Homag Bof 211 nakup rabljenega (487)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Fsdpfx Ashvi E Ijflsft Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Homag SAWTEQ B-130 Optimat / HPP130/38/38 Optimat Dolžina reza: 3800 mm Ffedpfox Na Awjx Afljt Globina potiskača: 3800 mm Izvleček žaginega lista: 65 mm, hitrost vozička žage do 60 m/min Hitrost potiskača: do 25 m/min Glavni motor žage: 5,5 kW Premer glavnega žaginega lista: 300 mm Krmiljenje: programska oprema CADMATIC 5.0

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 9.400 mm, skupna masa: 4.000 kg, Stepless feed adjustable from 18 - 24 m/min For edge material from the roll or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber pad Workpiece support – scissor type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with 2 driven, angled rollers Processing units: Jointing milling unit with 2 motors, each 3 kW Gluing unit A20 End trimming unit HL83 bevel/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Profile milling unit FK 8-fold automatic with 2 motors, each 0.55 kW Multi finishing unit MN automatic Finishing unit for glue joint Buffing unit top and bottom with oscillation Chip conveyor belt Electronic frequency inverter for machining units Ffedjw Sdlmepfx Afljt HOMATIC control with NC21 input unit Machine length 9500 mm. Machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 008016, Delovno območje os X: 3300 mm Delovno območje os Y: 1550 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 10 kW Število krmiljenih osi: 5 osi Ffodpfx Afsw Idhmolot Število vrtalnih vreten: 35 Število mest za orodja: 14

Stanje: zelo dobro (rabljeno), 4-axis CNC machining center for milling, drilling, cutting, and edge banding. Gooseneck machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 support/consoles (mm 1340) Fodpfjh Ucn Rex Afleft LEDs indicate the programmed positions of the vacuum clamps (Y-axis) Automatic tool changer (carousel-type, 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 2 working zones – 2 vacuum pumps (capacity 100 m³/h) Chip conveyor for removing waste from the machining process Total connected load: 27 kW Working units (top) 17 independent vertical drilling spindles (2.2 kW) 4 independent horizontal drilling spindles 1 vertical electrospindle HSK F63 (main spindle 11 kW) 1 groove saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), gluing unit (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Delovno območje X: 3050 mm Delovno območje Y: 850 mm Skupina za vertikalno vrtanje: 13 vreten Skupina za horizontalno vrtanje: 4 vretena v X, 2 vretena v Y Rezkalna žaga v osi X, premer 100 mm Rezkalno vreteno: 10 kW, vpenjanje HSK-F63, do 24.000 vrt./min. Izmenjevalec orodij s 4 pozicijami Fodpfx Aex Naz Hsfljft Krmiljenje: HOMAG powerTouch / woodWOP.

Stanje: zelo dobro (rabljeno), Rezkalna enota Ffsdpfjx Eyi Nex Aflot Žagalna enota Nastavljiv kot nagiba Nosilec orodja HSK63F

Stanje: rabljeno, številka stroja/vozila: 006374, Tip pritrjenega robu: tanek rob, debel rob Lepilni sistem: PUR Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Fsdpfol Txv Ejx Afleft Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kosov

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 Ffedpfep N D Ngox Aflst EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Horizontalna razrezovalka HOMAG HPP300/43/43 Profi Nalaganje s priseski izključeno Širina reza: 4300 mm Ffjdpox I Aycefx Aflot Dolžina reza: 4300 mm Maks. izpust glavnega rezila: 125 mm 8 vpenjalnih klešč

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with rolling block chain (instead of standard chain), upgraded mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Comprising of: Edgebander and formatting machine HOMAG, type: PROFI KFL350/13/A3/WZ Infeed station/loading table HOMAG POWER TBL100/30/30/S Return conveyor/BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Edgebanding with PUR and EVA adhesives. Ffodpfswvlhljx Aflet

Stanje: rabljeno, številka stroja/vozila: 006082, Maks. širina panela: 1300 mm Maks. dolžina panela: 3000 mm Rotacijski sistem: z dvojnim stožcem Fsdpfxjwaymwo Afloft Smer rotacije: iz prečne v vzdolžno smer

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts Fedpoivawpofx Afleft No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: rabljeno, številka stroja/vozila: 008169, Delovno območje os X: 4500 mm Delovno območje os Y: 1550 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 31 Ffedpfjxaud Iox Aflot Število mest za orodja: 22

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: Fedpfx Aonzhxqefloft A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: rabljeno, številka stroja/vozila: 007877, Maks. širina plošče: 1100 mm Maks. dolžina plošče: 2500 mm Povrat delov za robno lepilko: levo Ffodpfxjwkf Hqo Afljt

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 Fodev D U Urjpfx Afleft O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: rabljeno, številka stroja/vozila: 004592, Tip nalepljenega roba: tanek rob, močan rob, masivni les Sistemsko lepljenje: EVA Predfrezanje: da Multifunkcijska enota: da Maks. podajna hitrost: 24 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 8 kos. Ffjdpfx Afswcmxlelot

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm Fsdjwk Hp Tspfx Aflsft - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: rabljeno, številka stroja/vozila: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Fedju T Tt Tjpfx Afloft Max. panel stack height above floor: 2100 mm Lifting capacity: 250 kg Movement system: with suction elements

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min Fsdpfx Aolkbn Isfleft CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, laser Jointing cutters: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 units Ffjdpfxjg Iy Dus Aflst

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Fedpfjuhv R Dex Aflsft Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: rabljeno, številka stroja/vozila: 006252, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs Ffedpfxewcyckj Aflst

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Ffsdpfx Afsl Iz Tuslst Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10