Homag Bof 211 nakup rabljenega (490)

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 With clamping grippers: 7 Rotary device (for panels): up to 90° Ljdpfx Ahjh Imvhousrn Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & second in a production line) Control system: (CNC) NC 21, Homatic software Safety and sound-insulated enclosure No. 3+3 vertical columns to support the working units Min. useful working width (mm): Ledpfeh Nx U Nsx Ahuorn Max. useful working width (mm): 3,000 Max. useful working thickness (mm): approx. 100 Max. workpiece length before stops (mm): 1,250 Retractable stop cams, spacing (mm): 1,000 Feed rate (min/max) continuously adjustable (m/min): approx. 8–25 No. 4 work units (for each side of the machine): 1 automatic scoring unit (approx. 1 × 1.5 kW) 1 cutting/milling unit (approx. 1 × 4.5 kW) 1 universal milling unit (electro-pneumatically controlled, approx. 1 × 4.5 kW) 1 free space

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 Lrsdpfsvhcbzsx Ahuon No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), PANEL SIZING SAW ANGLE SYSTEM Control system: CadMatic 4 Professional Powered roller conveyors (No.) 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Infeed saw with clamping grippers (No.) 4 1st Panel sizing saw Max. cutting width (mm) 4300 Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Adjustable saw carriage feed (m/min) 1 - 150 2nd Infeed saw with clamping grippers (No.) 8 2nd Panel sizing saw Max. cutting width (mm) 2200 Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Lredpfx Ahspuh Dkeuon Adjustable saw carriage feed (m/min) 1 - 150 Front air cushion tables No. 2 (+1 additional and more) Total connected load (kW) 52.6

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) “SOFTFORMING” Edge material (rolls) thickness (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 8 / 60 Control/software: PC 22 / WoodCommander Feed speed (adjustable) m/min 10 - 40 Side adjustment of aggregate carrier, manual mm 30 - 80 FORMATTING SECTION: Spray unit (for liquid non-stick agent) Double milling unit KD 10 (2 x 6.6 kW) Milling unit for softforming (2 x 1.85 kW) 0°-20° Sanding belt unit for straight edge KS 10 (mm 120 x 2100) Clearance (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt adhesive + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with upper-lower cutters (In-Lay) Edge magazine for rolls E3 (compartment No. 6) End trimming unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90° Profile scraper unit PN20 (pneumatic) Finishing unit (flat scrapers + polishing unit) FA11 Lrsdpfx Ajt N H Tajhusn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 Lrsdpfxsx Aqbhe Ahujn O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS Lsdjwxvdcepfx Ahuern O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): Lrjdsv Rpdnepfx Ahuon - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW Ljdpfonzhxqex Ahuorn C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts Lsdpfoivawpsx Ahujrn No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), 4-axis CNC machining center for milling, drilling, cutting, and edge banding. Gooseneck machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 support/consoles (mm 1340) LEDs indicate the programmed positions of the vacuum clamps (Y-axis) Lsdpfx Aheh Ucn Roujrn Automatic tool changer (carousel-type, 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 2 working zones – 2 vacuum pumps (capacity 100 m³/h) Chip conveyor for removing waste from the machining process Total connected load: 27 kW Working units (top) 17 independent vertical drilling spindles (2.2 kW) 4 independent horizontal drilling spindles 1 vertical electrospindle HSK F63 (main spindle 11 kW) 1 groove saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), gluing unit (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 Lrodpehvi E Ijfx Ahuon FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 Ljdpfx Ahewk Hp Teujrn - Polishing Unit

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) Lodpfxsp N D Nge Ahuern End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: Lsdpfx Ajv D U Urjhusrn O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) Lodpelkbn Isfx Ahujrn C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Ledpfx Ajuhv R Dohusrn Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) Lodpjl Iz Tusfx Ahuern End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Specifikacija Dolžina: 4605 mm Debelina obdelovanca: 40 mm Robni material v roli: 0,4 – 3 mm Robni material v traku: 0,4 – 3 mm Hitrost podajanja: 8 m/min Enota za utrjevanje spojev: 40 mm Enota za hitre spremembe lepilnega sistema Magazin za navit material Pnevmatska dvotočkovna nastavitev pritisne cone Enota za končno obrezovanje s pnevmatsko nastavitvijo Pnevmatska nastavitev za fino obrezovanje Lredpfszdklcox Ahujn Enota za obrezovanje kontur Pnevmatska nastavitev enote za profilno strganje Strgalo za lepilni spoj Bufferji LED notranja osvetlitev EasyTouch nadzorni sistem Ročno centralno mazanje Ročna nastavitev zgornjega pritiska Valjčni zgornji pritisk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Specifikacija: Vertikalni vrtalni blok s 13 vreteni Horizontalni vrtalni blok s 4 vreteni v osi X Horizontalni vrtalni blok z 2 vreteni v osi Y Rezalna žaga D=100 mm Preverjanje smiselnosti Vreteno za menjavo orodja 10 kW Izmenjevalec orodij s 4 pozicijami Maks. dolžina obdelovanca 200–3050 mm Širina obdelovanca 70–850 mm Debelina obdelovanca 8–56 mm Powertouch zaslon Woodwop za stroj Način varčevanja z energijo Lrodpfxjzdki Ue Ahuon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 0-200-87-0913, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja debelina roba: 3 mm, vrsta nastavitve višine: električni, skupna dolžina: 10.825 mm, Oprema: dokumentacija / priročnik, Used single-sided HOMAG edge banding machine, for straight edges; for joint trimming, edge banding, and post-processing of various edging materials. Fixed stop side on the left. Year of manufacture: 2023, first commissioning: Nov. 2023 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Max. workpiece thickness: 60 mm - Motor-driven height-adjustable top pressure Lredjy D A Swjpfx Ahuen - Workpiece support with roller tracks - Glue pot lift-off at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronized/opposing rotation, 2 x 3 kW, operation-controlled Horizontal positioning via NC motor (CAN) EDGING UNIT V20, comprising: - QA60 glue application unit, with PTFE (Teflon) coating - Premelter for PUR adhesive - Processes both EVA and PUR adhesives - Edging magazine, min. 0.4 mm to max. 3 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors each 0.8 kW (front/trailing edge) Chamfer/straight cut, as well as trim-cutting excess edging - Pre-/flush trimming unit 1.15 kW, top/bottom - Fine trimming unit top/bottom, with NC adjustments - Profile trimming unit MF60 (corner rounding), 2 motors (top/bottom) Servo-controlled with softtouch - Universal milling unit, controlled - Profile scraping blade top/bottom, with interchangeable heads - Flat scraping blade FA10, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL SYSTEM: - PC 23 powerTouch - woodCommander 5 - Gap set-up function - Edge tracking control

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Workpiece & Performance Panel Formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack formation: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Output up to 5 cycles/min • Pallet return + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decor-correct subsequent processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal division with edge trimming • Feed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT HPp11 Crosscut Station Crosscut in through-feed with pressure beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Stack turner (2×8 compartments) for dissolving bundles • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer into the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format machining • 6 units per side • 6.6 kW per unit • Tool Ø up to 200 mm • Joint edge color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure Lredpjywxrajfx Ahusn • integrated edge sealing 11. Sonolit Soundproof Booth Enclosure for both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-Processing 12. BARGSTEDT TTK44/21/14/02 Flip Over Unit Workpiece turning in through-feed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Packing Station Automatic pack assembly with 1st/2nd grade sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Output 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and supply of cartons before packaging • Output up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic package marking (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping System Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Output up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT TFB20/017/04 Belt Conveyor with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross Stacking Unit Automatic stacking onto pallets • Packages up to 1,400 × 195 × 58 mm • Output max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum cups • up to 6 cycles/min • package weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Stanje: dober (rabljeno), Leto izdelave: 1996, za največjo velikost plošče: 320 cm dolžine in 220 cm širine ali globine nedemontirano, na lokaciji Bad Berleburg Lrodpfx Ahoy Nfdyouon

Stanje: rabljeno, številka stroja/vozila: 008516, Tip nameščenega roba: tanek rob, debel rob, masivni les Lepljenje: EVA, PUR Spojnično rezkanje: da Večnamenska enota: da Maks. hitrost podajanja: 18 m/min Maksimalna debelina plošče: 60 mm Lrsdpfx Ahszbrn Isuon Delovni agregati: 7 kosov

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTRE (POINT-TO-POINT) – 4 Axes Gantry-type design Power Control CNC – woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum pod positioning Automatic tool change system 2 disc-type tool changers – magazine/tool positions: W8 (8 rear) + (8 lateral) Maximum working area (X – Y – Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical cabinet and control system Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 in X-axis + 2 in Y-axis) Lodpfx Asyxn Tijhuorn Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63, 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM PACKAGE – PROFESSIONAL