Horizontalne stroji za odvalno rezkanje zobnikov nakup rabljenega (30)

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, The perfect retrofit machine! Mechanically in exceptional condition! This machine can be inspected under power until 12.05.2026. After this date, it will be dismantled due to space constraints. Please find attached the current KLINGELNBERG measurement protocols available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in very good condition Functionality: Fully operational Inspection: Possible under power Technical specifications: - Rated workpiece diameter: 800 mm - Max. workpiece diameter: 800 mm - Max. workpiece diameter, special version: 1,200 mm - Rated module: 20 / 30 mm - Rated module, special version: 25 / 35 mm - Drive power: 35 kW - Drive power, special version: 52 kW - Cutter head speed range: 20 - 200 rpm - Cutter head speed range, special version: 26 - 265 rpm Fpolhcdsy Hfm Newvsh - Additional cutter head speed range, special version: 36 - 360 rpm - Swivel range of cutter head: +30 / -45 degrees - Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm - Center distance workpiece/tool, min./max.: 50 / 600 mm - Center distance workpiece/tool, special version: 50 / 800 mm - Max. axial slide travel: 700 mm - Max. axial slide travel, special version: 1,000 mm - Max. axial slide travel, special version: 1,300 mm - Lowest cutter head position above table: 450 mm - Table diameter: 800 mm - Table bore diameter: 245 mm - Table bore depth: 875 mm - Max. table speed: 15 rpm - Max. table load: 10,000 kg Machine dimensions: - Width A: 5,800 mm - Length B: 6,900 mm - Height C: 4,700 mm - Machine weight: 22,000 kg Regarding the values of the current KLINGELNBERG gear measurement reports before the grinding process: "Pitch and lead are unremarkable. In the profile, one measurement shows an fHα deviation at the limit or slightly outside the tolerance. Please check whether this value is permissible according to the drawing/customer approval or if correction or reworking is required. The gears have always been passed on to the RZ 1000 REISHAUER for grinding and were ground accordingly. Nevertheless, an overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Mikron A35, vključno z dodatno opremo, popolnoma funkcionalen. Fpelhcdwozcvxyjveh

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 130 mm Širina kolesa 180 mm Modul - maks. 2,5 Modul - min. 0,3 Hitrost vrtenja 140 - 900 vrt/min Število zob - min. 4 Največja vpenjalna dolžina 200 mm Krmiljenje Siemens Premer obdelovanca - maks. 80 mm Skupna potrebna moč 3,5 kW Fpelhsy Umizscdwvjh Teža stroja pribl. 2,9 t Potreben prostor pribl. 1,8 x 1,6 x 1,9 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Premer kolesa - maks. 130 mm Širina kolesa 400 mm Modul - maks. 3 Modul - min. 0,5 Krmiljenje Bosch CC 220 Hitrost rezkanja - brezstopenjsko 300 - 1200 obr/min Maks. vpenjalna dolžina 1160 mm Fpjlhcdjyb S R Ajwvsh Zasuk delovnega vretena +/- 45° X-hod 230 mm Y-hod 170 mm Z-hod 400 mm Hitrosti delovnega vretena 1 - 125 mm Skupna potrebna moč 52 kW Teža stroja pribl. 7,5 t Prostorske zahteve pribl. 4,8 x 3,8 x 2,5 m Stroj v zelo dobrem stanju!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Maksimalni delovni premer: 2100 mm Velikost mize: 1800 mm Minimalni premer: 200 mm Maksimalno število zob: 45 Maksimalni modul: 20 Teža: 40 ton Fpslhcoylprfodwvsh

Stanje: dober (rabljeno), Premer kolesa - max. 145 mm Širina kolesa 110 mm Modul - max. 2 Modul - min. 0,3 Fjlhcjy Ivdhodwveph Hitrost vrtenja 112 - 1000 obr/min Število zob - min. 6 Največja vpenjalna dolžina 150 mm Skupna potrebna moč 3,5 kW Teža stroja pribl. 1,3 t Potrebni prostor pribl. 1,3 x 0,8 x 1,4 m

Stanje: rabljeno, TEHNIČNI PODATKI - Premer obdelovanca: 100 [mm] - Nazivni modul * Obruševanje zobnikov: pribl. 3,0 [mm] * Obruševanje polžev: pribl. 5,0 [mm] - Največji pomik po osi: 320 [mm] - Usmerjanje notranje rezkalne glave: -45 / +115 [°] - Največji premer valjastega rezkalnika: 118 [mm] - Največja obdelana dolžina valjastega rezkalnika: 180 [mm] - Največji pomik rezkalnika (premik): 160 [mm] - Največja hitrost vretena držala obdelovanca: 3000 [obr/min] - Min/Max. razdalja med osmi: 10/100 [mm] - Moč motorja notranje rezkalne glave: 14 [kW] - Hitrost valjastega rezkalnika: 50–12.000 [obr/min] - Teža: 5000 [kg] OPREMA - Siemens 840D krmilnik Felhcdjx Ed A Rowvjph - Rezervoar za hladilno sredstvo - Transporter za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Stroj za zobniško in rotorno rezkanje Fslhcdwezbt Iisvsph

Stanje: rabljeno, TEHNIČNI PODATKI - Maks. premer obdelovanca: 80 [mm] Fpelhcdwjyuzggevjh - Z-pomik: 220 [mm] - Maks. modul: 2,5 - Maks. hitrost vretena nosilca obdelovanca: 3000 [vrt/min] - Maks. dimenzije valjčne rezkalke (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkalke: 200-5000 [vrt/min] - Preklopni hod: 140 [mm] - Kotni pomiki rezkalne glave: -45/+115 [stopinj] - Potreben prostor: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmiljenje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, TEHNIČNI PODATKI Felhcdwoyuzgasvjph - Največji premer obdelovanca: 80 [mm] - Z-premik: 220 [mm] - Največji modul: 2,5 - Največja hitrost vretena nosilca obdelovanca: 3000 [obr/min] - Največje dimenzije valjčne rezkarice (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkarja: 200–5000 [obr/min] - Premik za preklop: 140 [mm] - Kotni premiki rezkalne glave: -45/+115 [stopinj] - Potrebna površina: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmilje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 090200220, Oprema: dokumentacija / priročnik, Prodaja zaradi prenehanja dejavnosti – NUJNO Zelo lep, redek in kakovosten stroj v delujočem stanju. Rezkalka za obdelave visoke natančnosti, z veliko točnostjo in zanesljivostjo. Omogoča rezkanje ravnih in spiralnih zobnikov. Ravni zobniki premera od 0 do 120 mm. Ravni zobniki premera od 120 do 200 mm. Glejte fotografijo tehničnega lista. Dokumentacija priložena k stroju: Originalni uporabniški priročnik: 150 strani Predavanja zastopnika Mikron (25. februar – 1. marec 1963) Tehnični list na zahtevo, prav tako seznam razpoložljivih rezkal: Mikron (12), L. Carpano (23), K. Schnyder-ks (27), Piltz (4) (PDF). V: 1,515 m Felhjy Iqkpocdwvoph Š: 0,97 m G: 0,526 m Trofazni Teža stroja: 680 kg Osebni prevzem, iznos v breme kupca.

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Fpolhevzhf Sscdwvjh Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: dober (rabljeno), Opis: Fpolhjy Amiqjcdwvsh Stroj je v dobrem tehničnem stanju, možnost preizkusa po predhodnem dogovoru. Uporaba: proizvodnja zobnikov (čelnih, poševnih, osi). KAPACITETA maks. premer zobnika: ≈ 400 mm maks. modul: običajno 6–8 (včasih do 10 pri novejših verzijah) maks. širina zobnika: približno 275–400 mm VRETENO IN ORODJE obrati rezkarja: do ~500 vrt/min premer orodja: približno 160–240 mm moč motorja: približno 15–17 kW MIZA premer mize: ≈ 380–400 mm odprtina v mizi: približno 80 mm obremenitev: do ~1000 kg DIMENZIJE IN TEŽA dolžina: ~4680 mm širina: ~2395 mm višina: ~2515 mm teža: približno 5–6,5 t (klasična različica)

Stanje: novo, Maximaler Bearbeitungsdurchmesser: 200 mm Maximale Bearbeitungslänge: 2.300 mm Fpolhcjy N Rbdjdwveh Spitzenweite: 2.500 mm Anzahl der bearbeiteten Passfedernuten: 4–50 Anzahl der Frässpindeldrehzahlen: 6 Bereich der Frässpindeldrehzahl: 50–160 U/min Anzahl der Vorschubstufen: 12 Vorschubbereich: 0,41–2,97 mm Werkstück/Umdrehung Abstand zwischen Werkstückmitte und Fräsermitte: 50–165 mm Maximaler montierbarer Fräserdurchmesser: 130 mm Maximale montierbare Fräserlänge: 110 mm Aufnahmedurchmesser des Fräserschafts: 22 / 27 / 32 mm Kegel im Frässpindel-Aufnahmebohrung: Morse 4 Axialhub der Frässpindel: 40 mm Kegel im Reitstockbüchsenbohrung: Morse 5 Maximaler Hub der Reitstockhülse: 60 mm Handradvorschub Fräskopf pro Umdrehung: 0,02 mm Handradvorschub Fräskopf pro Kreis: 2,5 mm Schnellvorschub des Schlittens: 2,24 m/min Hauptmotorleistung: 4,0 kW Drehzahl: 950 U/min Schnelllaufmotorleistung: 1,1 kW Drehzahl: 940 U/min Kühlmittelpumpenleistung: 0,15 kW Drehzahl: 2700 U/min Schmiermittelpumpenleistung: 0,15 kW Drehzahl: 2700 U/min Aufstellmaße der Maschine (LxBxH): 4.225 × 1.607 × 1.640 mm Gesamtgewicht der Maschine: 6.800 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, Workpiece diameter: 40 mm Module - max.: 2 Module - min.: 0.1 Max. workpiece length: 665 mm Weight: 4.5 t Spindle bore diameter: 82.5 mm Control: Siemens Total connected load: 5.5 kW Fslhcev Ucdvjdwvoph Technical Specifications: Max. module: 2 Pitch: 0.5 - 25 mm Multiple leads Max. workpiece dia.: 40 mm Max. workpiece length: 180 mm Max. cutter diameter: 80 mm Max. cutter width: 12 mm Z-axis (milling length with tailstock): 90 mm Z-axis (milling length without tailstock): 113 mm Swivel angle milling head: 30° / 30° Description: Gear hobbing and thread cutting machine LAMBERT - 124 CNC The machine is in well-maintained condition.

Stanje: dober (rabljeno), Leto izdelave: 1991, Machine weight approx. 6 t Fpslhcdweub Amfjvjh The design of the base machine is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece is mounted between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive range of accessories Technical data: - Maximum module for gear hobbing cutters according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece diameter for manual loading: 200 mm - Max. workpiece diameter for automatic loading: 150 mm - Maximum workpiece length: 400 mm - Largest / smallest cutter diameter: 102 / 40 mm - Maximum cutter length: 230 mm - Largest / smallest cutter arbor diameter (standard): 32 / 16 mm - Axial slide travel = maximum milling length Z-axis: 300 mm - Radial slide travel X-axis: 140 mm - Shift slide travel (shift movement) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swiveling angle of shift milling head (left/right) A-axis: 50° / 60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm (*assuming '1ß0' is a typo for 100) - Y-axis (front face of milling spindle): 50 - 230 mm - W-axis (front face of tailstock spindle): 165 - 585 mm - Cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Stanje: dober (rabljeno), Leto izdelave: 1974, skupna dolžina: 2.000 mm, skupna višina: 1.430 mm, skupna širina: 1.600 mm, dolžina rezkanja: 135 mm, največja hitrost vretena: 1.120 obr/min, hitrost vretena (min.): 140 obr/min, skupna masa: 1.420 kg, premer orodja: 150 mm, Stroj za valjčno rezkanje zobnikov, največji premer orodja 150 mm, največja dolžina rezkanja 135 mm, največji modul 2, motor 2,2 kW, s hidravlično enoto, menjalna kolesa, različna rezkalna orodja, navodila za uporabo. Fslhcoyzqryedwvsph

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Fpolhcdwjvz Ec Iovoh Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 - Documentation

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Premer kolesa - max.: 80/120 mm Modul - max.: 2,5 Največji dovoljeni premer glave: 65 mm Najmanjši dovoljeni premer rezkalnega trna: 22 mm Največja zobljena dolžina: 140 mm Največja dolžina: 120 mm Pomik sani aksialno (Z-os): 320/400 mm Mere (dolžina/širina/višina): 3270 x 3240 x 2020 mm Teža stroja pribl.: 6 t P60 – Kompaktni vsestranski stroj za zobnike, osi in polže Fpolhsxrwpkecdwvoh P60 je najmanjši model v seriji Gleasonovih horizontalnih navojnih rezkalnih strojev. Ta vsestranski stroj ne reže le cilindričnih zobnikov z vsemi vrstami profilov, temveč je tudi optimalna rešitev za strojno obdelavo volanskih zobnikov in polžev. Z avtomatskim sistemom za nalaganje, izsesovalno napravo, transporterjem ostružkov, z uravnoteževalno napravo in 2 konjički, s sistemom za nadzor procesa Artec, tip CTM-BT1.1

Stanje: pripravljen za uporabo (rabljen), Horizontalni rezkar za zobnike s matrično rezkalno glavo Precimo model HR 3-ND-15, največji premer obdelovanca 250 mm, največji modul 7, največji premer za modul 7 je 135 mm, največji premer 250 mm za modul 5, največja dolžina rezkanja 335 mm, najmanjše število zob, ki jih je mogoče izdelati, z6, največja razdalja med točkami 735 mm, največja hitrost rezkarja 435 vrt/min, ocenjena teža 3500 kg. Fjlhcdwjy Swl Ujvjph

Stanje: rabljeno, Leto izdelave: 2000, Technical details: Wheel diameter - max.: 180 mm Wheel width: * mm Module - max.: 4 Total power requirement: 14 kW Machine weight approx.: 8 t Slide travel axial (Z-axis): 300 mm Fslsyk Ur Ujhcdwvjph Shaft length - max.: 490-640 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 12.000 kg, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 1.080 mm, premer mize: 1.200 mm, hitrost pomika os X: 3 m/min, hitrost podajanja osi Y: 500 m/min, hitrost podajanja os Z: 3 m/min, vhodni tok: 195 A, premer obdelovanca (maks.): 1.600 mm, dolžina vretena za rezkanje: 450 mm, namizna vrtalna stiskalnica: 400 mm, hitrost vretena (min.): 250 obr/min, skupna masa: 51.000 kg, moč: 115 kW (156,36 KM), Oprema: dokumentacija / priročnik, Liebherr high-performance gear hobbing machine LC1502 in good condition Control: Liebherr LH90 V4, drives by Bosch Rexroth Folhcswqm A Todwvsph Comprehensive accessories included such as BHG, coolant unit for lubrication and coolant, fume extraction, cutter arbors, various software packages/limit extensions, and complete documentation. We can also assist with installation and commissioning right up to production, according to your needs!

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Folhst Hw D Rscdwvoph Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Fpeljt Hw R Dehcdwvjh Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Folhcot Hwxbedwveph Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories