Obdelovalni center

Mikron UMS 710-900 3-Achs

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking Fpjdpfx Aporqwbijleg ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: rabljeno, Leto izdelave: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Fjdpfx Astqqnwoplepg Control HEIDENHAIN, TNC 150 B Machine weight approx. 16 t

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Fpjdjtqqmhspfx Apljg Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Fpjdpfx Apotqqllslog Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system - X/Y/Z axes can also be operated via handwheels -

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface of the table: 1100 x 600 mm Table feed: 1 – 3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Fpjdpfsu Nda Esx Apleg Additional technical data: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang, min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control device - Heidenhain linear measuring system

Stanje: pripravljen za uporabo (rabljen), Erfurt PKZe 500/1000 trimming press Pressing force: 500 t Table dimensions: 1020 x 1420 mm Stroke: 400 mm Strokes per minute: 12 Main motor power: 41 kW Fodpfxjvbcxtj Aplopg Video available

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 2000 mm Višina konic nad suportom: 300 mm Razdalja med konicami: 1600 mm Hitrosti vrtenja: 3 - 2.500 vrt/min Vpenjalni konus lunete: MK 5 Premer izvrtine glavnega vretena: 62 mm Hod pinole: 190 mm Vzdolžni pomiki: pribl. 0,001-10 nastavljivo mm/obrat Prečni pomiki: pribl. 0,001-5 nastavljivo mm/obrat Hitri pomik X-os: do 5000 m/min. Skupna potrebna moč: 40 KVA Fsdpfx Aew Rkt Isplepg Teža stroja pribl.: 5,6 t Dimenzije stroja pribl. DxŠxV: 4,0 x 2,0 x 1,9 m Vključno z dodatno opremo, glej fotografijo

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Fjder Urm Sjpfx Apljpg Werkzeugvermessung auf dem Tisch wird geliefert, Die von Hand gezeigten Teile werden nicht mitgeliefert.

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, CNC control Sinumerik 840D NC rotary table B-axis Magazine for 320 tools Pallet changer device, 2 pallets 500mm x 500mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Fpjdpfxjq Ui Hqs Aplog Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive capacity 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and machine description are not binding.

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Fedsh Hvk Ajpfx Apljpg Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition