Žaga za določanje velikosti plošč

Scheer PA 4500

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller track (2-lane elements): 9 units Clamps: 7 units, first 3 with 2-finger design Air cushion table width: 650 mm, 4 pcs, each 2160 mm long Central blower: 1 unit with increased blower performance – 3 inclined lift clamps (2-finger): – 1 inclined lift clamp (1-finger): – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1–150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Hodpfjymx S Dsx Afwoff Angle alignment device, min. clamping width 0 mm, max. clamping width up to full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label program / label printer PICA 104

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SCHEER FM 16 Panel Dividing System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a powerful, electronically controlled panel dividing saw featuring state-of-the-art drive technology and intuitive controls. It has been completely overhauled and newly painted – its condition is almost as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Main Technical Data: Cutting length: 3100 mm Saw depth / Blade projection: 80 mm Saw motor: 7.0 kW Scoring unit motor: 1.1 kW (can be switched off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering User interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & Special Equipment: Longitudinal cutting saw FM 16-3100 with hardened guides and automatic forward/reverse feed Material feed table HP 5021 with 6 clamp carriages, servo drive & measurement resolution of 0.05 mm Angle pressure device WP, adjustment range 2400 mm, fully automatic Trim cutting device SP 5000 for remainder cuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with phenolic overlay Workpiece support table HP 5025 (1800 x 800 mm), also with phenolic overlay Air cushion tables at the front incl. radial fan Saw blades included: Hedpfx Aeunwk Tofweff KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Functionality: Fully operational Warranty: 12 months Dependable for Continuous Operation: This machine is in use worldwide—even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g. Thailand): the SCHEER FM 16 reliably runs in 3-shift operations – 365 days a year – and excels with maximum precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier parts and wear parts.) Flexibility & Individualization: We offer various models and equipment options—for every budget. In addition, we implement tailor-made special solutions according to your individual requirements. 📞 Contact us for a customized offer or to arrange a viewing appointment. The machine is available from stock. Delivery, commissioning, and training available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Max. panel width: 4400 mm Max. panel length: 4300 mm Max. main saw blade projection: 110 mm Hsdpsmt Hhwofx Afweff Number of clamps: 8

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Hfjdpsg Tu Rkofx Afwef Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Cormak MJ45-KB4 sliding table saw with scoring unit is an advanced machine, also known as a panel saw with a scorer. It is the ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and design: The Cormak MJ45-KB4 is a robust woodworking machine with a durable steel frame ensuring stability during operation. The large worktable, guided on hardened steel rods with a carriage length of 3200 mm and cutting units mounted on it, guarantees high efficiency and precision. Main cutting unit: Scoring unit: A key feature of this saw is the scoring unit, designed to eliminate internal stresses in wood by pre-scoring the underside of the workpiece. This feature makes the wood less prone to cracking and deformation after cutting. The 0.75 kW scoring unit motor ensures reliable trimming. Saw blade: The Cormak MJ45-KB4 sliding table saw is equipped with a circular saw blade as its main cutting tool. The electric motor drives the saw blade, enabling precise material cutting. With a 350 mm diameter blade, the maximum cutting height is up to 105 mm. Manual scorer adjustment: Simple and efficient manual adjustment of the scoring unit allows for quick and precise calibration. Stops facilitate restoring previous settings, while intuitive positioning near the operator’s workstation enables adjustments without interrupting workflow. Features and functions of the sliding table saw: - Large work surface: The saw features a spacious tabletop, simplifying the handling of larger sheets of material. - Smooth feed: The feed system utilizes precision-hardened steel guides with steel ball bearings, enabling longitudinal trimming even of long sheets or plywood. - Angle and cutting depth adjustment: Adjustable cutting angles and depths allow the tool to be tailored to specific project needs. - Safety systems: The saw is equipped with safety features such as guards and emergency stop systems to ensure operator safety. Applications of sliding table saws with scoring unit: Sliding table saws with scoring units are mainly used in woodworking and window manufacturing industries for cutting wood and wood-based materials. They are perfect for cutting boards, chipboards, MDF panels, and other similar materials. The Cormak MJ45-KB4 is a highly precise, advanced tool. Technical specifications: Table dimensions: 990 x 575 mm Format table length: 3200 mm Rip capacity at the rip fence: 1250 mm Cross-cut capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade height: 0–105 mm Saw blade height at 45°: 0–73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring blade speed: 8000 rpm Hedpfxjtz Smij Afweff Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Extraction port diameter under the table: 100 mm Extraction port diameter on blade guard: 80 mm Machine weight: 680 kg Saw supplied without cutting blades The price does not apply to machines sold in Poland.

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Hfjdpfx Afjvbtpowof

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Hsdpfeug Ty Hox Afwoff Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), premer žaginega lista: 305 mm, skupna dolžina: 3.100 mm, skupna širina: 3.100 mm, skupna masa: 3.000 kg, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, zahteva za prostor dolžina: 3.100 mm, potrebna širina: 3.100 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a powerful, electronically controlled panel dividing saw designed for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Equipment: - Longitudinal cutting saw FM 20-3100 with hardened guides - Automatic forward and return movement of the saw unit (automatic lowering on return) - Feed drive via three-phase gear motor with frequency inverter control - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Safety hood locking with louver curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm - Main saw motor: 7.0 kW | Scoring saw motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angular pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed phenolic (Pertinax) surface in the angular fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial ports - Network capable (LAN/WLAN), remote servicing via Internet (TeamViewer, Remote Desktop) - USB print function - Multilingual dialog programming - 15" flat screen, multifunction keyboard at swiveling control panel - Graphical display of cutting plans and workflows Hfjdpfx Aewrn Efjfwef Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angular fence table HP 5085: 1,720 x 800 mm | Phenolic top - Workpiece support table HP 5025: 1,720 x 800 mm | Phenolic top - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is in use worldwide — even under extreme conditions. Whether in Africa’s dry climate or the high humidity of Southeast Asia (e.g., Thailand), the PA 4136 delivers reliable operation in 3-shift systems — 365 days a year — and impresses with exceptional stability and durability. Guarantee: We are so convinced of the quality and durability of our machines that we offer a 7-year warranty on the machine structure and guideways. (Excludes electrical supplier parts and wear parts.) 📞 Contact us for an individual quotation or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price. Hfjdpewkf Ihsfx Afwof

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Hodpfxovwbp Aj Afwoff