno blazino: 2.160 x 650 mm, 3 kos + 1* 2.810 mm dolžine Centralni puhalnik: 1 enota z izboljšano zmogljivostjo puhanja 2 dodatni napravi za poravnavanje Tehnični podatki: Izvlek žaginega lista: 95 mm Podajanje vozička žage: naprej 1–130 m/min, nazaj stalno 130 m/min Glavni motor žage: 18 kW Predrezovalni motor: 2,2 kW, VVSH agregat, programsko voden, vertikalno dvižen Obratovalna napetost: 400 V (+10%/-5%) / 50 Hz Električna priključna moč za glavni motor žage 18 kW: 24 kW Krmiljenje Power Control CADmatic 4.0 s 17-palčnim ravnim zaslonom Označevanje z grafiko kosov / program etikete / tiskalnik etiket PICA 104

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last maintenance by Homag in 11/2024) Equipment and technical data: Workpiece thickness min.: 12 mm Workpiece thickness max.: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (tank / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-regulated Ffsdpfxjwx Aaqo Aflet Heating-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manually switchable) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: trimming unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile trimming unit FK13, automatic 8-position tool changer (R = 2 mm) Bevel / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Polishing: buffing unit in the finish unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction per aggregate) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU directive 98/37/EC Dimensions / space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Stanje: rabljeno, BRANDT highflex 1440 edge bander Well equipped, Pre-milling units Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom milling unit 2 x corner rounding units Profile scraper Flat scraper Polishing unit Fsdpfx Asv H D S Sefloft The machine features NC-controlled milling units and a pneumatic package Maximum workpiece height: 60 mm Maximum edge thickness (in rolls): 3 mm Feed speed max: 14 m/min The machine is fully operational and can be inspected prior to purchase.

Stanje: rabljeno, Leto izdelave: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Processing dimensions: - Workpiece thickness: 8–60 mm - Workpiece width: from 70 mm - Edge height: up to 8 mm - Edge thickness (coil material): up to 3 mm Feed: - Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology: - Glue system for granulate - Glue pot positioned above the feed - Interchangeable pot HOMAG QA 65 N - Designed for EVA and PUR processing - Quick-change function Units: - Jointing milling unit - Preheating zone - NC-controlled pressure station - Front and rear end trimming with two motors - Unit for flush, radius, and bevel processing - Corner copying unit with two motors - Scraper blades: profile and flat scraper - Buffing unit Additional and operating equipment: - Integrated spraying device - Air cushion table for workpiece support - PU pressure rollers - Mechanical infeed stop - HOMAG powerTouch control interface - Right-hand version machine - CE compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Ffsdpfx Aexz H U Uoflot Availability: short-term Location: North Rhine-Westphalia