Mikron Um 600 nakup rabljenega (187)

Stanje: dober (rabljeno), Leto izdelave: 1997, Mikron UM 600 CNC rezkalni stroj Tehnični podatki Proizvajalec: Mikron AG Biel Švica Itjdpeyrhghsfx Adkjd Tip: UM 600 TNC 410 Teža stroja: 3340 kg Priključek: 3 faze 400 V 50 Hz Poraba toka: 40 A Priključna moč: 15 kW Krmilna napetost: 24 V DC Krmiljenje: Heidenhain TNC 410 Leto izdelave: 1997 Pomik X: 600 mm Pomik Y: 500 mm Pomik Z: 450 mm Vpenjalna površina: 900 x 530 mm Za pravilnost, popolnost in ažurnost podatkov ne prevzemamo odgovornosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 410/426, teža orodja: 12.000 g, This 3-axis vertical machining center MIKRON UM 600 was manufactured in 1997. If you are looking for high-quality milling capabilities, you should consider the MIKRON UM 600 machine we are offering for sale. Contact us for further information. Additional Equipment • Noise emission: sound power level of 75 dB(A) Machine Advantages Technical Machine Advantages • AC main spindle drive • Drive power at 40% duty cycle: 9 kW // drive power at 100% duty cycle: 6 kW • Max. torque at the spindle: 35 Nm • Infinitely variable speed control: yes • Tool spindles (FK 40) • Max. torque at the spindle at 40% duty cycle: 800 Nm • Adjustable speed range: 5 - 5000 rpm • Number of gear stages: 4 • Minimum clamping force: 100,000 N • Minimum ejection force: 3,500 N Additional Information Itjdex D Id Aopfx Adkjd Travel Movements Rapid traverse of clamping device (X-axis): 600 mm Rapid traverse of spindle slide (Z-axis): 500 mm Rapid traverse of clamping device (Z-axis): 450 mm AC feed drives Programmable feed speed: mm/min (X, Y-axis), mm/min (Z-axis) Rapid traverse speed: 15 m/min (X, Y-axis), 12 m/min (Z-axis) Feed force at 100% duty cycle: 9,000 N (X, Y-axis), 11,000 N (Z-axis) Media Coolant system Capacity: 150 liters Flow rate: approx. 30 l/min at 2.2 bar

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Itjdjqagugjpfx Adksd

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Maximum table load: 300 kg Control system: Heidenhain TNC 426 Tool holder: SK 40 Isdpowx Naqefx Adkotd Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be arranged Europe-wide, upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 1997, x-hod 600 mm y-hod 500 mm z-hod 450 mm Krmiljenje Heidenhain TNC 426 PB Orodjavni menjalnik z 22 mesti Orodna pritrditev SK40 Hitrost vrtenja 5-6.300 min⁻¹ Velikost mize 900 x 530 mm Obremenitev mize 400 kg Skupna priključna moč 9 kW Teža stroja ca. 3550 kg Iedpfx Adsykb Hlskstd Prostorske zahteve ca. 2,2 x 2,7 x 2,05 m 3-osni vertikalni obdelovalni center MIKRON UM 600, letnik 1997 Tehnično v vrhunskem stanju, vse vodila so na novo postrgana. Vreteno je bilo na novo uležajeno, od takrat le 262 ur v uporabi. Novi močnostni del za pogon vretena je nameščen. Dodatki: Merilni sistem Heidenhain TS 642 2 skoraj nova vpenjalna primeža Orodni nosilci SK40

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Heidenhain TNC 407 SK 40 air and water cooling Itodpfxogydn Ie Adkjd Tool changer with 22 positions Travel paths: 600 x 500 x 450 mm Spindle speeds: 5–5,000 rpm Feed rate: 0–10,000 mm/min Main spindle drive power: 6 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, 1 x rabljeni rezkalni stroj Mikron UME 600 Leto izdelave: 1995 Krmiljenje: TNC 407 X-hod: 600 mm Y-hod: 500 mm Z-hod: 450 mm Obrati: 5 - 5000 1/min Pinolni hod: 90 mm Skupna zahtevana moč: 9 kW Isdpfxeyvh U Ue Adkotd Območje podajanja: 0-10.000 mm/min Teža stroja cca: 3260 kg Dimenzije stroja cca: 2200x2800x2000 mm Vreteno: 6 kW Vertikalna rezkalna glava: SK 40 brez notranjega hlajenja vretena (WW)

Stanje: rabljeno, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board, circuit board - Manufacturer: Mikron, electronic module printed circuit board from CNC milling machine Mikron UME 600 - Type: 958 78 11 200 - Dimensions: 145/110/H55 mm - Weight: 0.4 kg Ijderc Ilgspfx Adkjtd

Stanje: rabljeno, CNC control, operator panel, machining center operator panel, operating unit, control panel, control unit - Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 - Model: TCD 22 - DIN 8659 - PCB: WW TCD 22 operating unit 104.73.20.042 - Individual components: see photos Iodpfxercnmwj Adkjtd - Dimensions: 480/240/H160 mm - Weight: 5.3 kg

Stanje: dober (rabljeno), Tool changer chain, chain magazine, tool changer system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining centre Mikron UME 600 -for: max. 22 holders -Holder type: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg Itodpfx Aorb E E Nsdksd

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za povrat energije Itedpjrb E Hbefx Adked -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 50A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0CA0 -Dimenzije: 290/50/H480 mm -Teža: 6,8 kg

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za vračanje energije Itederb E Hfepfx Adkjd -Proizvajalec: Siemens, LT-modul Simodrive 611 INT. 2X15A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AB00-0AA0 -Dimenzije: 290/50/H480 mm -Teža: 5,8 kg

Stanje: dober (rabljeno), Krmiljenje SPS, močnostni modul, LT-modul, E/R-modul, povratni modul Itsdpfx Aderb E Hqeksd -Proizvajalec: Siemens, Simodrive 611 LT modul INT. 25A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0BA2 -Dimenzije: 290/50/V480 mm -Teža: 5,8 kg

Stanje: rabljeno, Main spindle with drive motor, universal milling head, milling holder, milling extension, angular milling head, upper support, upper slide, dovetail guide, tool slide, cross table. - Manufacturer: Mikron, upper support and tool slide from CNC milling machine Mikron UME 600 - Motor: Siemens 380V 3.7/5.25 kW, see photo of nameplate - Speed: 1500/9000 rpm Itodpjrc Ik Hjfx Adked - Spindle head: SK40 taper - Dimensions: 1550/560/H735 mm - Weight: 555 kg

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load disconnect switch, load isolator, circuit breaker, isolator, auxiliary switch, main switch Itedpfxorc Ilnj Adkod -Manufacturer: Mikron, main switch/load disconnect switch from Mikron UME 600 CNC milling machine -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg

Stanje: dober (rabljeno), SPS krmiljenje, napajalni modul, LT modul, E/R modul, modul za regeneracijo energije -Proizvajalec: Siemens, Simodrive 611 E/R modul INT. 16/21KW CNC rezkalni stroj Mikron UME 600 Itjdpfxorb E Hms Adkjd -Tip: 6SN1145-1BA00-0BA0 -Dimenzije: 290/100/H480 mm -Teža: 10,6 kg

Leto izdelave: 2018, stanje: rabljeno, Computer monitor, screen, TFT industrial monitor Ijdpfx Adorcnmzskjtd - Monitor: TFT industrial monitor removed from CNC milling machine Mikron UME 600 - Model: 12.1" TFT industrial monitor 2363130 - Dimensions: 400/320/100 mm - Weight: 3.1 kg

Stanje: dober (rabljeno), Clamping table, angle plate, T-slot table, rotary table, milling machine table - Manufacturer: Mikron, milling machine table / T-slot table from CNC machining center UME 600 - Table surface: 530 x 900 mm - T-slots: slot width 14 mm, slot spacing 63 mm - Transport dimensions: 900/530/H390 mm Itjdjrbm Udepfx Adkjd - Weight: 248 kg

Stanje: dober (rabljeno), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, operating unit, operator terminal, HMI panel, handheld terminal, manual control panel - Manufacturer: Mikron, handheld operating terminal from CNC milling machine Mikron UME 600 - Connection plug: see photos - Transport dimensions: 400/240/H95 mm Isdpforc Ikxex Adkotd - Weight: 1.1 kg

Stanje: dober (rabljeno), PLC control, power module, LT module, I/O module, regenerative feedback module, CNC control, safety plug-in universal module, plug-in cards, circuit boards, control board, PCB Iodpforb E Ewex Adkjtd -Manufacturer: Mattle Mikron, safety plug-in universal module PCB from Mikron UME 600 CNC milling machine -Safety plug-in module: Type SEMU TN 24VDC -PCB: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz Itodpfswm I N Hox Adksd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 9.031 h, največja hitrost vretena: 5.000 obr/min, skupna masa: 3.200 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 407, moč vretenovega motorja: 9.000 W, število osi: 3, This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample space for various machining operations. If you are looking for a high-quality milling machine, consider the vertical machining center MIKRON UME600 we offer for sale. Contact us for further details. • Feed rate: max. 10,000 mm/min • Table size: approx. 900 × 530 mm • Automatic tool changer: none • Condition: Used, overall in good condition; fully functional and ready for operation • Machine hours: 11,643 h • Spindle hours: 9,031 h Additional equipment • Coolant pump • Machine vise • 3D probe system • Various collet sets / SK40 tool holders • Tool cabinet with worktop and vise • Further accessories available upon request Technical Specification Isdeyll Szopfx Adkjtd Taper size SK 40

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Iodpfx Adjw D Hhpoketd X-travel: 600 mm Y-travel: 500 mm Z-travel: 450 mm Machine weight approx.: 3.5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 18.742 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426/430, največja hitrost vretena: 18.000 obr/min, število osi: 3, To 3-osno vertikalno obdelovalno središče MIKRON VCP 600 je bilo izdelano leta 2001. Opremljeno je z izmenjevalcem orodij s 30 postajami, od katerih je trenutno mogoče uporabljati le 21. Visokohitrostno vreteno zaradi rahlega neravnovesja deluje pri 8.000 vrt/min. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra MIKRON VCP 600. Za več informacij nas kontaktirajte. • Izmenjevalec orodij: 30 mest; zaradi prejšnje kolizije je trenutno uporabnih 21 Iedpsx Stk Hefx Adketd • Vreteno: visoka hitrost, 18.000 vrt/min; rahlo neravnovesje, nedavno omejeno na 8.000 vrt/min • Število ur vretena: 18.742

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 5.743 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area is 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for precision machining of metals and alloys, offering a rigid construction and efficient cooling. Consider the opportunity to purchase this MIKRON VCP 600 vertical machining center. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle run time: 5,743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile: precise machining of a wide variety of materials • High-performance spindle for fast, precision machining • Sturdy, rigid construction for high accuracy even with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece change • Efficient cooling system for optimized performance and tool life Isdpfsx Imtyox Adkotd • Applications: Ideal for tool and mold making as well as the production of high-precision components in various industries Additional equipment • m&h 3D probe • Vice: not included