Obrobnica robov Holz-Her Auriga 1308 XL

Holz-Her Auriga 1308 XL

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Control system with 15" touchscreen - Jointing milling unit with 2 milling heads - Edge feed - Glue application system GluJet 301: 2.3 kW, automatic glue height adjustment, tracing nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond milling cutters left & right: with CM technology - Corner copying unit with diamond cutters - Surface scraper blade - Buffing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multi-function milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spraying device for infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm Ksdpfoy U R Izex Abxolu - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 008394, Najv. širina plošče: 3800 mm Najv. dolžina plošče: 3800 mm Ksdpfoygtbtex Abxjlu Najv. izstop glavnega žaginega lista: 55 mm Število vpenjal: 4

Stanje: zelo dobro (rabljeno), Edge banding machine HOLZ-HER Auriga 1308 XL -used- PC control with display, touchscreen, swiveling control panel, program memory, automatic pressure bridge adjustment, feed via transport chain, extendable workpiece support, diamond jointers for both climb and counter-rotation, strip magazine, standby function, Kledpjy T D N Aofx Abxsu cartridge system Glu Jet, cartridge system with sensing nozzle, capable of using PUR adhesives, pressure unit with powered roller, pneumatic control of pressure unit, cross-cut saw with 2 HF motors, cross-cut saw with pneumatic swiveling, flush/radius milling unit, motorized positioning control of the milling unit, diamond-coated milling tools, blow nozzle at the milling unit, corner copying unit with diamond-coated cutter, radius scraping blade with motorized positioning, blow nozzle on the radius scraper, technology-driven surface scraper, blow nozzle at the surface scraper, spray unit for release agent, spray unit for cleaning agent, buffing unit. ----- Technical Data ----- Edge thickness (roll material): 3 mm, Edge thickness (strip material): 5 mm, Workpiece thickness: max. 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Workpiece support clearance: 480 mm, Turntable diameter for edge material: 800 mm, Trim blade for roll material up to: 3 mm, Heat-up time: 3.5 min, Power, jointing cutter: 0.8/1.2 kW, Power, cross-cut saw: 2x0.45 kW, Power, milling station: 2x0.65 kW, Power, corner copying: 0.3 kW, Power, buffing unit: 2x0.09 kW, Extraction port Ø jointing cutter: 2x80 mm, Extraction port Ø cross-cut saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality info: - all settings checked - set according to manufacturer specifications - new heater - cartridge system leak tested - complete basic inspection - complete basic cleaning - electrics checked - pneumatics checked - immediately ready for use

Stanje: novo, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration model- New: GLUJET GJ725 This offer includes a comprehensive equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Adhesive application system Glu Jet GJ725 NC PUR PRO - Pneumatic pressure unit 1912-3 - Pneumatic end trimming unit 1918, 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner copying unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spraying unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and glue quantity control - Long infeed fence 1,252 mm - Motorized adjustment of infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for 1918 end trimming unit - Shelf program - Flat scraper FK701 Kljdpfx Abju R Sy Aoxsu - Spraying unit GM301 after pressure unit - new demonstration machine -

Stanje: rabljeno, Leto izdelave: 2014, Za povpraševanja: Zoltán Utasi +36 30 205 7380 • motorni pritrdilni most za nastavitev pritiska • Električni sistem za brezstopenjsko podajanje 400 V / 50 Hz, 2,2 kW • "Krmiljenje PPC 221 – z 8,4'' VGA barvnim zaslonom" Visoko zmogljivo krmiljenje z zelo enostavnim upravljanjem • Predrezalna enota za robove 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 min⁻¹) s 2 rezkalnima agregatoma za predrezanje plošče na robu • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, leva rotacija Za predrezalno enoto 1801 / 1802 • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, desna rotacija Za predrezalno enoto 1801 / 1802 • Polnilna enota za robni trak 1903 SYNCHRO avtomatski transport kolutov in materiala v trakih • Enota za nanos lepila Glu Jet GJ301 avtomatska (2,3 kW, 50 Hz) Klsdpfsx Huhcsx Abxju • Pripravna enota za lepljenje 1913 pnevmatska prvi valj poganjan, 2 dodatna pritisna valja z individualnim pnevmatskim upravljanjem • Odrezna enota 1918 (60 mm) pnevmatska (2 x 0,45 kW, 12.000 min⁻¹), pnevmatsko vrtljiva 0/10° • Multifunkcijska rezkalna enota 1827 pnevmatska (2 x 0,65 kW, 200 Hz, 12.000 min⁻¹) • Vertikalni sledilni valji ročno ročna nastavitev vertikalnega sledilnega valja po 0,1 mm za rezkanje previsa roba, npr. za plastične robove • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, leva rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Kotna kopirna enota 1832 (1 x 0,35 kW, 200 Hz, 12.000 min⁻¹), za debelino roba do 3 mm • Rezkar, diamantni Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijo (LEUCO sistem) in integriranim odsesavanjem ostružkov za profilirno enoto 1832 • Strgalo 1929 pnevmatsko vključno s pnevmatsko nastavitvijo (ločen za zgoraj in spodaj) • HW obojestranska rezila za nosilec strgala 1929 / 1927 R = 2,0 mm (potrebni 2 kosa) • Ravno strgalo 1964 Odstranjevanje ostankov lepila za čist lepljen spoj. • Polirna enota 1940 (2 x 0,12 kW, 50 Hz, 1400 min⁻¹) Za končno čiščenje in poliranje robov. Z 2 tekstilnima diskoma, vrtljiva od 0–5°

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Klodjy Nuf Tspfx Abxju Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: rabljeno, Holz Her Auriga 1308 XL compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC color touchscreen monitor iTronic adaptive pressure and glue volume control and cleaning routine Pre-milling unit for jointing prior to gluing section Fully automatic edge magazine for coil and strip material GLU JET cartridge glue application station + PUR bonding, with sensor-controlled nozzle Workpiece height 8–60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the trimming saws from 0–10° inclination 1827 MOT4 multifunction milling unit: flush trimming up to 8 mm, radius trimming – bevel trimming at 15° via NC axes Contour milling unit – corner rounding up to 3 mm edge thickness, working height 12–60 mm, postforming possible Kledpfx Absy Icmpoxou 1929 MOT4 scraper unit for bevels and radii with 2 scraper holders via NC axes FK701 flat scraper unit with pre- and post-sensing – finish Buffing unit – polishing Spray equipment at infeed and outfeed Spray equipment with lubricant for high-gloss edges Complete DIA tooling included First delivered in 2020 Machine in TOP CONDITION from lease return – small business Available from stock Lieboch

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Features and technical data: - Round pot glue unit - with second glue unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: two motorized saw units for front/end cap trimming - Top/bottom milling: two milling units with copying wheels for radius or chamfer work - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: two buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Replacement of the feed frequency inverter by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz Kljdpfx Aboyqanbexsu - Nominal power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² power cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short term Location: Röllbach

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Kjdpfjy Ehrxox Abxelu Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: novo, Pre-scoring unit, kW Dimensions (Length/Width/Height), mm Approx. machine weight, kg Masterwood MasterSaw Heavy-duty pressure beam saw with full equipment ----- Manufacturer description: ----- The MasterSaw pressure beam saws offer the following features: - Air-jet marked cutting line - Height-controlled pressure beam - Adjustable saw blade protrusion - 3 or 4 air cushion tables, center tables adjustable - Infeed and outfeed rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for saw blade replacement - Saw carriage return travel speed 110 m/min, feed up to max. 95 m/min - Gripper carriage return speed up to 95 m/min - Machine weight 6 t or 6.8 t - 8 or 10 twin-finger clamps as standard - Double roller side alignment - Intuitive machine software with graphical user interface - Tension-free cutting - Recut/nesting option - Front and rear cleaning flaps ----- Features of the MasterSaw series: MasterSaw 320 – Outstanding in price and performance ----- - Cutting length 3,200 mm - 3 air cushion tables, center table adjustable - Machine weight 6 t MasterSaw 430 – Industrial standard for the trade ----- - Cutting length 4,300 mm - 4 air cushion tables, center tables adjustable - Machine weight 6.8 t Detailed features MasterSaw 320/430: ----- - Saw unit with automatic adjustment of optimum saw blade protrusion - Scoring saw unit with 200 mm saw blade for splinter-free cuts at high feed rates - Saw unit drive via servomotor and rack and pinion - Pneumatic pressure beam is always positioned parallel to the worktable via rack and pinion - The opening height of the pressure beam is monitored by the intelligent control system to ensure the shortest cutting cycles - Double roller side aligner positions workpieces before and after the cutting line - Material pusher with 8 (MS 320) or 10 (MS 430) twin-finger clamps Technical specifications MasterSaw 320/430: ----- - Max. panel size MS 320: 3,200 x 3,100 mm - Max. panel size MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thickness up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode – up to 110 m/min in return Ksdjxmk Ebepfx Abxolu - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE protective equipment ----- Features of the MasterSaw series: MasterSaw 430 L – Lift table machine with 120 mm cutting height ----- The solution for high productivity The MasterSaw 430 L is equipped with rear-side lift table loading. Thanks to its 120 mm cutting height, it is also ideal for series production. Equipment and technical data MasterSa...