Ploščadna žaga - podajanje od spredaj

HOLZMA HPP 230/38/38 OPTIMAT

Stanje: rabljeno, Leto izdelave: 2024, STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vrst lukenj. - Vpenjalne roke za nosilec vpenjala, zasnovane za pozicijo vrst lukenj do največ 300 mm. - Idealen tristopenjski sistem orodij. - 1 komplet svedrov za vrtanje lukenj za moznike: - 5 karbidnih svedrov za moznike, Ø 8x77 mm, desno - 4 karbidnih svedrov za moznike, Ø 8x77 mm, levo. Osnovni stroj: STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. Gedpfxoxnlflo Adkobr - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. - Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Gsdpodqzcxjfx Adkjbr Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Maximum length: 2500 mm Gedew A A E Iepfx Adkobr

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, * Wemhöner Basic 1000 Plus - Année de construction 2008 - Très bon état, peu utilisé * Type KT-MB-28/15-240 * avec système de broches automatique et tourneuse en ligne * 2 tables avec système auto-vario broche * avec revêtement Téflon pour film pré-encollé * Système de pose de film pour table à broches (film pré-encollé) * Dimension de la plaque chauffante : 2800 x 1500 mm * Taille maxi pièce : 2 540 x 1 250 mm * Membrane : oui * Station de coupe * Magasin carrousel pour film, hauteur 3,2 m, avec 14 barres de suspension * Commande PLC Siemens S7 * Unité de commande pour l’automate : SIEMENS TP 270 (écran tactile) Gjdpfx Adoxbcudekjbr * Tensionnement automatique de la membrane * Puissance installée : 38,5 kW * Pression max. chambre : 6 bar * Ouverture max. presse : 150 mm * 6 cylindres, Ø 125 mm * Tension d'alimentation : 400V 50/60Hz * Hauteur chambre de presse : 40 / 60 mm * Pression maxi presse : 2400 kN * Pression de service du système hydraulique : 320 bar

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Infeed system for small panels Godpfx Ast Hal Dedkebr Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Glue scraper unit Oscillating brush unit Hot air dryer unit

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.020 mm, gradbena višina: 410 mm, dvižna višina: 600 mm, lastna masa: 150 kg, nosilnost: 350 kg, skupna dolžina: 1.900 mm, skupna širina: 740 mm, trajanje garancije: 24 meseci, NIVEAU - Scissor Lift Table HS 350 Gross without worktop Description: Godpeh A Hxisfx Adkobr - Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for mounting various worktops; equipped with 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operated via foot pump Load capacity in kg: 350 Weight in kg: 150 Useful lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Stanje: zelo dobro (rabljeno), We have a BECK HV600 shrink tunnel available here. Godpfehcdhlsx Adkebr It has been completely overhauled with new rollers and everything. Operates like new!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Brandt KDF 1440 Edition Only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) SUMMARY OF UNIT CONFIGURATION: JOINTING CUTTER UNIT 2 x 2.2 kW 200 Hz GLUING UNIT QA 65 N END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 OPPOSING CUTTERS PNEUMATIC 2-POINT ADJUSTMENT CONTOUR MILLING UNIT 1 x 0.35 kW WD 60; also suitable for subfloor panels PNEUM. 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Upper pressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spraying unit for workpieces Automatic edge feed Multiple roller sensing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22mm: 70 mm* – For workpiece thickness 23-40mm: 120 mm* – For workpiece thickness 41-60mm: 150 mm* *Depending on workpiece length – Workpiece projection: 38 mm – Workpiece thickness: 8 – 60 mm – Edge height max. = workpiece height + 6 mm Gsdpfezb Iggex Adkjbr – Edge material, coil: 0.4 – 3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material, strips: 0.4 – 8 mm – Max. edge cross-section: – For strips: 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with contour milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Full description: see PDF

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: Godpfxovvi Rfo Adkobr - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, Leto izdelave: 2017, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Color: Grey Price: On request - Special features: - Description: Machine is currently displaying an error; error code: empty machine - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Number of units [pcs]: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure roller unit Gbodpfx Adeyll Snekjr - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Corner rounding unit - Tools included: Yes - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraper unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Glue system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (L x W x H) Financial information: Value added tax: The stated price is exclusive of VAT VAT/margin taxation: VAT reclaimable for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels