Mep Ph 211 nakup rabljenega (146)

Stanje: novo, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 - 100 m/min Total connected load: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steel, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cutting cross-section: 230 x 230 mm. - Numerically controlled bandsaw with a new Windows “CE” based IGE system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters. - Safety enclosure in compliance with the latest Machinery Directive EN 13898/2007 safety standards. Fpodpfjfg E Hysx Aprsk - New fieldbus communication system with dual microprocessor and serial interface. - Robust cast iron construction (G25) to compensate for vibrations, increase machine stability, and extend the service life of the saw blade.

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Fodpfx Apsfg E H Eerepk Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and 24 V low voltage system) Fpedofg E H Iepfx Aprek Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 350 mm, skupna masa: 480 kg, vrtljajska hitrost (min.): 15 obr/min, največja hitrost vrtenja: 90 obr/min, vhodna napetost: 380 V, 3-fazni motor 400V, z dvema hitrostma, deluje brezhibno! Glava z zobniki in 4 hitrostmi. 15, 30, 45 in 90 vrt/min. Hitro vpenjanje. Popolnoma nove originalne vpenjalne čeljusti MEP. Nujna zaustavitev (E-Stop). Črpalka za hladilno tekočino v osnovi stroja. Možni poševni rezi. Kvadratna zmogljivost: 95x95 mm Največja zmogljivost žaginega lista: 350 mm Vključuje 2 žagini listi 350 mm. Izdelano v Italiji. Teža: 480 kg. Za možnosti dostave nas kontaktirajte! Fpedpezawmysfx Aprjk € 2.000,00

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise opening: 335 mm Fodpjxabavefx Aprjpk Band speed: 15 – 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Controller: MEP CNC Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic band saw, with additional: * semi-automatic operation * semi-automatic dynamic operation * manual operation Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL design) * MEP - WINDOWS numerical control unit * 7” user interface with touch screen display * Mechanical buttons for the main operating functions * Ensures reliable operation, simple and intuitive use * Real-time monitoring of all cutting parameters * Swivelling arm for convenient and safe operation * Display and entry of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For non-programmed cutting operations - Safety enclosure to protect the operator - Infinitely variable cutting speed from 15 to 100 m/min * via frequency inverter - Latest generation hydraulic unit * Highly efficient with minimal energy consumption - Material feed via stepper motor and precision ball screw * Mounted with counter bearings * Single stroke 600 mm, repeatable for any length - Saw head positioning and feeder movement via joystick - Automatic detection of start-of-cut position - Manual blade tension control with display indication * via electronic converter - Automatic cutting force monitoring * Via servo valve mounted directly on the cylinder - Integral coolant tray in base frame - Chip removal brush - Bi-metal band saw blade for solid and profile materials - Tools and operation manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed Manufacturer's note – please note: When installing this saw on a circuit with a residual current device (RCD/ELCB), this must be all-current sensitive (Type B) and not less than 300 mA.

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Fodpfx Aexaa Ewsprepk Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Equipment/features: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – controller and 7” touch-screen display * Simple and fast adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm length - Material feed via stepper motor and ball screw spindle * Single stroke 600 mm, repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, indicated in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Saw blade tension with tension monitoring and display - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * With exchangeable clamping and stop jaws - Large, side-removable chip tray and coolant tank * With 2 electric pumps for blade lubrication and cooling * Coolant gun for machine cleaning - Chip removal brush for blade cleaning - Operating manual in German Manufacturer note - please note: When installing this saw in a network with residual-current circuit breaker (RCD) it must be all-current sensitive (TYPE B) and not less than 300 mA.

Stanje: rabljeno, MEP 40 Straightening and Cutting Bench Number of bars: - 1 x Ø 40 mm - 2 x Ø 32 mm - 3 x Ø 26 mm Fsdpfevtx Eyex Aprepk - 4 x Ø 20 mm - 5 x Ø 16 mm Yield strength Fy= 600 N/mm² - Tensile strength ft= 650 N/mm² Minimum cutting length: 800 mm Maximum cutting length: 12,000 mm Measuring tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measuring evacuation speed: 2.2 m/s Number of compartments: 5 + 5

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° - Saw head tilt adjustment for compound cuts to the left Fedswq N Swepfx Aprjpk - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm - Weight approx.: 180 kg

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 080024-38 U, Offer 23332 Technical Specifications: Fpjdpfxjp Ebn So Aprek - Saw blade dimensions: 250 x 2 x 40 mm - Saw blade spindle speed: 52 rpm - Cutting capacity at 90° round: 80 mm flat: 95 x 60 mm - Mitre adjustable up to: 45° - Material vice - Drive: 400 V / 0.5 kW - Space requirement approx.: W 650 x H 1500 x D 750 mm - Weight approx.: 100 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318 Tehnični podatki: - Ročni tračni žagalni stroj - Dimenzija žaginega traku: 2375 x 20 x 0,9 mm - 2 hitrosti rezanja: N 33 / 66 o/min - Največja vpenjalna zmogljivost: 205 mm - Nastavljiv kot rezanja levo + desno: 30° - Rezni razpon: - 90° okroglo: 160 mm - 90° kvadratno: 160 mm - 90° ploščato: 200 x 100 mm - 45° levo + desno okroglo: 140 mm - 45° ploščato: 140 x 60 mm - Pogon: 400 V / 1,5 / 1,8 kW - Opremljenost s hladilnim sredstvom - Odvodni valjčni transporter z omejevalom: 3000 mm - Dovodni valjčni transporter: 1500 mm Fpsdpfx Apexta N Aorok - Teža: pribl. 350 kg - Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm

Leto izdelave: 2001, stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm - Multiple stroke Fpsdpfx Apod Aai Torsk - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Premer reza 250 mm Dolžina tračnega lista 2950x27x0,9 mm Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR Fpsdpfxefg E H Ne Aprek (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible. Fpsdpfx Aouwrv Deprjk

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm Fpsdpfx Apofg E H Dorjk • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs Fodpfxefm T Hbe Aprjpk • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Fpsdpfsfg E Hzsx Aprek Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: dober (rabljeno), Leto izdelave: 2004, Tračna žaga v dobrem stanju + 2 dodatna nova žagalna traka Fpsdjy Txb Topfx Aprsk

Leto izdelave: 2001, stanje: rabljeno, Maks. premer žaginega lista: 350 mm Fjdoygin Nepfx Aprjpk Pnevmatske objemke za material Miza vrtljiva levo in desno Ročni podajnik

Stanje: dober (rabljeno), Leto izdelave: 1998, premer žaginega lista: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was manufactured in 1998 but is in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Fpsdpfov Tlcrox Aprek Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Cutting capacity: Suitable for round stock, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cutting in both directions Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant supply: Integrated cooling system ensuring better cutting quality and extended saw blade life

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120 mm Cutting capacity at 45 degrees (square): 100 mm Fpjdpfx Asfc T Ufeprok Cutting capacity at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, with mitre cuts from 45° right to 45° left and a saw head tiltable from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when lowering the saw head. • Roller-mounted turntable for fast and precise mitre adjustment • Screw lock to fix the saw head at any angle position • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in upper position • Adjustable length stop for repeat cuts of identical length • Vice opening: 180 mm

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Fpodsfg E H Ujpfx Aprjk Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90°: round 115 mm Fsdpfx Aofmck Hjprepk Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 130 x 80 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 85 mm Cutting capacity at 60°: flat 90 x 80 mm Clamping range: 130 mm Speed: 30 / 60 rpm Saw blade dimensions: 350 x 32 x 2.5 mm Total power requirement: 1.1 / 2.2 kW Machine weight: approx. 0.22 t Space requirement: approx. 1200 x 860 x 900 mm Special offer 2026 including base frame! Manual cross-cut saw for miter cuts from 45° left to 45° right. Steel worm gear, double ball bearing mounted Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with key and tapered clutch to ensure maximum power transmission to the steel worm gear Vise with adjustable guide rails Adjustable burr-free cutting device (enables burr-free cutting) Length stop Double return springs Main safety switch Emergency stop button Speed selector switch Electric coolant pump for lubrication and cooling of the saw blade (optionally possible to install micro-spray device) Motor 1.5/1.8 kW - 400 Volt

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Fpjdpfsfg E Iaox Aprsk Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Fpjdsfg E H Rspfx Aprjk Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Fedofg E H Tepfx Aprepk Bimetal saw band for solid and profile material. Tool kit and operating instructions included.