Dvosmerni stroji za lepljenje robov nakup rabljenega (71)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 Nsdpfx Aex Aqbhodvocp O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 Nsdpowxvdcefx Advjcp O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) “SOFTFORMING” Nedst N H Taopfx Advocp Edge material (rolls) thickness (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 8 / 60 Control/software: PC 22 / WoodCommander Feed speed (adjustable) m/min 10 - 40 Side adjustment of aggregate carrier, manual mm 30 - 80 FORMATTING SECTION: Spray unit (for liquid non-stick agent) Double milling unit KD 10 (2 x 6.6 kW) Milling unit for softforming (2 x 1.85 kW) 0°-20° Sanding belt unit for straight edge KS 10 (mm 120 x 2100) Clearance (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt adhesive + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with upper-lower cutters (In-Lay) Edge magazine for rolls E3 (compartment No. 6) End trimming unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90° Profile scraper unit PN20 (pneumatic) Finishing unit (flat scrapers + polishing unit) FA11

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) Nedpfxenzhxqj Advjcp - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 Nedpfx Adsv D U Urovecp O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 Ncsdpfshvi E Ijx Advep FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) Ncsdpsp N D Ngsfx Advsp EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Nsdpfsu Rc Anjx Advecp Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Nsdou Rc Hyopfx Advecp Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Ncsdpfxjuhv R Ds Advep Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, širina obdelovanca (maks.): 2.500 mm, dolžina obdelovanca (maks.): 200 mm, največja hitrost vrtenja: 18.000 obr/min, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 2,500 mm Minimum panel width: 130 mm Maximum panel height: 50 mm Minimum panel height: 8 mm Maximum panel length: 200 mm Minimum panel length: 30 mm UNITS Format Cutting Unit Unit: Corrections automatic adjustment by time Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefeeder for polyurethane adhesive Prefeeder for polyurethane adhesive D4-e Edge pressure roller conveyor Number of pressure rollers: 4 Edge Processing Unit 1 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 2 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge Processing Unit 4 Unit: Brush Number of motors: 2 Edge Processing Unit 5 Nsdoxxavtspfx Advocp Unit: Top-mounted router Number of motors: 1 Edge Processing Unit 6 Unit: Top-mounted router Number of motors: 1 MACHINE DETAILS Total installed power: 12 kW Glue system: PUR Press type: rubber-coated belts Number of units installed in format cutting: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 3.000 mm, največja debelina roba: 3 mm, hitrost pomika os X: 40 m/min, največja hitrost vrtenja: 6.000 obr/min, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel thickness min.: 8 mm Panel thickness max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Unit for end trimming Unit: double top and bottom pre-milling Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Edge pressure roller track Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling Number of motors: 2 Edge Processing Unit 3 Unit: Edge milling Number of motors: 2 Edge Processing Unit 4 Unit: Edge milling Number of motors: 2 Edge Processing Unit 5 Unit: Top milling Number of motors: 2 automatic engagement by time Nsdpfx Adjxxal Iovscp Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 EQUIPMENT PUR gluing system

Stanje: rabljeno, številka stroja/vozila: 005637, Vrsta pritrjene obrobe: tanka obroba, debela obroba Sistem lepljenja: EVA Ncsdpfx Asvw Ev Hjdvsp Stroj za lepljenje obrob: Stroj 1 Maks. širina plošče: 1300 mm Maks. podajalna hitrost: 50 m/min Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 12 kos

Stanje: rabljeno, številka stroja/vozila: 005639, Tip pritrjene obrobe: tanka obroba, močna obroba Ncjdpfx Adovw Evgevep Lepilni sistem: EVA Večnamenski agregat: da Stroj za lepljenje obrob: Stroj 1 in 2 Maks. širina panela: 3000 mm Maks. podajalna hitrost: 50 m/min Delovni agregati, desna stran: 12 kos Delovni agregati, leva stran: 12 kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: AH/003306, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 3.200 mm, hitrost pomika os X: 40 m/min, TEHNIČNE PODROBNOSTI Mobilna širina odprtine: 3.200 mm Maks. širina panela: 3.200 mm Min. višina panela: 10 mm Maks. višina panela: 60 mm Debelina robnega traku v roli, najmanj PVC-ABS: 0,3 mm Debelina robnega traku v roli, največ PVC-ABS: 3 mm Ncsdpfx Adjxx N D Hjvep Podajalna hitrost: 10 - 40 m/min Razdalja med vpotegnjenimi zatiči: 500 mm OPREMA Motoriziran pritiskalni gumijasti trak Nosilni transportni trak z vpotegnjenimi zatiči CNI krmiljenje v ločeni nadzorni omari Usmerjevalna enota z dvema motorjema (za vsako stran) Lepilna enota s predtalilcem za EVA lepilo Pritiskalni valji za robove Magazin za robove z dvema položajema Rezkalna enota z dvema motorjema Skupina za obrezovanje s prekrivanjem Stopničasta dodelovalna enota z dvema motorjema Obličevalna enota s 4 motorji Rezkalna enota nagibna 0-90° Enota za odstranjevanje robnih ostankov Krtačna skupina

Stanje: rabljeno, Double-sided edge banding machine, suitable for use in-line or offline as the first or second machine CNI control system located in a separate control cabinet Machine suitable for first and second panel pass Motorized mobile side opening via N.C., 3200 mm Maximum panel width: 3200 mm Panel height min. – max.: 10 – 60 mm Edge thickness in roll, min. – max., PVC-ABS: 0.3 – 3 mm Infinitely variable feed speed: 10 – 40 m/min Motorized pressure belt Conveyor track with retractable pins Distance between retractable pins: 500 mm Squaring section consisting of (each side): - Squaring unit with two motors Edging section consisting of (per side): - Gluing unit with pre-melter for EVA glue - Pressure rollers for edge banding Njdpskvrxqofx Advscp - Edge material magazine with two positions - End trimming unit with two motors - Overlapping trimming group - Staggered finishing unit with two motors - Corner rounding unit with four motors - 0–90° tilting milling unit - Edge scraper unit - Brushing unit

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Machine suitable for the 1st and 2nd pass of the panel. Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Anti-adhesive unit. Nodpfxeu Rim Ho Advocp Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Nedpfx Adepp Tkfovocp Squaring section consisting of: Non-stick unit Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: rabljeno, Leto izdelave: 2013, Numerical control PC office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile shoulder opening via NC, 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil, min - max (PVC-ABS): 0.3 - 3 mm Infinitely variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Nsdpfx Ajk Egvdodvocp Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consists for each side of: Non-stick group Timed splinter guard automation Double milling unit Edging section consists for each side of: Gluing unit with pre-melter for PUR adhesive and pre-melter for EVA adhesive Edge pressure rollers, electronically controlled by NC Edge holder magazine with 6 positions Cutting unit with two motors Overlapping cutting unit Staggered trimming unit with two electronically NC-controlled motors Corner rounding unit with 4 motors 0-90° swiveling planer group, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + dual stacked milling spindle (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraper group Brushing unit Phon (sound insulation) group

Stanje: rabljeno, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening by CNC, 1500 mm Panel height 60 mm PVC/ABS 3 mm Infinitely variable feed speed Electronically adjustable working height by CNC Motorized rubberized belt with superior pressure Squaring unit consisting of (on each side): * Double pre-milling unit * Automatically timed anti-splintering unit Edge unit consisting of (on each side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Pressure roller unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge change * Overlapping trimming unit with 2 motors * Picking unit with 2 tilting motors * Scraping unit tiltable from 0-90° * Edge scraper unit * Glue scraper unit * Belt sanding unit Ncodpforxzb Ujx Advsp * Brush unit

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edge Banding min / max: 14-65 mm Edge thickness min: 0.3 mm Max ABS size: 3 x 35 mm Panel thickness min / max: 60 mm Panel size: 220-3200 mm Working edge: 30-75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units: 1+1 Front Milling Units, 4 kW, pneumatic Nedpfxjtrgy No Advscp 1+1 Air jet for workpiece cleaning 1+1 Gluing station / hot melt adhesive unit GR_HMP-P HM-P EDGEBANDING UNIT FOR STRAIGHT EDGES This unit is designed for edgebanding of straight edges using a hot-melt adhesive with a removable tank including a pre-melter for rapid glue melting The unit includes: A Adhesive tank B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shear F Side pressure device G Glue unit tilting H Mobile table top 1+1 Edgeband feed unit, 5 stations 1+1 End trimming unit 0.35 kW, 12,000 rpm 1+1 Corner rounding unit, 1 kW, 12,000 rpm 1+1 Chamfer milling unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 RPM 1+1 Corner rounding head with two 0.35 kW motors 1+1 Milling unit, 4 kW, right side, left side free space (U28+U55), diameter 125 mm, 12,000 rpm 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0.29 kW, 1500 rpm SPO (150/50 x 50 mm) 1+1 ABS tape color enhancer, 1600 W