Lms nakup rabljenega (160)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 98043, premer žaginega lista: 400 mm, največja hitrost vrtenja: 3.000 obr/min, skupna masa: 200 kg, širina vpenjanja: 220 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Nakladanje je mogoče 8. 9. 2025 ali 9. 9. 2025! TEHNIČNE PODROBNOSTI Žagalna enota Maksimalni premer žaginega lista: 400 mm Maksimalna vpenjalna širina: 220 mm Codpfx Ajw Hr Hvjfnspw Maksimalno število vrtljajev: 3.000 vrt./min Razrezni razponi Presek materiala pri 90° masivni okrogli material: 60 mm Presek materiala pri 90° cevni material: 140 mm Rez pri 90° (kvadrat): 110 x 110 mm Rez pri 90° (pravokotnik): 180 x 100 mm Premer reza pri 45° masivni okrogli material: 60 mm Premer reza pri 45° cevni material: 130 mm Rez pri 45° (kvadrat): 100 x 100 mm Rez pri 45° (pravokotnik): 150 x 100 mm Največja dolžina prislona: 2.200 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 3.400 x 1.200 x 1.900 mm Teža: 200 kg OPREMA Valjčna proga Opomba: Leva valjčna proga s prislonom je vključena v prodajo in dobavo. Desna valjčna proga ni vključena.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), proizvajalec krmilnikov: SIEMENS, skupna višina: 1.900 mm, This LAFRANCONI LM 400 press brake was manufactured in 2020. It features an NC roll feeder, a maximum stroke rate of 350 strokes/min, and a material width of 60 mm. The machine operates with a central ram force of 20 kN and a stroke of 45 mm. It is powered by a 10.6 kW asynchronous spindle motor and has a variable speed range from 20 to 350 rpm. The machine dimensions are approximately 2450×1300×1900 mm. Please contact us for further information about this machine. • Maximum stroke rate: 350 strokes/min • Maximum material width: 60 mm Codpfx Afox D Efqsnjpw • Standard tip punch force: 20 kN • Standard center punch stroke: 45 mm • Air pressure for pneumatic clutch: 6 bar • Machine external dimensions (W×H×D, without safety enclosure): 2000×2000×900 mm • Control cabinet dimensions (W×H×D): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Combination brake (mechanical) / Clutch (pneumatic) • Speed: adjustable from 20 to 350 rpm Additional features • NC roll feeder (feed length freely programmable) Dimensions Machine depth: 2450 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 280 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 165 mm, pomik osi Y: 50 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 11.000 W, proizvajalec krmilnikov: FANUC, število osi: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning center was manufactured in 2021. It features a slant-bed lathe design with main and sub spindles, two turrets, and a Y-axis with driven tools. Equipped with a Fanuc F31i A CNC control, it offers a turning diameter of 230 mm and a turning length of 673 mm. If you are looking for a high-quality CNC lathe, consider the Hyundai Wia LM 1800TTSY machine we have for sale. Please contact us for further information. Additional equipment • USB interface • Three-color signal tower • 1 set of soft jaws • CHIP CONVEYOR HS with side discharge • Transformer including cables • Manual compressed air gun • Bar feeder interface • Parts catcher main spindle • Parts unloader: part unloading system for sub spindle including part conveyor belt • Workpiece ejector / Workpiece Ø: 230 mm / Workpiece length: 673 mm Machine advantages Technical machine advantages • Linear guideways (Z) and flat guideways (X/Y) 45 degrees • Max. turning diameter: 230 mm // Max. turning length: 673 mm • Chuck size both spindles: 8 inches (~210 mm) • Turret C-axis, 0.001° // turret Y-axis, ±50 mm - upper turret • Driven tools: 5000 rpm, 5.5 kW • 1 x axial driven tool holder // 1 x radial driven tool holder • Automatic tool setter • Coolant tank 270 liters // standard coolant nozzle • Through-spindle coolant, 30 bar • 30 bar coolant pump (60 Hz) Further information Significantly reduced interfering contours Improved workpiece accessibility Workpiece stabilization by axial draw against part stop Chuck type: SPANNTOP mini Chuck model: Axzug Chuck size: 65 Short taper standard: DIN ISO 702-1 Short taper size: Size 6 Clamping device length: 155.00 mm Frontal diameter: 111.00 mm Max. outer diameter: 165.00 mm Clamping position: 65.00 mm Thread of clamping device: M102x1.5 Basic design of stop: Clamped Operation type: Power actuated Additional chuck options: Yes Front stop assembly: Yes Balancing quality: 4.0 Draw tube adapter as per drawing For clamping device [ZCHN]: A054288.0009C Connection [of clamping device]: Internal thread Clamping device thread specification: M102x1.5 Clamping device thread length: 17.00 mm Clamping device thread position: 65.00 mm Maximum actuation force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of draw tube]: External thread Thread specification: M74x1.5 Thread length: 40.00 mm Front position draw tube: 57.50 mm Stroke of clamping cylinder: 17.50 mm Spindle bore diameter: 76.00 mm Draw tube inner diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck type: SPANNTOP mini Chuck model: Axfix Chuck size: 65 Short taper standard: DIN ISO 702-1 Short taper size: Size 6 Clamping device length: 138.00 mm Frontal diameter: 119.00 mm Csdpfxex D Itdj Afnspw Max. outer diameter: 167.00 mm Clamping position: 50.00 mm Thread of clamping device: M94x1.5 Basic design of stop: Clamped Operation type: Power actuated Additional chuck options: Yes Front stop assembly: Yes Balancing quality: 4.0 Draw tube adapter as per drawing For clamping device [ZCHN]: A071618.0004C

Stanje: dober (rabljeno), Leto izdelave: 2008, Comparable to Elumatec, Mecal, Fom, Pertici, etc. Cpsdpjxgpvrofx Afnow Ideal for processing insect screen systems! For saw blade diameter 500mm, cutting length 5000mm Double mitre saw with pneumatically outward swivelling heads, designed for cutting aluminium and PVC profiles. The right, movable saw unit automatically positions itself to the profile length entered in the control system. In addition to the necessary safety equipment, vertical and horizontal clamping devices are included in the scope of delivery. Swivelling the heads The aggregates are swivelled via pneumatic cylinders. Cuts in the mitre range from 90° to 22.5° outward are possible. Intermediate angles can be set manually using a corresponding stop. The cutting area features automatically opening and closing protective hoods. Profile support roller conveyor at the movable unit with clamping device Spray misting system with macro function A suitable extraction system is currently also available as an option!

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Samodejna vrtljiva miza za živila, miza se vrti, nastavljiva hitrost, neuporabljena Csdpfxoym U Ale Afnepw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 560 mm, skupna višina: 1.700 mm, skupna masa: 3.550 kg, proizvajalec krmilnikov: FANUC, model krmilnika: i – SMART PLUS, največja dolžina izdelka: 2.970 mm, število osi: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It offers a maximum turning diameter of Ø300 mm and a turning length of 529 mm, featuring a spindle speed of up to 6,000 rpm. The machine is equipped with a turret for 12 tools and supports milling operations with a tool speed also up to 6,000 rpm. Ideally suited for precision turning and milling tasks. Please contact us for further information regarding this machine. • Condition: Original packaging, 0 operating hours • Capacity: • Max. swing: Ø600 mm • Swing over carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm • Bar capacity (main): Ø32 mm • Chuck size (main): 5" • Spindle (main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 hp) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf-ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° • Feed: • Rapid traverse rate (X/Z): 15 m/min • Carriage type: Roller guideway • Turret • Number of tool stations: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 s • Live tooling Cedeycv Egspfx Afnspw • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 hp) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf-ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubrication tank: 0.7 l • Power supply • Electrical capacity: 23 kVA • Power cable thickness: over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, največja hitrost vretena: 5.000 obr/min, pomik osi Y: 100 mm, skupna višina: 2.080 mm, skupna masa: 8.500 kg, največja dolžina izdelka: 3.650 mm, število osi: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025 and features a maximum turning diameter of Ø230 mm and a length of 673 mm. It is equipped with a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, two 12-station turrets, and rapid traverses to ensure efficient operation. Ideal for complex turning applications. Contact us for further details about this machine. • Packaging: Original packaging • Capacity: • Swivel carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm • Motor (max/cont.) (1st/2nd): 22/11 kW (30/15 hp) • Torque (max/cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travel (X1/X2): 165/195 mm • Travel (Z1/Z2): 700/720 mm Cpsdpfx Asycvzbofnew • Travel (ZB): 668 mm • Feed speed (X1/X2): 20/20 m/min (787/787 ipm) • Rapid traverse (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid traverse (Y): 7.5 m/min (295 ipm) • Rapid traverse (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): Linear guide • Turret: • Number of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type • Driven tooling: • Milling tool speed: 5,000 rpm • Motor (max/cont.): 5.5/1.1 kW (7.4/1.5 hp) • Torque (max/cont.): 47/14 Nm (34/10 lbf ft) • Collet chuck size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubrication tank: 4 L (1.06 gal) • Power supply: • Electrical power: 60 kVA • Main cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Control: FANUC 31i-B Plus / SIEMENS 840D

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, proizvajalec krmilnikov: FANUC, model krmilnika: 21‑i TB, Tato 4osá HYUNDAI KIA SKT 21 LMS byla vyrobena v roce 2014. Je vybavena řídicím systémem Fanuc 21-i TB, maximálním průměrem obrábění Ø 254 mm a obráběcí délkou 531 mm. Rychlost vřetena dosahuje až 6 000 ot/min, stroj má revolverovou hlavu na 12 nástrojů a dopravník třísek. Pokud hledáte vysoce kvalitní soustruh, zvažte HYUNDAI KIA SKT 21 LMS, který nabízíme k prodeji. Pro více informací nás kontaktujte. Výhody stroje Technické výhody stroje: • Počet os: 4 (X, Z, C, B) / pojezd osy X: 221 mm / pojezd osy Z: 549 mm • Max. průměr obrábění: Ø 254 mm / max. délka obrábění: 531 mm • Revolverová hlava: 12 pozic Csdpfxeyaln Eo Afnspw • Výbava: dopravník třísek / podavač tyčí: Top Automazioni model Magie

Stanje: rabljeno, Leto izdelave: 2004, Overview This cold glue labelling machine was manufactured in 2004 by the German company KHS. The machine remained in operation until January 2025 and is now stored at the company premises. The labeller is equipped with a camera system for precise alignment of neck labels on swing-top bottles. Technical Data Capacity: Up to 26,000 bottles per hour Operating direction: Counter-clockwise Formats supported: - 330 ml longneck glass bottles - 330 ml Steinie glass bottles - 330 ml swing-top glass bottles Cpodpowhwwvjfx Afnsw - 500 ml NRW glass bottles Label positions: - Front (up to 2 labels) - Back (up to 1 label) Equipped with Siemens S7 PLC New HMI touch panel in 2019

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Cpedpfx Aeu Nigkofnjw Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Ročna krožna žaga za lahke kovine Metallkraft LMS 400 - Deluje - Leto izdelave 2007 - Rezervni žagin list priložen Cpjdpfx Afsx Tz R Djnow - Možen preizkus pod napetostjo na lokaciji - Dostava preko špediterja za doplačilo - Nakladanje na lokaciji z viličarjem - Račun z DDV

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 350 mm Cutting diameter: 115 mm Cutting range at 90 degrees: flat 200 x 80 mm Speed: 1700/3400 rpm Saw blade size: 350 x 3.3 x 40 mm Motor: 400 Volt Total power requirement: 1.8 / 2.6 kW Cpsdpfxexabw Uj Afnsw Weight: approx. 600 kg Dimensions (L x W x H): 1000 x 850 x 1500 mm - In tested condition - machine video - ?v=k-VA1e8rSJI Features: - Semi-automatic aluminium circular saw - Pneumatic material clamping - Infinitely variable adjustment of saw head lowering speed - Machine table with mitre adjustment - Machine base

Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 1991, Bar diameter: 65 mm Maximum bar length: 3000 mm Operating voltage: 400 V Machine weight: approx. 1.2 t Space requirement: approx. 5.32 x 0.95 x 1.52 m Bar diameter range: 5 - 65 mm Feed force, infinitely adjustable: max. 550 N Insertion speed: 335 mm/sec Cpodpfxshuf Stj Afnjw Feed speed: 335 mm/sec Return speed: 335 mm/sec Loading time for 3000 mm bars: 30 sec.

Leto izdelave: 1967, stanje: rabljeno, številka stroja/vozila: 9317, Saw blade Ø: 275 mm Cutting range at 90°: 120 x 75 mm Cutting range at 45°: 90 x 65 mm Saw blade speed: 2,000 rpm Drive motor: 380 V, 1.1 kW Cjdpfeb N Eicsx Afnepw Space requirement: 700 x 900 x 1,000 mm

Leto izdelave: 1999, stanje: rabljeno, Premer žaginega lista: 300 mm Ročna vpenjalna naprava za material Naprava za minimalno pršenje 120 kg Cpedpfxjw Im Tre Afnow

Leto izdelave: 2000, stanje: rabljeno, Max. saw blade diameter: 350 mm Pneumatic material clamps Cpedpfx Aew Ddztefnsw Micro-spraying device Saw table swivels in both directions

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1971, Funkcionalnost: nepreverjeno, skupna masa: 150 kg, največja hitrost vrtenja: 2.800 obr/min, širina brusilnega kolesa: 30 mm, premer brusilnega koluta: 180 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Hitrost vrtenja: 2.800 vrt/min Premer brusnega koluta: 180 mm Širina brusnega koluta: 30 mm PODATKI O STROJU Obratovalna napetost: 220/380 V Frekvenca: 50 Hz Priključna moč: 0,8 kW Csdpfx Afsyn E Izonepw Dimenzije in teža Dimenzije (D x Š x V): 540 x 500 x 1.500 mm Teža: 150 kg Zunanja referenca: Pieper - Lot 69

Stanje: rabljeno, številka stroja/vozila: 423. 1245102, 4-kratni flyer z obračalno prečko Debelina žice 0,05 do 1,0 mm ø Cpedpfx Afeylzlkonsw 2-kratni flyer z obračalno prečko Premer navitja 90 mm, širina navijanja 120 mm Žica maks. 1,0 mm ø

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Offered is an SLM280 2.0 Single 700W, year 2022, approx. 5350 operating hours, SLM MCS control, build volume X/Y/Z: 280 mm/280 mm/365 mm minus substrate plate thickness, 3D optics configuration: single (single/double) 400W/700W, dual 400W/700W IPG fiber laser, build speed: 113 cm³/h, layer thickness: 20μm-90μm, structure size: 150μm, beam focus diameter: 80μm-115μm, max. scan speed: 10 m/s, process inert gas consumption: 5 l/min (argon), purge inert gas consumption: 110 l/min (argon). Accessories: HRS050 L/W cooling package, PSM100 V3 sieving station, BPH280 handling device, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully maintained annually by SLM Solutions (service reports available). Available from 01.12.2025, machine dimensions X/Y/Z: 2600 mm/1200 mm/2700 mm. Inspection possible by arrangement. Cpedjxy R Ezepfx Afnow

Stanje: dober (rabljeno), Lodret, isoleret rustfrit ståltank Udvendige mål: Diameter Ø 3200/3450 mm, totalhøjde 6000 mm. Cjdpfx Afjvdcmionopw Cylinderhøjde: 5000 mm. Lodrette, isolerede tanke i rustfrit stål – 2 stk. Årgang: 1986. Fabrikat: Wedholms, Sverige. Flad skrånende bund med 3" udløb. Konisk top med ventilation / CIP-tilslutning. Mandhul nederst på cylindrets side. Sidemonteret omrører. Materiale: AISI 304.

Stanje: rabljeno, Leto izdelave: 2022, Čistilni stroji Tip droga: Noben Baterija napetost: 12V Cpjdox Sa E Depfx Afnow Baterija kapaciteta: 85Ah Opis: Čistilna zmogljivost približno 1750 m²/h, hitrost 3,5 km/h, delovna širina 500 mm, širina sesalnega nastavka 730 mm, 1 okrogla polipropilenska krtača, rezervoar za čisto vodo 40 l, rezervoar za umazano vodo 45 l, 2 bateriji 24 V / 2 x 12 V, integriran polnilec, lastna teža 99 kg, mere: dolžina 821 mm, širina 576 mm, višina 1220 mm, nastavljiv ročaj.

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SLM Solutions Tip: SLM 280 Gradbeni prostor (D x Š x V): 365 x 280 x 280 mm (brez višine substratne plošče) 3D optična konfiguracija: Twin (2x 400 W) Spremenljiva debelina sloja: 20 µm - 90 µm Minimalna velikost strukture: 150 µm Premer fokusa: 80 µm - 115 µm Maks. hitrost skeniranja: 10 m/s Cedpfx Aeyqx R Iefnjpw Povprečna poraba zaščitnega plina med procesom: 16 l/min (argon) Povprečna poraba zaščitnega plina med polnjenjem: 250 l/min (argon) Sistem za zalogo prahu: 60–90 kg Električni priključek / Poraba: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5,5 kW Potreba po stisnjenem zraku / poraba: ISO 8573-1:2010 [1:4:1] 7 bar Dimenzije stroja (D x Š x V): 2500 mm x 2530 mm x 2620 mm Stroj je bil obratovan z aluminijem AlSi10Mg! Delovne ure laserja: 2200 h Stanje: zelo dobro stanje Obseg dobave: (glejte sliko) (Pridržane so spremembe in napake v tehničnih podatkih!) Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 100.000 l, Predmet: AV-12243-Wedholms-100m3 Zunanje mere: premer Ø 3800 mm, skupna višina 11000 mm. Vertikalni rezervoar iz nerjavečega jekla – 1 kos. Izoliran s 100 mm, zaključen z belo trapezno ploščo. Cpsdeyi E Htopfx Afnew Bočno nameščen mešalnik in CIP. Znamka: Wedholms Nerjaveče jeklo AISI 304

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, največja hitrost: 40 km/h, prva registracija: 08/2023, skupna masa: 17.500 kg, velikost sprednje pnevmatike: 550/45-22.5 14PR 154A5, velikost zadnje pnevmatike: 550/45-22.5 14PR 154A5, skupna višina: 3.300 mm, skupna dolžina: 7.580 mm, skupna širina: 2.550 mm, zunanji polmer: 9.900 mm, število osi: 2, Oprema: dodatne luči, osvetlitev, Atest for 40 km/h operation with mudguards is available; mudguards are included. Palms proprietary hydraulic system with a high-performance 130 cc piston pump permanently installed in the drawbar. Large oil tank with a capacity of 95 liters. Features a large Hultins Super Grip 420 S timber grapple. Equipped with a Palms forest crane FK 7.94, offering a reach of 9.9 m and a lifting capacity of 350 kg at maximum extension. The stated sales price is net, plus 19% VAT. Sale is exclusively to commercial customers, with warranty and liability for material defects excluded. Includes 2 LC6 mini joysticks for all crane functions and 2 LED work lights. Cjdpfx Afsx Hil Nsnepw