Davčna kartica

Homag 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Kdodpfx Aoyqybujdksi Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction Kjdpfx Adsyqx U Hskjdi The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Kedpfsytr Hbox Adkedi Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: rabljeno, številka stroja/vozila: 008107, Položaj 2: Naprava za povrat plošč HOMAG + LIGMATECH-KAR 310/9/A20/S2 Kdjdpfjw U Rqzsx Adkji

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - └ Type of documentation: Technical data, electrical schematics, user manual, operating system - └ Language: NL - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - └ 1st unit type: - - Tools included: Yes - └ 3rd unit type: - - Tools included: Yes - └ 4th unit type: - - Tools included: Yes - └ 5th unit type: - - Tools included: Yes - └ 6th unit type: - - Tools included: Yes Kdedpex Ei Syjfx Adkoi - └ 7th unit type: - - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages [pcs.]: 4 Financial Information VAT: The indicated price is plus VAT. VAT/margin taxation: VAT deductible for businesses. Delivery and trade-in possible at any time for all items in the industrial sector. Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 0-200-24-6287, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain for workpiece feed, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable pressure beam - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off when feed stops Kdedpfx Adsyv Da Hokei - Glue roller clamping before workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronous/counter-rotation, 2x4kW, operation-controlled GLUING UNIT A20, comprising: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness from min. 0.4 mm to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) according to edge thickness, 1 powered and 6 non-powered pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable trimming stops - Pre-/flush trimming unit 1.5 kW, top/bottom - FK13 corner rounding unit, 2 motors (top/bottom) with automatic 8-position tool changer and multiple exchange heads, iSystem - Profile scraper MN21, top/bottom, with axis positioning - Flat scraper FA10, top/bottom, (version with 3 tracing rollers) - KS10 belt sanding unit, for straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: dober (rabljeno), Leto izdelave: 2005, Edgebanding unit Motorized height adjustment Homatic NC 21 control system Frequency converter Hot-melt adhesive unit A20 for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat screen display Feed rate 18.5 m/min? Feed rate steplessly adjustable 8-24 m/min or 12-24 m/min Minimum working width 55 mm with workpiece thickness 22 mm / 100 mm with workpiece thickness 60 mm Subject to workpiece length Workpiece overhang 30 mm Kdodpfx Adoyvy D Iokei Workpiece thickness 12-60 mm Minimum workpiece thickness (without contour routing and finishing unit): 8 mm Joint milling unit Workpiece preheating Gluing section A 20 / Hot-melt gluing unit A 34 Magazine for solid wood edges, strips and rolls Roll cutting device Pressure zone End trimming unit KL Release agent spray device top/bottom Melting unit with granulate container instead of glue pot QA glue pot front part for changing (color change) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-finishing unit, complete Finishing unit The return conveyor shown is not included in the scope of delivery. The data was taken from a data sheet, therefore no guarantee is given. Exact equipment on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. • Stanje: rabljeno Dodatna oprema Kdodpfx Aoyhqi Djdksi • BARBARIC povratni sistem za obdelovance

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Ta HOMAG KAL 330/6/A3/S2 je bila izdelana leta 2009. Rabljeni robni lepilni stroj z lepilnim agregatom za EVA talilno lepilo, tlačno cono, rezalnim agregatom, kopirno rezkalno glavo, strgalo in polirnim agregatom. Vključuje sistem za vračanje obdelovancev LIGMATECH. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOMAG KAL 330/6/A3/S2. Za več informacij nas kontaktirajte. Kedpoychduefx Adksdi

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: RU0010622 - Koda proizvajalca: 2-083-01-0276 - Stanje: rabljeno - Funkcionalnost: ni testirano - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - Če vas zanima, nudimo storitev pregleda, kontaktirajte nas. Kodpsyrq Alsfx Adkedi