Mep Tiger 350 Ax nakup rabljenega (118)

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. Rcodpfx Ahecgbq Ijueh – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 22177, Article number MA1154 Redjirud Dspfx Ahujch Manufacturer Mep Model Cobra 350 MA Year of manufacture 1990 Machine No. 22177 Length [mm] 1100 Width [mm] 1000 Height [mm] 1800 Weight [kg] 350 Connected load 380 V Saw blade diameter 350 mm Features Mitre cut 45 degrees

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Rcedpfxjtt Nd Rs Ahush Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Leto izdelave: 2003, Stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Redpjra Rrlsfx Ahujch Machine weight: approx. 1050 kg

Stanje: rabljeno, Radial fan, chip extraction blower, fan, extraction unit, dust extraction system, chip blower, extraction system - Manufacturer: MEP, extraction unit with transport frame Rcjdpfjh Szarox Ahuoh - Type: unfortunately without type designation - Motor: Cantoni 0.75 kW / 2840 rpm - Base: on castors - Dimensions: 950/480/H1860 mm - Weight: 40 kg

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left Rodpfxeppgddj Ahusch CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade

Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 375 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description: - Saw bow, vise unit, and base made from robust cast iron - Precision angle indicator integrated into the cast iron frame Rodpfx Aocgbp Ishusch - Electrical system (with fully identifiable wiring and low-voltage system 24 V) - IP 55 selector handle for manual operation (where applicable) - Rotating chip brush for the saw blade - Quick-closing device with vise for rapid approach - Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts list in the user’s language - SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed - CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines - Quick-set vise - Hydraulic converter for blade tension display - Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame - MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item Number SH281SXI Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 435 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description Semi-automatic function: The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically. Key Features: - New, centralized control panel mounted on an articulating arm - Latest generation hydraulic control unit, highly efficient with low energy consumption - Base frame with removable coolant tank The machine complies fully with all CE regulations! Please refer to the attached PDF document for further technical specifications.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, For sale is a used, fully functional semi-automatic mitre band saw machine. Rsdswigavspfx Ahusch Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Maximum vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Saw blade motor power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Stanje: dober (rabljeno), Leto izdelave: 2021, MEP AVT400 zamaškovalni stroj Serijska številka: 271221 Leto: 2021, inox (nerjaveče jeklo) zamaškovalec, robusten in enostaven za uporabo. Primeren za nameščanje ROPP in navojnih zamaškov na steklenice z navojnim vratom. Maksimalni premer steklenice: 195 mm, maksimalna višina steklenice: 355 mm, do 400–600 steklenic na uro. Mobilna izvedba, 1-fazni priklop. Rodpfx Aou S Rk Hjhujch

Stanje: rabljeno, MEP 40 Straightening and Cutting Bench Number of bars: - 1 x Ø 40 mm Rsdpfovtx Eyjx Ahuoch - 2 x Ø 32 mm - 3 x Ø 26 mm - 4 x Ø 20 mm - 5 x Ø 16 mm Yield strength Fy= 600 N/mm² - Tensile strength ft= 650 N/mm² Minimum cutting length: 800 mm Maximum cutting length: 12,000 mm Measuring tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measuring evacuation speed: 2.2 m/s Number of compartments: 5 + 5

Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, steplessly adjustable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description Rcedpfx Aechhdiohujh Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw blade length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10m) Simple touchscreen operation Saw arm made from spheroidal graphite iron – robust and stable Space requirement: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep For further technical data, please refer to the attached PDF document.

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Rjdpfjchhfujx Ahujch Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: novo, Motor power: 1.1/2.2 kW Vice opening: 130 mm Blade dimensions: 350x32x2.5 Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 mm Cutting capacity at 45° right: 100 / 85 / 90x80 mm Cutting capacity at 45° left: 75 / 75 / 90x65 mm Cutting capacity at 60° right: — Cutting capacity at 60° left: — Description Manual mitre chop saw for miter cuts from 45° right to 45° left, offering high cutting performance. Rsdpfjcgrkyjx Ahuoch Constructed from robust cast iron, practical and safe for every cut. FALCON 352 is available as a bench model or with a stand (optional accessory). The machine comes equipped with a two-speed three-phase motor. On request, a pneumatic vice is available (FALCON 352 MA, the vice automatically closes when lowering the head). This version is always supplied with a stand. Standard equipment: - Externally adjustable clutch - Locking device with vice - Slideable on prismatic guide with adjustable rail - Fixed vice jaws with axial adjustment for clamping the workpiece directly at the cutting line - Adjustable chip removal bracket, fully manufactured from steel - 48 V electric coolant pump for blade cooling and lubrication - Double return spring for securing the loading platform - Machine can be hoisted - Worm shaft mounted on bearing pair - Saw blade spindle mounted on offset shaft - Two speeds: 30 and 60 rpm - Vice opening 130 mm - Machine is supplied without saw blade. Electrical equipment: - Electrical control panel - Labeled cable connections - Main safety switch prepared for padlock - Emergency stop device - Phase failure protection - Speed selector switch - Thermomagnetic protection - Undervoltage release - Motor with protection class IP 54 - Low voltage circuit 24 V - Electric coolant pump 48 V - Motor 1.1/2.2 kW – 400 Volt For further technical specifications, please refer to the attached PDF document.

Stanje: novo, MEP COBRA 352 SX evo [Semi-Automatic] Article number: CB352SX Motor power: 1.5/2.2 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 mm Weight: 285 kg Speed: 1700 / 3400 rpm Cutting capacity at 0°: 120 / 105 / 180x70 mm Cutting capacity at 45° right: 120 / 100 / 135x60 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Semi-automatic circular saw designed for cutting solid and hollow aluminium materials and light metal alloys using an electro-welded carbide-tipped blade. Standard features: - Machine suitable for mitre cuts from 45° right to 45° left. - The vertical alignment allows for cutting operations with the head tilted between 0° and 45° to the left. - *MEP offers the latest generation of microprocessor-based controls designed for semi-automatic machines with single-axis control. - FEATURES: At cycle start: – the vice closes and the motor starts – the saw head lowers for cutting – the motor stops – the saw head lifts – the vice opens. - New – Display with 16 characters x 2 lines showing the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Display of over 100 diagnostic notifications and warnings - New – Indication and logging of alarms and error messages with the ability to review incidents that occurred. Electrical equipment: - New – Low-voltage switch panel: polyester membrane keyboard with thermoformed and raised buttons and activation control signal. Rodpfechkv Isx Ahuech - Saw bow stroke fully programmable from the control panel to be adapted to the workpiece. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system using two face-mounted vices, which can be positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for quick head positioning at 0° and 45° right and left. - Chip conveyor ready for OPTIONAL extraction system. - Automatic blade lubrication system, only active at the beginning of the cut. - Machine is supplied without saw blade. - Prepared for installation of the optional minimum-quantity lubrication system for the saw blade, in addition to the standard emulsified oil lubrication system. - Supplied with tools and instruction manual including spare parts list. For further technical data, please refer to the attached PDF document. Catalogue page 2!

Stanje: novo, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number: CB352NC 5.0 Motor Power: 2.6 / 3.5 kW Vice Opening: 180 mm Blade Dimensions: 350x32x3.4 Weight: 600 kg Speed: 1700 / 3400 rpm Cutting Capacity 0°: 120 / 105 / 180x70 mm Cutting Capacity 45° right: 120 / 100 / 135x60 mm Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: Automatic cross-cut saw with semi-automatic functions for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left; saw head swivels 0°-45° to the left. Control is managed via multi-microprocessors, while two NC-controlled axes allow programming of up to 1,000 different cutting programs (each with different quantities and lengths), for the same material batch. - New centralized control console mounted on a swivel arm, allowing easy operation from any working position and ensuring the emergency stop switch is always accessible. - Fieldbus communication system with dual microprocessor and serial interface. - Display (20 characters x 4 lines) shows the following technical parameters: number of programmed cuts and completed cuts, blade thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings. Rsdpschkwhsfx Ahusch - New: Display and logging of alarm and error messages, with the ability to review logged incidents. Now with 600 mm material feed using a ball screw spindle driven by a cutting motor, mounted on opposing ball bearings. - New: Low-voltage control panel—polyester membrane keypad with thermoformed, raised buttons and actuation signal. - Saw bow stroke height programmable directly from the control panel for adaptation to different cutting materials. - Ball-bearing-mounted rotary table ensures easy and precise rotation. - Clamping system with two end-positioned vices, freely positionable along the longitudinal axis of the workpiece. - Adjustable mechanical stops for rapid positioning of the saw head at 0 and 45 degrees to the left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalogue excerpt).

Stanje: novo, MEP COBRA 352 MA Article number CB352MA Motor Power 2.2 kW Bench Opening 180 mm Blade Dimensions 350x32x3.4 mm Weight 210 kg Speed 1700/3400 rpm Rcodpfxjchku Sj Ahuoh Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left --- Cutting Capacity 60° right --- Cutting Capacity 60° left --- Description Manual circular saw for cutting aluminium; mitre cuts from 45° right to 45° left; saw head swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. Standard Equipment: - Roller-mounted turntable for quick and precise mitre adjustment - Locking system to secure the saw head at any angle - Automatic blade lubrication - Clamping system consisting of two vices - Saw head lock in upper position - Adjustable length stop for repeat cuts - Vice opening 180 mm - Includes tools and operator’s manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operations-ready indicator lamp - Main safety switch - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle with protection class IP 55 - Low voltage circuit 24 Volt - Motor 1.5/2.2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display Redpfx Ascgbt Rshuech - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, MEP SHARK 382-1 SXI EVO Metal Bandsaw Hydraulic Semi-Automatic. MEP Authorized Dealer – please send us your inquiry Motor power: 1.5 / 1.8 kW Jaw opening: 385 mm Blade dimensions: 3770 x 27 x 0.9 mm Weight: 695 kg Blade speed: 40/80 m/min Cutting capacity at 0°: 300 / 250x250 / 380x250 mm Cutting capacity at 45° right: 260 / 250x250 / 300x200 mm Cutting capacity at 45° left: 240 / 210x210 / 280x160 mm Cutting capacity at 60° right: 180 / 170x170 / 200x170 mm Cutting capacity at 60° left: Description Electro-hydraulic, semi-automatic bandsaw, featuring both manual and semi-automatic-dynamic operation, suitable for cutting from 45° right to 60° left. Key features: - Pivoting control panel on vertical support column - 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts - Two blade speeds (40/80 m/min) Rjdpfx Aeg Hzxijhujch