Stroj za oblaganje robov

Hebrock AKV 2000 DK

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 maks. višina obdelovanca približno 40 mm min. dolžina obdelovanca približno 250 mm min. širina obdelovanca približno 70 mm Pomik približno 11 m/min. Pripravljen za obratovanje v približno 4-5 min. Poraba energije približno 11 kW Z ogrevanim vstopnim ravnilom S hitro grelnim lepilnim rezervoarjem Pnevmatsko kapiranje robov do 3 mm Njdpfx Aswka Tljgxola S kapirno žago za debelino roba do 5 mm Z rezkalno postajo po želji opremljeno s kombiniranimi rezkarji z izmenljivimi ploščicami za radiusno, ravno in posneto rezkanje Konzola, zložljiva in izvlečna proti sprednji strani S podvozjem Z integriranim odsesavanjem D x Š x V 3600 x 1400 x 1200 mm Teža približno 670 kg Razpoložljivost: kratkoročno Lokacija: Flörsheim

Leto izdelave: 2022, stanje: novo, angle: 0° - 90° maximum cutting length: 1,370 mm Nsdsi Ezr Njpfx Agxjla

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), širina obdelovanca (maks.): 70 mm, skupna masa: 800 kg, delovna višina: 870 mm, Technical data: Nledpfxjug Uqaj Agxoa Maximum edge thickness: 5 mm / 8 mm Maximum workpiece height: approx. 40 mm / 50 mm Minimum workpiece height: approx. 250 mm / 300 mm Minimum workpiece width: approx. 70 mm Feed rate: approx. 11 m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11 kW Electrical connection: 230/400V / 50/60 Hz Working table height: 870 mm Dimensions (LxWxH): 4100 x 1400 x 1300 mm Condition and further details as per images.

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Nsdsx S Hmzjpfx Agxola Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Nljdpfxoyfp N Do Agxsa Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 0-241-06-5232, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.608 h, največja višina reza: 125 mm, največja širina rezanja: 2.200 mm, dolžina rezanja (maks.): 4.300 mm, Panelna žaga Holzma HKL11/43/22 Maksimalna širina reza: 4300 mm Maksimalna dolžina reza: 2200 mm Nledpfxoxfvp Ae Agxea Maksimalna višina reza: 125 mm Žaga je v stalni uporabi, zato jo je mogoče videti med delovanjem. Stroj bo na voljo od 02/03/2026.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Stroj za lepljenje robov SCM Olimpic K560 je bil izdelan leta 2019. Opremljen je z 7" zaslonom na dotik z elektronskim upravljanjem Touch 7, podpira debeline robnih trakov od 0,4 do 3 mm in obdela plošče debeline od 8 do 60 mm. Stroj omogoča podajalno hitrost 12–14 m/min in ima sistem za lepljenje robov s toplim zrakom. Za dodatne informacije nas kontaktirajte. • Stanje stroja: dobro ohranjeno • 7" zaslon na dotik (16:9) z elektronskim upravljanjem Touch 7 • Debelina robnega traku: 0,4 – 3 mm • Debelina plošče: 8 – 60 mm • Minimalna dolžina plošče: 140 mm • Minimalna širina plošče: 100 mm • Podajalna hitrost: 12 – 14 m/min • Sistem za lepljenje robov s toplim zrakom Njdpfxjyabq Aj Agxola

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala Nljdpfxsxymfwo Agxsa - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg

Stanje: rabljeno, številka stroja/vozila: 008371, Tip uporabljenega roba: tanek rob, debel rob, masiven les Sistem lepljenja: EVA Nodsx Swfbopfx Agxjla Multifunkcijska enota: da Največja pomična hitrost: 16 m/min Največja debelina plošče: 60 mm Delovne enote: 7 št.

Leto izdelave: 2020, stanje: novo, Dvostranski zamikalni prislon Leto izdelave: 2020 Za hitro in neprekinjeno izdelavo zamikalnih rezov na ozkih in kratkih obdelovancih v kateremkoli kotu od 0° do 90° Nljdpekwhalefx Agxja Za odrezovanje do 1375 mm Enostavna uporaba in hitra namestitev na voziček žage Primeren za modele Panhans 680_10_20 Predelovalni set za druge modele na zahtevo Razpoložljivost: kratkoročno Skladišče: Hochheim