Mikron Vc 1000 nakup rabljenega (194)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates the buyer to collect the machine within the specified timeframe from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travels Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 sec Tool interface: HSK-A63 Cpsdpfx Ajxm Tx Defxju Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully loaded): 80 mm Max. tool diameter (partially loaded): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering hole: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine ON hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport is expected to take place on a truck with 3,000 mm loading width.

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Codpfx Afot Hw D Rjxepu Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R Cpedpfxju U Sabe Afxou We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cpodpfet Hwxbox Afxju Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Shown spare parts by hand are not included. Pallet changer EROWA is not included. Cpedpfx Aom Dtnrsfxsu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm Cedpfowy I Tlsx Afxepu EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection. Cpedjt I T N Espfx Afxju

Stanje: dober (rabljeno), Leto izdelave: 1991, Machine weight approx. 6 t The design of the base machine is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece is mounted between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive range of accessories Technical data: - Maximum module for gear hobbing cutters according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece diameter for manual loading: 200 mm - Max. workpiece diameter for automatic loading: 150 mm - Maximum workpiece length: 400 mm - Largest / smallest cutter diameter: 102 / 40 mm - Maximum cutter length: 230 mm - Largest / smallest cutter arbor diameter (standard): 32 / 16 mm - Axial slide travel = maximum milling length Z-axis: 300 mm - Radial slide travel X-axis: 140 mm - Shift slide travel (shift movement) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swiveling angle of shift milling head (left/right) A-axis: 50° / 60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm (*assuming '1ß0' is a typo for 100) - Y-axis (front face of milling spindle): 50 - 230 mm Cpedpfxsub Amfj Afxeu - W-axis (front face of tailstock spindle): 165 - 585 mm - Cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Stanje: dober (rabljeno), Leto izdelave: 1972, Premer kolesa - maks. 80 mm Širina kolesa 60 mm Modul - maks. 3 Cpedpfx Ajw N S D Sjfxou Modul - min. 0,1 Skupna potrebna moč 0,4 kW Teža stroja pribl. 120 kg Potrebni prostor pribl. 0,6x0,6x0,75 m Stroj je namenjen brušenju majhnih stožčastih oziroma ravno zobatih zobnikov. Za rezkanje stožčastih zobnikov se uporablja Mikron 102.01.

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Cpodpfjlu N Hiox Afxsu Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Codpfx Aecxxq Djfxjpu Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 6766, x-axis travel: 560 mm y-axis travel: 500 mm z-axis travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rates x/y/z - stepless: 2 - 3000 mm/min Cpodpfx Afocxxpqjxeu Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirements approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KU 4165M, potovalna razdalja osi X: 572 mm, pomik osi Y: 322 mm, pomik po osi Z: 265 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 22, The value of the supplied spare parts amounts to approx. € 70,000 TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: unlimited Remote Diagnostics: available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: parallel to main time, manual, with 3-axis handling or robot Part Feeding: paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-axis: 1,000 rpm Rotational Speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis clamped: 1,000 Nm Cjdpoxamh Eofx Afxopu Torque B-axis unclamped: 287 Nm Torque C-axis clamped: 300 Nm Torque C-axis unclamped: 187 Nm Main Spindle Tool Holder: HSK 40-A Outer Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal Coolant Supply up to: 120 bar Spindle Distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Operation: pneumatic, 6 bar Tool Changer Tool Discs: externally presettable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with Free Position: 105 mm Shortest Chip-to-Chip Time: ≥ 1 s Max. Weight of Tools on Disc: 15 kg Positioning Time per Tool Step: 250 ms Tool Holder: HSK 40-A, as per DIN 69893 MACHINE DETAILS Machine Dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per Machining Module: approx. 4.5 t Weight per Loading Module: approx. 2.5 t

Stanje: rabljeno, Leto izdelave: 1997, Technical details: X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed range: 5 - 5000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Cedpsvb Hzrofx Afxjpu Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer with 44 tools, flat guideways on all axes, guides protected by wipers and steel covers. Comes with a Heidenhain wired handwheel for convenient machine setup.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 43.100 h, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 61 m/min, hitri pomik os Y: 61 m/min, hitri pomik na osi Z: 61 m/min, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 60 m/min, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: 530,

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.84.01.011, potovalna razdalja osi X: 400 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 430 M, skupna višina: 2.830 mm, skupna dolžina: 3.200 mm, skupna širina: 2.600 mm, The Mikron HSM 400 is a high-precision high-speed machining center designed for processing complex workpieces in toolmaking, mold making, and precision engineering. The machine is engineered for high spindle speeds, dynamic axis movements, and excellent surface quality. STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26,897 h Axis drives & dynamics AC servomotors, ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotational speeds & accelerations: B-axis: up to 54,000 °/min C-axis: up to 90,000 °/min Cedpsx Hii Ijfx Afxopu Spindle (STEP-TEC) Manufacturer: Step-Tec AG (Switzerland) Tool interface: HSK-E40 Max. speed: 42,000 rpm Power: 13 kW (40% duty cycle) 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle) 3.2 Nm (100% duty cycle) Lubrication: Oil-air (Alternative configurations possible up to 60,000 rpm according to documentation) Tool & pallet system Tool changer: HSK-E40: 18 / 36 / 68 tools Tool change time: approx. 10 s Chip-to-chip: approx. 12.5 s Pallets / clamping systems (depending on configuration): Mecatool GPS: 240 × 240 mm Erowa UPC: 320 × 320 mm System 3R Dynafix: 280 × 280 mm Max. workpiece weight: up to 200 kg

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Cpjdpstqqpljfx Afxeu Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Csdjtz Sqhjpfx Afxjpu Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Total power requirement 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: rabljeno, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine no. 440911 Year of manufacture: approx. 1985, Overhauled and control system retrofit in 11/2000 Travel paths X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min.; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Mains connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (readout) - Control cabinet fixed to the machine rear Cpedpfx Afew A Af Ioxju - Coolant system in machine base - Swiveling operator panel - Electrical diagram, operator's manual for the control system available Required space (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel (X-axis): 630 mm Travel (Y-axis): 500 mm Cpsdpe H I Hdjfx Afxju Travel (Z-axis): 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 - 3150 rpm Feed rate, steplessly adjustable: 1 - 3000 mm/min Rapid traverse: X/Y 6 m/min, Z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1800 x 2120/2600 x 2020 mm Weight: 3100 kg Control: HEIDENHAIN, TNC 155

Stanje: dober (rabljeno), Leto izdelave: 2016, Prijemi (osne hode) XYZ: 800 x 800 x 550 mm, Miza: 500 x 500 mm, Os A: -91 / +121 stopinj, Os C: 360 stopinj, Krmilnik Heidenhain TNC 530, Število obratov vretena: 20.000/min, Cedpfswq A Rgex Afxspu Motor vretena: 36 kW, Vreteno HSK A63, Revija za 60 orodij, Transportni trak za odrezke (swarf conveyor).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.407, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, teža obdelovanca (maks.): 500 kg, skupna višina: 3.200 mm, skupna širina: 3.200 mm, širina mize: 600 mm, višina mize: 2.400 mm, dolžina mize: 600 mm, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 10.000 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 15.000 W, število vreten: 1, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, La MIKRON UCP 800 Duro de l’année 2018 est un centre d’usinage 5 axes haute performance, équipé d’une commande Heidenhain iTNC 530. La machine offre des courses de 800 x 650 x 500 mm (X/Y/Z) ainsi qu’un axe C avec plage de pivotement sans fin de 360°. Les types de broche/adaptateur NCD 150 PL et NCD 200 PL avec raccord HSK-E63 sont installés. Cjdpfx Asx D Ux Tefxopu Le système de table représenté n’est actuellement pas monté. L’équipement comprend un convoyeur à copeaux, un système de refroidissement avec filtre ainsi que la documentation complète. La machine est disponible à l’enlèvement, chargement sur camion, et a très peu tourné dans l’ensemble. Les heures de fonctionnement parlent d’elles-mêmes : Control ON : 30 064 h Machine ON : 10 322 h Program Execution : 4 159 h Drives ON : 7 331 h Spindle ON : 4 231 h La machine est sous tension et peut être démontrée à tout moment.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Cedswm I N Hopfx Afxspu Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), X-axis travel: 560 mm, Y-axis travel: 500 mm, Z-axis travel: 400 mm. Vertical clamping table dimensions: 300 x 450 mm. Number of threaded holes: 2 x 6. Threaded hole spacing: 45 mm. Thread: M16. Angular table clamping surface: 460 x 800 mm. Number of T-slots: 7. T-slot spacing: 63 mm. T-slot width: 14 mm. Max. workpiece weight (recommended): 350 kg. Milling spindle drive: Number of working spindle speeds: 21. Speed range (geometrically stepped): 40–4000 rpm. Step progression: 1.259. Spindle motor power: 3.3 / 4 kW. Tool holder: ISO 40 / M16 with draw-in slot. Vertical quill stroke: 90 mm. Stepless feed adjustment on all 3 axes: 2–3000 mm/min. Rapid traverse X-axis and Y-axis: 6000 mm/min. Rapid traverse Z-axis: 4000 mm/min. Feed motor torque longitudinal and transverse: 3.5 Nm each. Feed motor torque vertical: 7 Nm. Codpfx Afoxcxz Njxopu Control: Heidenhain TNC 407. Connected load: 8.7 kW. Length: 3705 mm. Width: 2430 mm. Height: 3100 mm. Machine weight with vertical milling head and angular table: 2410 kg. Crate base weight: 170 kg. Shipping crate weight: 400 kg. Operating hours: 18,924 h. Accessories: 3D probe, 20 tool holders, splash guard enclosure, coolant pump, work light, electronic handwheel, machine documentation. An on-site inspection is possible.

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Cpjdpfew Sxyxox Afxju