Notranji pehanje stroj

Hoffmann RISZ 10x1250x400

Leto izdelave: 1980, Stanje: rabljeno, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min Hjdpfx Ajcdtplsf Tsfb max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 units weight: 4.8 t automatic tool feeder hydraulic clamping system for pull head and end-piece holder automatic loading device for workpiece diameters up to 100 mm magnetic chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Hfjdsvgxfyopfx Af Tsb Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 - Center height: 175 mm - Distance between centers: 1000 mm LINEAR AXES - Grinding length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK - Continuous orientation: +/-8.5° - External grinding wheel dimensions: 500 x 80 x 203 mm - Grinding spindle headstock drive power: 7.5 kW - Cutting speed: 44 m/s Hfodpjuhbydefx Af Tob WORKPIECE SPINDLE HEADSTOCK - Taper type: MT5 - C-axis: +/-0.5° - Drive power: 1 kW - Rotational speed: 30-1,000 rpm TAILSTOCK - Taper type: MT3 - Quill stroke: 35 mm - Quill diameter: 50 mm - Max. workpiece weight between centers: 130 kg ELECTRICAL SUPPLY - Supply voltage: 400V 50 Hz - Machine dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg TOTAL OPERATING HOURS - Operating hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Remote control with electronic handwheel - SENSITRON - Dynamic balancing device Hydrobalance HBA 40000-1 - Automatic length measuring arm MOVOMATIC C25 - In-process external diameter measuring arm MOVOMATIC - Grinding wheel guard with automatic tilting - Fixed diamond dressing device on workpiece spindle headstock - Coolant tank: 375 l - Paper filter - Oil mist extraction - Grinding wheel holder flanges

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Maks. hitrost podajanja: 1 – 30 m/min Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Vreteno: 88 mm Hfjdpfx Ashq Uigjf Tjb Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz

Stanje: rabljeno, Leto izdelave: 2019, x-axis travel: 3,400 mm Hodpfxex H Tt De Af Tjfb y-axis travel: 3,400 mm z-axis travel: 1,600 mm Control system: CELOS 840D sl Op Siemens Max. spindle speed: 20 – 15,000 rpm Main spindle drive power: 52 / 42 kW Tool holder: HSK-A100 Max. torque: 404 / 280 Nm Tilting range B-axis: -30° / +180° Table dimensions: 2,500 x 2,000 mm Max. table load: 10,000 kg Table rotation speed: 5 rpm Distance spindle center to table, horizontal: 130 – 1,730 mm Distance spindle center to table, vertical: 230 – 1,830 mm Distance spindle nose to table, horizontal: -1,500 – 1,900 mm Distance spindle nose to table, vertical: -1,600 – 1,800 mm Type: 5x rotary / wheel Number of tool positions: 303 Max. tool diameter: 110 mm Max. tool diameter with free adjacent pocket: 280 mm Max. tool length: 900 mm Max. tool weight: 45 kg Tool change time: 7.5 sec Tool holder: HSK-A100 Rapid traverse: 60 / 30 / 40 m/min Total power requirement: 140 kVA Machine weight: approx. 106 t Space requirement: approx. 14.0 x 13.0 x 7.0 m 5-axis CNC large universal machining center DMG MORI - DMC 340 U - 2-position pallet changer - Precision package - MDynamics package (improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Taper cleaning station with rotating brushes - Balluff tool identification - Machine protection through rapid shutdown (MPC) - Laminated safety glass window - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with monitor at control panel

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm Hfjdpfxsxp Hmaj Af Tjb - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Hedpfxewl An Ie Af Tofb Maks. prečnik obrade = 550 mm X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Stanje: zelo dobro (rabljeno), Novo 2008 Premer nad posteljo – 600 mm (Ø 23,62") Hedpfxsrfx Tns Af Tefb Premer × dolžina obdelovanca – Ø 300 × 600 mm (Ø 11,81 × 23,62") Maks. premer obdelovanca – Ø 380 mm (Ø 14,96") Maks. hod osi Z/X – 600 / 240 mm (23,62 / 9,44") Z-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min X-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min Premer vretena/premer vlečne cevi – STD: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04") OPT: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03") Hitrost vretena – STD: 8'' vpenjalna glava 3500 vrt/min OPT: 8'' vpenjalna glava 4500 vrt/min, 10'' vpenjalna glava 3500 vrt/min Premer vpenjalne glave – STD: Ø 8'' ; OPT: Ø 10'' Hidravlična konjiček – hod 465 mm (18,3") MT št. 4 VDI orodni postaji – OPT: 8; STD: 10 Hladilna tekočina Transportni trak za odrezke Priključna moč – 208–220 V / 100 A / 3 faze / 60 Hz Tloris (D × Š × V) – 4080 × 1675 × 1842 mm (160,62 × 65,94 × 72,51") Bruto teža (približno) – 5200 kg (11.440 lbs)

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hfjdsiw Dlkopfx Af Teb Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Surface grinding machine Hjdpfxjiv S Avo Af Tsfb Brand: Jakobsen Model: 1432 Year: 1990 RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Heidenhain ND 221B digital readout. Selter electronic magnetic table 800x350 mm with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007. Includes sets of grinding wheels (see photographs).