Mikron Um 600 nakup rabljenega (185)

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Werkzeugvermessung auf dem Tisch wird geliefert, Fpodpfxer Urm So Aplsg Die von Hand gezeigten Teile werden nicht mitgeliefert.

Stanje: dober (rabljeno), MIKRON UCP 600 VARIO je 5-osni obdelovalni center, zasnovan za visoko natančnost, preciznost in zanesljivost. Miza 320×320 mm; hodi X600 Y450 Z450; razdelitev C n x360°; rezkalna glava B -115/+30°. Orodni magazin za 30 mest; orodje: največji Ø 80 mm, dolžina 200 mm, masa 8 kg; vpenjalo HSK-A63. Vreteno brezstopenjsko 0–20.000 vrt/min, moč 30 kW, navor 91 Nm. Podajalna hitrost 15.000 mm/min, hitri pomik 22 m/min; priklop 3x400 V 50 Hz. Teža ~7.700 kg; mere D 6820׊ 4800×V 2540(2810) mm. Oprema: papirni filter, vodni hladilnik, transporter za odrezke, miza EROWA UPC, elektronski ročni kolo, svetilka, signalna luč. Osi 4+5 obnovljeni 2023. Dosega ozke tolerance; primeren za avtomobilsko, letalsko, medicinsko, urarsko in orodjarsko industrijo. Fedpeyxn Nkofx Aplopg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Pomiki osi X-pomik: 600 mm Y-pomik: 450 mm Z-pomik: 450 mm Velikost mize: 850 x 530 mm Delovno vreteno Hitrost vretena: 100 – 20.000 obr./min Vpenjalo orodja: HSK 63 Število mest v magazinu orodij: 30 kosov Fjdpfxoyvzbne Apljpg Dimenzije stroja: 3900 x 3500 x 2700 mm Teža: 6500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 18.742 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426/430, največja hitrost vretena: 18.000 obr/min, število osi: 3, To 3-osno vertikalno obdelovalno središče MIKRON VCP 600 je bilo izdelano leta 2001. Opremljeno je z izmenjevalcem orodij s 30 postajami, od katerih je trenutno mogoče uporabljati le 21. Visokohitrostno vreteno zaradi rahlega neravnovesja deluje pri 8.000 vrt/min. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra MIKRON VCP 600. Za več informacij nas kontaktirajte. Fedpfx Asx Stk Hoplepg • Izmenjevalec orodij: 30 mest; zaradi prejšnje kolizije je trenutno uporabnih 21 • Vreteno: visoka hitrost, 18.000 vrt/min; rahlo neravnovesje, nedavno omejeno na 8.000 vrt/min • Število ur vretena: 18.742

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 5.743 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area is 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for precision machining of metals and alloys, offering a rigid construction and efficient cooling. Consider the opportunity to purchase this MIKRON VCP 600 vertical machining center. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle run time: 5,743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile: precise machining of a wide variety of materials • High-performance spindle for fast, precision machining • Sturdy, rigid construction for high accuracy even with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece change • Efficient cooling system for optimized performance and tool life • Applications: Ideal for tool and mold making as well as the production of high-precision components in various industries Additional equipment • m&h 3D probe Fodpfxjx Imtys Aplspg • Vice: not included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 13.869 h, proizvajalec krmilnikov: HEIDENHAIN, število osi: 3, Ta 3-osna stroj MIKRON VCE 600 Pro je bila izdelana leta 2006. Opremljena je z Heidenhain krmiljem in držalom za vreteno SK40 ter ima skupno 13.869 ur vretena. Če iščete visokokakovostne rezkalne stroje, razmislite o stroju MIKRON VCE 600 Pro, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Ure vretena: 13.869 Fpedpfxsx Sz Dnj Aplsg Tehnične specifikacije Koničnik SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 20 m/min, skupna višina: 2.720 mm, skupna dolžina: 3.160 mm, skupna širina: 2.240 mm, For sale is a 3-axis CNC milling machine from the manufacturer Mikron, model VCE 600 Pro. The machine is in very good condition and ready for immediate use. Technical specifications: Year of manufacture: 2012 Control system: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis: 600 mm Y-axis: 500 mm Z-axis: 540 mm Max spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3160 x 2240 x 2720 mm Weight: 4,800 kg Included in the offer: chip conveyor, interior extraction unit, high-pressure coolant system (IKZ), hand control unit, coolant gun, 3D probe, Renishaw tool measurement Not included in the offer: clamping devices, tool holders On request, transport and loading throughout Europe can be organized at an additional cost. Prices are subject to VAT. Viewing by appointment is possible. Please contact us—our team looks forward to assisting you! Part exchange or trade-in possible! Machine buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your manufacturing operation? Or do you want to sell yours? For more information or contact options, please visit our website. Fodpfx Aexnprvsplopg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.32.99.077, potovalna razdalja osi X: 530 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 22 m/min, hitri pomik os Y: 22 m/min, hitri pomik na osi Z: 22 m/min, (Please state your offer price) Fsdpfx Apexrc Sqjlepg Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Spindle speed: 12,000 rpm Maximum table load: 380 kg Fpjdpfet Hr Ahjx Aplsg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, model krmilnika: iTNC Heidenhain 530, največja hitrost vretena: 42.000 obr/min, kot vrtenja osi C (maks.): 360 °, število osi: 5, No reserve price – guaranteed sale to the highest bidder! The offer includes: 2x 5-axis HSC machining centres + pallet system with robot MIKRON HSM 600 U (Serial number: 217.88.00.070) TECHNICAL DATA Travel distances Travel X: 800 mm Travel Y: 600 mm Travel Z: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / −110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): max. 217 Nm Clamping torque: 1,400 Nm B-axis Swivel range: +30° / −110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load: max. 120 kg Tool magazine: 68 stations Control: iTNC Heidenhain 530 Workpiece weight: max. 120 kg EQUIPMENT Swivel rotary table with Erowa UCP MIKRON HSM 400 U (Serial number: 217.87.00.178) TECHNICAL DATA Travel distances Travel X: 400 mm Travel Y: 240 mm Travel Z: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes Fodpfsx Hx T Aox Aplopg B-axis swivel range: ± 110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): max. 217 Nm Clamping torque: 500 Nm B-axis Swivel range: ± 110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): max. 686 Nm Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load: max. 25 kg Tool magazine: 36 stations Control: iTNC Heidenhain 530 EQUIPMENT Swivel rotary table EROWA ROBOT MULTI TWIN Gripper change station: 6 positions Grippers: various Storage system Rotary storage: 5 levels Storage allocation: Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measurement systems on all axes Infrared measuring probe LASER Set-up operation with electronic handwheel Graphite extraction: 2x BURN WK 5806 Rotary pallet storage

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, X-axis: 600 mm, Y-axis: 500 mm, Z-axis: 540 mm, maximum table distance: 690 mm, feed rate: 40 m/min, table dimensions: 700 x 500 mm, maximum workpiece weight: 800 kg, control system: Heidenhain TNC 620, connected load: 18 kVA, length: 2,240 mm, width: 3,338 mm, height: 2,803 mm, weight: 5.6 t, supplied with documentation, has seen little use. Fpodpsv Hndfjfx Apljg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1073098273, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, model krmilnika: HEIDENHAIN TNC 426, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04.12.2025! Placing a bid constitutes a binding commitment to collect the machine on time between 10.12.2025 and 12.12.2025! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 450 mm Feedrate in XYZ: 3,000 rpm Rapid traverse: max. 22 m/min Max. recommended working feed: 15 m/min Spindle speed: 100 – 18,000 rpm Tool holder: HSK-63 A Tool change time: approx. 5 s Chip-to-chip time: approx. 7 s Tool diameter: Ø 90 mm fully loaded / Ø 110 mm partially loaded Tool length: 250 mm without taper Tool weight: max. 6 kg Table size: 850 x 530 mm T-slots: 6 x 14 H12, reference slot 14 H7 in the center of the table Slot spacing: 63 mm Table load: max. 400 kg MACHINE DETAILS Control system: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Connection: 40 kW Rated current: 80 A Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,300 x 2,800 mm Weight: 6,800 kg EQUIPMENT Fpedoxvp Iyepfx Apleg 30-position tool changer

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Fsdpfx Apjlu N Hijljpg Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 22.032 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, skupna masa: 910 kg, število osi: 5, This 5-axis MIKRON HSM600U was manufactured in 2004. It offers an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a high-speed spindle capable of up to 36,000 revolutions per minute and a tool magazine with a capacity of 60 positions. If you are looking for high-quality machining capabilities, consider the vertical machining center MIKRON HSM600U we have for sale. It is fitted with a pallet changer. Contact us for further details. • Tool magazine capacity: 60 positions • Coolant system: Through-spindle coolant (IKZ) • Lubrication: Minimum quantity lubrication (MQL) • Electrical: 400 V, 50/60 Hz, 4 kVA, 5.7 A (full load) • Condition note: Supplied without tools, pallets, and vises (available separately) • Program run time: 35,982 h • Spindle hours: 22,032 h Additional Equipment • 6-fold pallet changer Fodsyly Scjpfx Aplopg • Table system: Delphin system (System 3R) • The following materials have been processed on the machine: • Aluminium • Steel • Non-ferrous metals • Plastics • Hardened steel • The following parts have been replaced/repaired: • Multiple power components, up to and including replacement of the throttle valve • Y-axis cover (2x) • X-axis cover • Ball screw bearing of the X-axis • Coolant pump motor • Several proximity sensors • 2x hydraulic pressure sensors • 1x hydraulic hose • As this unit was a series variant, it was converted to central lubrication • 2x 3R clamping system maintenance kits • Including clamping tables Technical Specification Taper size HSK 50

Stanje: dober (rabljeno), Leto izdelave: 1996, potovalna razdalja osi X: 710 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 5 obr/min, For sale: a Mikron machining centre, model UMS 710-900. Fjdpfjtt Acgsx Aplopg The machine is in good condition. New ball screws on X and Y axes, new Z-axis cover, and new Z-axis chip conveyor. Technical data: - X travel: 710 mm - Y travel: 630 mm - Z travel: 500 mm - CNC control: HEIDENHAIN TNC 426 - Table size: 1200 x 600 mm - Max. table load: 500 kg - Spindle taper: SK 40 with ring groove - Spindle speed range: 5 - 5000 rpm - Spindle drive power: 11 kW - Feed rate range: 0 - 10,000 mm/min - Rapid traverse: 10 m/min - Operating voltage: 400 V - Total connected load: 15 kW - Machine weight approx.: 5.0 t - Space requirements approx.: 2.40 x 3.40 x 2.30 m - Chip tray - No internal coolant supply (IKZ) - 44-position tool changer - Handwheel Initial filling with operating fluids on request possible. Upon request and for an additional fee, loading and transport (Europe-wide) can be organised. All prices are plus VAT. Viewing by appointment is possible. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik – 4. os vreteno 20.000 vrt./min, HSK 63 miza 850 x 530 mm hodi 600 x 450 x 450 mm Fodsw Dc Irepfx Aplspg menjalec 30 orodij teža 6500 kg

Stanje: zelo dobro (rabljeno), Travel distances: 1600 x 900 x 800 mm Table size: 1700 x 850 mm Spindle taper: SK40 Spindle speeds: up to 10,000 rpm Tool changer: 30 positions Control: HEIDENHAIN iTNC530 Fjdpfxjn Hqa Ts Aplspg 3D measuring probe Various accessories MARCELS MASCHINEN CH

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5.45.25.06, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Rok plačila za stroj je do 20.11.2025! Vsaka oddaja ponudbe zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! Fpjdpfx Asxnk Hboplsg TEHNIČNI PODATKI Premiki: X-os: 900 mm Y-os: 630 mm Z-os: 500 mm Območje obratov navpično in vodoravno: 5–5.000 obr/min Vpenjalo za orodje: SK 40/DIN 69871 Teža orodja: maks. 12 kg Premer orodja: maks. 200 mm Vpenjalna površina kotne mize: 1.200 x 600 mm Maksimalna teža obdelovanca: 500 kg PODROBNOSTI O STROJU Krmilje: HEIDENHAIN TNC 407 Dimenzije (D x Š x V): 3.500 x 2.900 x 2.200 mm Teža: 4.100 kg Prostornina hladilne tekočine: 150 l OPREMA Tehnična dokumentacija Opomba: Transport poteka s standardnim tovornjakom.

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Total power requirement 20 kW Machine weight approx. 5.8 t Fpodpfxetz Sqho Apljg Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 10.615 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 108.007.00.0065, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 900 mm, pomik po osi Z: 800 mm, obremenitev mize: 2.000 kg, največja hitrost vretena: 10.000 obr/min, Payment deadline for the machine is November 20, 2025! Submission of a bid obligates the winner to collect the machine on time, within the pick-up window from December 1, 2025 to December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Working Areas Fedpfx Apsxnkqaslopg Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Worktable Table dimensions: 1,700 x 850 mm Max. table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose to table: min. 100 mm / max. 900 mm Spindle speed max.: 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free slots: 85 mm Max. tool diameter with adjacent free slots: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm The height can be reduced to 2,900 mm if required. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probing system Technical documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530 i, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 24, Obdelovalni center MIKRON VCE600PRO z pomiki po 3+2 oseh X 600 Y 450 Z 540 mm, SK40 s 10.000 obr/min in ATC za 24 orodij. Odlično stanje. Fsdpfx Asqi Ufxjplopg

Stanje: rabljeno, Leto izdelave: 1995, X-pomik 710 mm Y-pomik 500 mm Z-pomik 500 mm Velikost mize 1000 x 600 mm CNC krmiljenje TNC 407 Heidenhain Območje pomika 1-3000 mm/min Fodpexukn Sefx Aplspg Hitri pomik 6 m/min Vpenjalo orodja ISO 40 Območje vrtljajev 20 - 3150 min⁻¹ Glavni pogon DC 7 kW Rezkalna glava vrtljiva + / - 90 ° Skupna priključna moč 15 kW Teža stroja pribl. 3,9 t Prostorska zahteva pribl. 2,5 x 2 x 2 m CNC orodna rezkalna naprava s krmiljenjem Heidenhain TNC 407.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 760 mm, pomik osi Y: 400 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 13 m/min, hitri pomik os Y: 13 m/min, hitri pomik na osi Z: 13 m/min, hitrost pomika os X: 5.000 m/min, hitrost podajanja osi Y: 5.000 m/min, hitrost podajanja os Z: 5.000 m/min, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 7.500 obr/min, VERTIKALNI OBDELOVALNI CENTER MIKRON VCE 750 HODI 760x500x400 mm VRETENO ISO 40 S 7.500 OBR/MIN MENJALNIK ORODIJ Z 20 POZICIJAMI PROGRAMIRLJIVA ŠOBA ZA HLADILNO TEKOČINO NA OBDELANEC NAVODILA ZA UPORABO IN VZDRŽEVANJE POLŽ ZA ODSTRANJEVANJE OSTRUŽKOV Fpodpoy Nx E Djfx Aplog POSODA ZA HLADILNO TEKOČINO

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), MIKRON HSM 400 U High-Speed Machining Center The exact scope of supply can be seen in the photo gallery. Included, among others: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Work Area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool holder: HSK E 40 Spindle power at 40% duty cycle: 13 kW Spindle power at 100% duty cycle: 10 kW Torque at 60% duty cycle: 4.25 Nm Torque at 100% duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Fpodpfx Apsigrf Isleg Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter (for full 360° rotation): 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Fpedpelnfggsfx Apleg Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.