Pritrdilna plošča

Homag Größe 10930/500/H262 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Lhsdpfew A A E Isx Ac Uok Maximum length: 2500 mm

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Lhodpfx Aowrzkzjc Usk Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Lhodpfx Ask Sat Dsc Ujk Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Lhjdpfxjt Hwt Ss Ac Ujk Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Lodpjyr Dmdsfx Ac Ushk Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm 3 clearing stations Lhodpfobrcmksx Ac Usk With chip conveyor + platform for above-floor installation and safety door.

Stanje: rabljeno, številka stroja/vozila: 008388, Delovno območje os X: 3086 mm Delovno območje os Y: 2185 mm Delovna površina: nestinška miza Moč glavnega vretena: 15 kW Lodpjyngzvsfx Ac Ujhk Število krmiljenih osi: 4 osi Število vrtalnih glav: 18 Število mest za orodje: 20

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm Lodpfst Du Tdex Ac Ushk TOOL CARRIERS 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system Lhedpox Sxfvjfx Ac Usk The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: rabljeno, Leto izdelave: 1999, Tlak 130 t Dolžina upogibanja 3550 mm Razdalja med stebri 3060 mm Vgradna višina 510 mm Krmiljenje Cybelec DNC 80 Izsek 320 mm Hod 250 mm Lhsdpfx Acsvxwqfj Usk Delovna višina 900 mm Teža stroja cca 12000 kg Prostorske zahteve cca 4,05x2,1x2,85 m Krmiljenje Cybelec DNC 80 Osi Y1; Y2; X; R Premik matrice z ročnim kolescem 4 omejitveni prsti Hidravlično vpenjanje zgornjega orodja WILA Hidravlično vpenjanje matrice sistem Amada 2 podporni roki Varnostno dvoročno/pedalno upravljanje Različni zgornji in spodnji orodji