Obdelovalni center - navpično

MIKRON UM 710/900

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 410 / 426, Ta 3-osni vertikalni obdelovalni center MIKRON UM 710/900 je bil izdelan leta 1999. Opremljen je z upravljalnikom TNC 410/426, deluje na trifazno napajanje 400 V, 50 Hz, teža stroja znaša 5.000 kg. Zasnovan je za tok 50 A pri priključni moči 15 kW in ustreza CE standardom certificiranja. Preverite možnost nakupa tega vertikalnega obdelovalnega centra MIKRON UM 710/900. Za več informacij o tej stroji nas kontaktirajte. • Napajanje: trifazno, 400 V, 50 Hz • Nazivni tok: 50 A • Priključna moč: 15 kW • Teža (kg): 5000 • Električna shema št.: 152.53.80.1x2 Nkjdsx U Tgyspfx Adyet • Raven hrupa: 75 dB(A) • Certifikat: CE

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, hitrost vretena (min.): 16.000 obr/min, Stroj je v dobrem tehničnem stanju, - krmilni sistem Heidenhain TNC 426, zalogovnik za 20 HSK 63, vključno s sondo + 4. os. Nkedpsxfg Aysfx Adyot

Stanje: rabljeno, Leto izdelave: 1997, Technical details: X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed range: 5 - 5000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Nedpfx Adevb Hzreyjkt Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer with 44 tools, flat guideways on all axes, guides protected by wipers and steel covers. Comes with a Heidenhain wired handwheel for convenient machine setup.

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Nodpfxjv Scrbs Adyekt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: Nsdpfou Dm E Hex Adyekt • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° Nkodpfewlvlgjx Adyet SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Leto izdelave: 1988, Krmiljenje Grundig x-hod 700 mm y-hod 500 mm z-hod 400 mm Teža stroja cca 2,8 t +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje tudi najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih fotografij žal ni mogoče. +++++ Nkedsiqu S Eopfx Adyot

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Nksdpfx Aeh Tk Rvodyet Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: novo, Thread Diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe threading with no risk of breakage Nkodpfog N Nl Dox Adyjt - Forward/reverse operation selectable on the machine head - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: rabljeno, Leto izdelave: 1982, Workpiece weight: 60 kg Workpiece length: 700 mm Diameter: 500 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m O F F E R We can offer you, subject to prior sale and errors excepted, free of obligation, ex stock: H O F M A N N Germany Horizontal, electronically dynamic grinding wheel and worm grinding wheel balancing machine Type: EO-Re / MC 10 Year of manufacture: 1982 Modernized in 2008 and retrofitted with MC 10 control Software: MC 10 and PMG 81 measuring transducer _____ Balancing dimensions: Ø 500 mm x length approx. 700 mm Test body weight: approx. 5 – 60 kg Balancing speed: approx. 650 rpm Two planes, bearing journal diameter: 20 – 50 mm, agate prisms, drive via cardan shaft. Nkedpfx Ast Hxbqodyst Achievable accuracy: 1 mg/kg Further technical data can be provided on request. Weight: approx. 500 kg Ideal machine for balancing grinding wheels Condition: good to very good Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice We look forward to receiving your order. More than 300 good used machines in stock – feel free to enquire with us.