Mikron Ums 600 nakup rabljenega (184)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Lhodpewm I N Hofx Adked Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 410/426, teža orodja: 12.000 g, This 3-axis vertical machining center MIKRON UM 600 was manufactured in 1997. If you are looking for high-quality milling capabilities, you should consider the MIKRON UM 600 machine we are offering for sale. Contact us for further information. Additional Equipment • Noise emission: sound power level of 75 dB(A) Lsdpfx Adox D Id Aokshd Machine Advantages Technical Machine Advantages • AC main spindle drive • Drive power at 40% duty cycle: 9 kW // drive power at 100% duty cycle: 6 kW • Max. torque at the spindle: 35 Nm • Infinitely variable speed control: yes • Tool spindles (FK 40) • Max. torque at the spindle at 40% duty cycle: 800 Nm • Adjustable speed range: 5 - 5000 rpm • Number of gear stages: 4 • Minimum clamping force: 100,000 N • Minimum ejection force: 3,500 N Additional Information Travel Movements Rapid traverse of clamping device (X-axis): 600 mm Rapid traverse of spindle slide (Z-axis): 500 mm Rapid traverse of clamping device (Z-axis): 450 mm AC feed drives Programmable feed speed: mm/min (X, Y-axis), mm/min (Z-axis) Rapid traverse speed: 15 m/min (X, Y-axis), 12 m/min (Z-axis) Feed force at 100% duty cycle: 9,000 N (X, Y-axis), 11,000 N (Z-axis) Media Coolant system Capacity: 150 liters Flow rate: approx. 30 l/min at 2.2 bar

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Lhjdpfjw D Hhpsx Adkjd X-travel: 600 mm Y-travel: 500 mm Z-travel: 450 mm Machine weight approx.: 3.5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Heidenhain TNC 407 SK 40 air and water cooling Tool changer with 22 positions Travel paths: 600 x 500 x 450 mm Spindle speeds: 5–5,000 rpm Lhjdpfx Adogydn Ioked Feed rate: 0–10,000 mm/min Main spindle drive power: 6 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Pomiki osi X-pomik: 600 mm Y-pomik: 450 mm Z-pomik: 450 mm Velikost mize: 850 x 530 mm Delovno vreteno Hitrost vretena: 100 – 20.000 obr./min Vpenjalo orodja: HSK 63 Število mest v magazinu orodij: 30 kosov Dimenzije stroja: 3900 x 3500 x 2700 mm Teža: 6500 kg Lhodpoyvzbnsfx Adkod

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 18.742 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426/430, največja hitrost vretena: 18.000 obr/min, število osi: 3, To 3-osno vertikalno obdelovalno središče MIKRON VCP 600 je bilo izdelano leta 2001. Opremljeno je z izmenjevalcem orodij s 30 postajami, od katerih je trenutno mogoče uporabljati le 21. Visokohitrostno vreteno zaradi rahlega neravnovesja deluje pri 8.000 vrt/min. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra MIKRON VCP 600. Za več informacij nas kontaktirajte. • Izmenjevalec orodij: 30 mest; zaradi prejšnje kolizije je trenutno uporabnih 21 • Vreteno: visoka hitrost, 18.000 vrt/min; rahlo neravnovesje, nedavno omejeno na 8.000 vrt/min • Število ur vretena: 18.742 Lhedpox Stk Hofx Adksd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 5.743 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area is 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for precision machining of metals and alloys, offering a rigid construction and efficient cooling. Consider the opportunity to purchase this MIKRON VCP 600 vertical machining center. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle run time: 5,743 hours Lhedpfx Adjx Imtyeked • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile: precise machining of a wide variety of materials • High-performance spindle for fast, precision machining • Sturdy, rigid construction for high accuracy even with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece change • Efficient cooling system for optimized performance and tool life • Applications: Ideal for tool and mold making as well as the production of high-precision components in various industries Additional equipment • m&h 3D probe • Vice: not included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 13.869 h, proizvajalec krmilnikov: HEIDENHAIN, število osi: 3, Ta 3-osna stroj MIKRON VCE 600 Pro je bila izdelana leta 2006. Opremljena je z Heidenhain krmiljem in držalom za vreteno SK40 ter ima skupno 13.869 ur vretena. Če iščete visokokakovostne rezkalne stroje, razmislite o stroju MIKRON VCE 600 Pro, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Ure vretena: 13.869 Tehnične specifikacije Ljdsx Sz Dnspfx Adkehd Koničnik SK 40

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, CNC control Heidenhain iTNC530 NC rotary swivel table (B-axis and C-axis) Ledpfjvmqkuex Adkjhd Pallet changer with 7 storage positions, 300mm x 300mm each 30-position automatic tool changer Electronic handwheel Internal coolant supply (IKZ) Chip conveyor Coolant unit Technical data: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis swivel table: -115° / +30° C-axis rotary table: 360° Table size: 300 x 300 mm Spindle taper: HSK 63 Spindle speed range: 20 – 20,000 rpm Tool changer: 30 positions Machine weight approx.: 7,700 kg Technical data, accessories, and machine description are not binding.

Stanje: dober (rabljeno), Leto izdelave: 1996, Travel X/Y/Z 600/500/450 mm, HEIDENHAIN TNC 410PA control, spindle power 9 kW, spindle speeds 5-6300 rpm, taper SK40, table size 530x900 mm, max. table load 400 kg, tool magazine with 22 positions, dimensions 2200x2700x2050 mm, approx. 3550 kg, accessories: Renishaw tool measurement, 4th axis TRIAG rotary table with clamping devices, wireless data transmission, software updated, flat screen, tool holders, operator manuals Lhsdeqagugspfx Adkjd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, 1 x rabljeni rezkalni stroj Mikron UME 600 Leto izdelave: 1995 Krmiljenje: TNC 407 X-hod: 600 mm Y-hod: 500 mm Z-hod: 450 mm Obrati: 5 - 5000 1/min Pinolni hod: 90 mm Skupna zahtevana moč: 9 kW Območje podajanja: 0-10.000 mm/min Lhodjyvh U Ujpfx Adksd Teža stroja cca: 3260 kg Dimenzije stroja cca: 2200x2800x2000 mm Vreteno: 6 kW Vertikalna rezkalna glava: SK 40 brez notranjega hlajenja vretena (WW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 20 m/min, skupna višina: 2.720 mm, skupna dolžina: 3.160 mm, skupna širina: 2.240 mm, For sale is a 3-axis CNC milling machine from the manufacturer Mikron, model VCE 600 Pro. The machine is in very good condition and ready for immediate use. Technical specifications: Year of manufacture: 2012 Control system: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis: 600 mm Y-axis: 500 mm Z-axis: 540 mm Max spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3160 x 2240 x 2720 mm Weight: 4,800 kg Included in the offer: chip conveyor, interior extraction unit, high-pressure coolant system (IKZ), hand control unit, coolant gun, 3D probe, Renishaw tool measurement Not included in the offer: clamping devices, tool holders On request, transport and loading throughout Europe can be organized at an additional cost. Prices are subject to VAT. Viewing by appointment is possible. Please contact us—our team looks forward to assisting you! Part exchange or trade-in possible! Machine buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Ljdpfx Aexnprvjdkohd Are you looking for a high-quality but affordable metalworking machine for your manufacturing operation? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Maximum table load: 300 kg Control system: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be arranged Europe-wide, upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Lsdjwx Naqepfx Adkohd Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1996, potovalna razdalja osi X: 710 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 5 obr/min, For sale: a Mikron machining centre, model UMS 710-900. The machine is in good condition. New ball screws on X and Y axes, new Z-axis cover, and new Z-axis chip conveyor. Technical data: - X travel: 710 mm - Y travel: 630 mm - Z travel: 500 mm - CNC control: HEIDENHAIN TNC 426 - Table size: 1200 x 600 mm - Max. table load: 500 kg - Spindle taper: SK 40 with ring groove - Spindle speed range: 5 - 5000 rpm - Spindle drive power: 11 kW - Feed rate range: 0 - 10,000 mm/min - Rapid traverse: 10 m/min - Operating voltage: 400 V - Total connected load: 15 kW - Machine weight approx.: 5.0 t - Space requirements approx.: 2.40 x 3.40 x 2.30 m - Chip tray - No internal coolant supply (IKZ) - 44-position tool changer - Handwheel Initial filling with operating fluids on request possible. Upon request and for an additional fee, loading and transport (Europe-wide) can be organised. All prices are plus VAT. Viewing by appointment is possible. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch... Ledpstt Acgofx Adkjhd

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1033618, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, vrtilni moment: 600 Nm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC 530, skupna višina: 2.800 mm, skupna dolžina: 2.900 mm, skupna širina: 2.600 mm, širina mize: 500 mm, dolžina mize: 700 mm, obremenitev mize: 800 kg, skupna masa: 6.000 kg, največja hitrost vretena: 10.000 obr/min, delovne ure vretena: 10.871 h, število mest v zalogovniku orodij: 24, montažni premer: 40 mm, teža orodja: 6.000 g, MIKRON VCE 600 PRO CNC vertikalni obdelovalni center - Obratovalna napetost: 3 x 400 V - Frekvenca: 50/60 Hz - Nazivni tok: 32 A Lhedpfxsyiznas Adkod - Priključna moč: 16 kW - Orodni nosilec: ISO 40 - Moč vretena za orodje: 12 kW - Navor pri 100 %: 600 Nm - Čas menjave orodja: 6 sek - Čas span-to-span: 8 sek - Število utorov: 5 - Razdalja med utori: 100 mm Opomba: brez orodnih nosilcev prikazanih na fotografijah! FCA D-73235 Weilheim Teck – naloženo na tovornjak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.32.99.077, potovalna razdalja osi X: 530 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 22 m/min, hitri pomik os Y: 22 m/min, hitri pomik na osi Z: 22 m/min, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. Lhsdpfx Adexrc Sqoked No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 1997, x-hod 600 mm y-hod 500 mm z-hod 450 mm Krmiljenje Heidenhain TNC 426 PB Orodjavni menjalnik z 22 mesti Orodna pritrditev SK40 Hitrost vrtenja 5-6.300 min⁻¹ Velikost mize 900 x 530 mm Obremenitev mize 400 kg Skupna priključna moč 9 kW Teža stroja ca. 3550 kg Prostorske zahteve ca. 2,2 x 2,7 x 2,05 m Ledpfxeykb Hlo Adkehd 3-osni vertikalni obdelovalni center MIKRON UM 600, letnik 1997 Tehnično v vrhunskem stanju, vse vodila so na novo postrgana. Vreteno je bilo na novo uležajeno, od takrat le 262 ur v uporabi. Novi močnostni del za pogon vretena je nameščen. Dodatki: Merilni sistem Heidenhain TS 642 2 skoraj nova vpenjalna primeža Orodni nosilci SK40

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Spindle speed: 12,000 rpm Maximum table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France) Lsdpfxst Hr Ahe Adkshd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, X-axis: 600 mm, Y-axis: 500 mm, Z-axis: 540 mm, maximum table distance: 690 mm, feed rate: 40 m/min, table dimensions: 700 x 500 mm, maximum workpiece weight: 800 kg, control system: Heidenhain TNC 620, connected load: 18 kVA, length: 2,240 mm, width: 3,338 mm, height: 2,803 mm, weight: 5.6 t, supplied with documentation, has seen little use. Ljdpfov Hndfex Adkehd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, model krmilnika: iTNC Heidenhain 530, največja hitrost vretena: 42.000 obr/min, kot vrtenja osi C (maks.): 360 °, število osi: 5, No reserve price – guaranteed sale to the highest bidder! The offer includes: 2x 5-axis HSC machining centres + pallet system with robot MIKRON HSM 600 U (Serial number: 217.88.00.070) TECHNICAL DATA Travel distances Travel X: 800 mm Travel Y: 600 mm Travel Z: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / −110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): max. 217 Nm Clamping torque: 1,400 Nm Lhodpfx Asx Hx T Ajdkjd B-axis Swivel range: +30° / −110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load: max. 120 kg Tool magazine: 68 stations Control: iTNC Heidenhain 530 Workpiece weight: max. 120 kg EQUIPMENT Swivel rotary table with Erowa UCP MIKRON HSM 400 U (Serial number: 217.87.00.178) TECHNICAL DATA Travel distances Travel X: 400 mm Travel Y: 240 mm Travel Z: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ± 110° C-axis rotation range: 360° C-axis Rotary table rotation range: n x 360° Rotation speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): max. 217 Nm Clamping torque: 500 Nm B-axis Swivel range: ± 110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): max. 686 Nm Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load: max. 25 kg Tool magazine: 36 stations Control: iTNC Heidenhain 530 EQUIPMENT Swivel rotary table EROWA ROBOT MULTI TWIN Gripper change station: 6 positions Grippers: various Storage system Rotary storage: 5 levels Storage allocation: Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measurement systems on all axes Infrared measuring probe LASER Set-up operation with electronic handwheel Graphite extraction: 2x BURN WK 5806 Rotary pallet storage

Stanje: dober (rabljeno), Leto izdelave: 2000, 20.000 U/min, Werkzeugvermessung auf dem Tisch wird geliefert, Die von Hand gezeigten Teile werden nicht mitgeliefert. Lsdpfx Ader Urm Sskehd

Stanje: rabljeno, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board, circuit board - Manufacturer: Mikron, electronic module printed circuit board from CNC milling machine Mikron UME 600 - Type: 958 78 11 200 - Dimensions: 145/110/H55 mm Ljdpfxorc Ilgs Adkjhd - Weight: 0.4 kg

Stanje: rabljeno, CNC control, operator panel, machining center operator panel, operating unit, control panel, control unit - Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 - Model: TCD 22 - DIN 8659 - PCB: WW TCD 22 operating unit 104.73.20.042 - Individual components: see photos - Dimensions: 480/240/H160 mm - Weight: 5.3 kg Ledpfjrcnmwsx Adkohd

Stanje: dober (rabljeno), Tool changer chain, chain magazine, tool changer system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining centre Mikron UME 600 -for: max. 22 holders -Holder type: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg Lhodpfjrb E E Nox Adkjd

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za povrat energije -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 50A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0CA0 -Dimenzije: 290/50/H480 mm -Teža: 6,8 kg Lhodpforb E Hbjx Adkod