Karstens nakup rabljenega (28)

Stanje: potreben popravila (rabljeno), Tip: AS - 900 Št. stroja: 74054 Razdalja med konicami: 900 mm Višina konic: 150 mm Maks. dimenzija brusilnega kola: 400 x 80 x 127 mm Višina konic: 150 mm Razdalja med konicami: 900 mm ..... Stanje: Stroja ni mogoče vklopiti! Za stroj velja: stanje neznano! Ibedpfxjxguxfo Ah Dec Obseg dobave po priloženih slikah ....

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 360 mm Dolžina brušenja 1000 mm Višina med konicama 180 mm Teža obdelovanca med konicama maks. 250 kg Ibjdpfxjxbh Ebo Ah Dec Stroj z zelo malo delovnimi urami po obnovi pri strokovnjaku Karstens. Krmiljenje podajanja Jetter Digitalni prikazovalnik Naprava za notranje brušenje Konjiček z natančno nastavitvijo cilindričnosti Hidravlična pinola konjička itd. Hitro nastavljanje brusnega vretenjaka z zračnim ležiščem

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Iedsiv Au Ejpfx Ah Debc Centre Distance: 1100 mm Centre Height: 180 mm / (250 mm = option) Workpiece Weight: 100 kg (between centers), 300 kg (supported between centers) Grinding Wheel Diameter: 400 mm or 500 mm (external grinding wheel) Workpiece Spindle: MT 4, speed steplessly adjustable from 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm Quill Force: 200–600 N (manual, up to 2500 N possible, adjustable = option) Table Swivel Adjustment: 10 degrees Cross Slide Travel: 80 mm Rapid Traverse: 50 mm Coarse Adjustment Air Cushion: 280 mm External Grinding Spindle Motor: 4 kW / (5.5 kW = option) Infinitely variable grinding wheel speed adjustment with potentiometer Internal Grinding Spindle Motor: 2.2 kW Workpiece Spindle Motor: 1.1 kW Hydraulic Motor: 1.5 kW Lubrication Motor: 0.1 kW Hydraulic Tank Capacity: 80 liters Machine Weight (net): 3800 kg Feed Drive via DC Motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning. Separate drives for external and internal grinding spindles. Fully automatic operation, feed movement controlled by rotary switch: rapid approach, rapid retraction, grinding operation, infeed stop, µm-infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with steplessly adjustable drive for live and lockable spindle operation. New digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, including input for retraction, infeed amount, feed rates, spark-out times, idle strokes; compatible with the old Karstens infeed control; with Siemens color touch panel, measuring scales in X and Z axes by HEIDENHAIN. Comparable to Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.

Stanje: dober (rabljeno), Leto izdelave: 2002, Machine type: CNC lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Iedpjkyrwwsfx Ah Djbc Serial number: M02.43446 Year of manufacture: 2002 Available immediately Located ex works for self-dismantling Optional: We can offer dismantling and loading services

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Retrofit 2015 Karstens K 52 cylindrical grinding machine, CNC control system Eckelmann ENC 66, Workpiece length 650 mm, Weiss Schleiftechnik retrofit 2015, Automation upgrade in 2023, Spindle power 7.5 kW, Centre height 180 mm, Grinding wheel diameter 500 mm, Straight/angled plunge grinding, Filtration system, Ibsdpfx Aheuc Utto Dsc Automatic loading between centres, Prismatic belt for raw and finished parts

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A Karstens cylindrical grinding machine, originally built in 1992 and completely overhauled and modernized in 2014, is available. Centre distance: 1000mm, centre height: 180mm, grinding diameter: 360mm, max. workpiece weight between centres/in chuck: 250kg/70kg, grinding wheel diameter: 400mm. Spindle taper: MK4, rotation speed: 450rpm, swivel range: 90°, quill taper: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, displacement spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Includes 3 almost new centres and grinding wheels. Documentation is available. Viewing on site is possible. Isdpfov Suftsx Ah Debc

Stanje: dober (rabljeno), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, Data: Centre distance: 300 mm Centre height: 150 mm External grinding spindle: 4.0 kW Grinding wheel max.: 400 x 80 x 127 mm Spindle taper: MT4 Ijdpsxbnlnjfx Ah Dsbc Workpiece headstock: 0.55 kW Workpiece speeds: 30 – 450 rpm Internal grinding spindle: 1.5 kW

Stanje: rabljeno, Leto izdelave: 1999, Grinding diameter 360 mm Grinding length 650 mm Centre height 180 mm Control SIEMENS 840 D Total power requirement 15 kW Machine weight approx. 9500 kg Space requirement approx. m KARSTENS CNC-controlled external cylindrical grinding machine Model K 52 - 650 (98 019 06 52051) Year of manufacture 1999 --- Centre height: 180 mm Iodpst Hw A Hefx Ah Debc Distance between centres / max. clamping length: 750 mm Max. grinding length: 650 mm Grinding length for plunge grinding: 150 or 210 mm External grinding diameter approx. min./max.: 5-360 mm Max. grinding width for plunge grinding: 150 mm Max. workpiece weight: between centres / chuck-mounted: 70/250 kg Grinding wheel dimension (diameter x width x bore): 600 x 150 x 203 mm Cutting speed, infinitely variable, max.: 35/50 m/sec Cross slide travel (X-axis): 360 mm Cross slide feed rates: 0.01 – 6,000 mm/min Workhead (MK 4) speed range (C-axis), stepless: 1–1,000 rpm Table speed (Z-axis): 0.01 – 10,000 mm/min Measuring system resolution: 0.0002/0.0005 mm Spindle drives: 11/15 kW * Total drive approx. 30 kW - 400 V - 50 Hz Weight approx. 9,500 kg Accessories / Special Features: - Granite machine base offering all technical and thermal advantages - SIEMENS CNC control type 840 D with software and sub-programs - Handheld control unit - MOVOMATIC measuring control type ES 400 with hydraulically retractable measuring arm - Grinding slide set to 0°, ideal for straight plunge grinding - Grinding wheel arranged on the left side, extra wide grinding wheel up to 210 mm - Workhead with fixed centre or flange drive - Tailstock mounted on sub-slide, hydraulic stroke approx. 50 mm, with cylinder correction - Driven diamond wheel profiling device for CNC profiling of the grinding wheel - Wheel balancing unit integrated in the machine - The machine is currently equipped with a HEILIG workpiece loading gantry, which automatically loads/unloads cylindrical workpieces (approx. 30 x 100 mm L) into and out of the working area - Raw and finished workpieces are handled simultaneously via double gripper - Separate hydraulic power unit; DEMAG chain hoist for simpler grinding wheel changes - Complete machine enclosure with manually lockable and electrically monitored doors - No coolant system, but includes an intermediate tank for central supply Condition: Good – ready for demonstration soon – ideal machine for plunge grinding operations Delivery: ex stock – as inspected Payment: strictly net – upon invoice receipt We offer a wide selection of grinding machines of all types. Please contact us with your requirements.

Stanje: novo, We offer you spare parts of all kinds for your conventional or CNC Karstens/GP cylindrical grinding machine, including tailstock, workpiece spindle headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed controls new and used, reversing blocks for the Z-axis in exchange, and much more... Iodpfx Ahjup Aike Djbc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, višina središča: 180 mm, teža obdelovanca (maks.): 70 kg, širina na sredini: 650 mm, premer brusilnega koluta: 400 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Fully refurbished cylindrical grinding machine, year of manufacture 2024! No minimum price – guaranteed sale to the highest bidder! TECHNICAL SPECIFICATIONS Centre distance: 650 mm Centre height: 180 mm Workpiece weight: 70 kg between centres, 250 kg between centres Grinding wheel diameter: 400 mm Workpiece spindle and tailstock Workpiece spindle: Morse taper 4 Speed: infinitely variable 30–450 rpm Swivel range: 0–90 ° Tailstock: Morse taper 4 Quill stroke: 45 mm Quill force: 200–600 N Iedpfx Aswy Ufueh Dsbc Axes and adjustments Table swivel: 10 ° Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm MACHINE DETAILS Motor External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: 3,600 kg EQUIPMENT Infeed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock Separate drives for external and internal grinding spindles Fully automatic operation cycle: rapid infeed, rapid return, grinding mode, infeed stop, micron infeed Automatic longitudinal grinding cycle Central coolant supply Infeed control for longitudinal and plunge grinding

Stanje: dober (rabljeno), Leto izdelave: 1974, Digital display Grinding diameter 250 mm Ibjdpewpya Nofx Ah Dsc Grinding length 650 mm Accessories

Leto izdelave: 1974, Stanje: pripravljen za uporabo (rabljen), A Karstens cylindrical grinding machine with digital readout is available. Center height: 180mm, grinding diameter: 360mm, distance between centers: 650mm, max. workpiece weight between centers/floating: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, spindle taper: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible. Isdpfx Aovf Iy Rsh Debc

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill Ijdpfx Aot Hw Rdjh Dsbc - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, We offer you spare parts of all kinds for your conventional or CNC Karstens/GP cylindrical grinding machine, covering tailstocks, workpiece headstocks, grinding spindle heads, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH, SIEMENS), bellows, bearings, K11/K21 infeed controllers new and used, and Z-axis reversing blocks on an exchange basis, among others. Ibedpfjraibvox Ah Dec

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, višina središča: 180 mm, teža obdelovanca (maks.): 70 kg, širina na sredini: 650 mm, premer brusilnega koluta: 400 mm, teža obdelovanca med konicami: 250.000 g, The machine has been fully repaired and inspected by the seller! TECHNICAL DETAILS Working Area Centre distance: 650 mm Centre height: 180 mm Workpiece weight: max. 70 kg floating / max. 250 kg between centres Grinding wheel diameter: 400 mm Workpiece Spindle Mount: MK4 Speed: 30 - 450 rpm Swivel range: 0 - 90° Motor power: 0.55 kW Tailstock Mount: MK4 Quill stroke: 45 mm Quill force: 200 - 600 N Travel and Adjustments Table swivel: 10° Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment, air cushion: 280 mm MACHINE DETAILS Drives External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Weight Machine weight: 3,600 kg Ibjdpfx Aowy Rnfoh Doc EQUIPMENT Air cushion-supported rapid adjustment of the grinding spindle head Separate drives for external and internal grinding spindles Fully automatic operation with rotary switch Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with steplessly adjustable drive Infeed control for longitudinal and plunge grinding

Stanje: pripravljen za uporabo (rabljen), Five metalworking machines are available: (1) Karstens cylindrical grinding machine, (2) Iberimex lathe MOD. T6, (3) multi-spindle drilling machine, (4) 2x Weiler thread cutting machines. Machines can be inspected on site. Isdpenl Emfsfx Ah Dobc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load (between centers): 3000 N (300 kg) Maximum load (cantilevered): 1000 N (100 kg) Z-axis: Table swivel range: 10 degrees Table drive (hydraulic): 0-4 m/min X-axis: Infeed spindle travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed modes: Plunge grinding, longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01-48 4 pre-selectable infeed increments: mm/ 0.001-0.1 Dwell at plunge grinding: s 0-99, 0-99 strokes Tip infeed: mm/Ø 0.001 Grinding spindle headstock: Universal, swiveling: degrees 0-180 Grinding wheel: external DxWxB mm 500x100x127 or 203.2 Grinding wheel (face, optional): D mm 250x32x76.2 Internal grinding wheel (option): D mm (2-250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle fitting: mm 80 (100) Workpiece spindle headstock: Infinitely variable drive: Mk 4 1/min 30-270 / 50-450 Workpiece spindle lockable Spindle fitting: mm MK 4/24 Spindle nose for flange mounting: MK 4, mm cylindrical Ø63H6 x 6 Workpiece headstock swivels for turning component: deg 0-90 Tailstock: Quill fitting / quill diameter: mm MK4 750 Quill travel: mm 45 Quill force: N 100-800 / 250-1400 adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40µm Connections: Total connected load: kW 6.5 - 10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece spindle headstock: kW 0.55 (1.1) Coolant system: kW 0.75 - 2.2 Lubrication pump (guideways): kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Ibodpetqf Sqofx Ah Dec Pneumatics: bar 6

Stanje: pripravljen za uporabo (rabljen), Grinding length: 650 mm, centre height: 150 mm, grinding wheel dimensions: 400 x 80 x 127 mm, sleeve diameter with MK 4 taper: 50 mm, weight: 2.9 t, including band filter, electrical schematics, and hydraulic diagrams. On-site inspection is possible. Ibedpfx Ahjp T Uphj Djc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1990, Karstens K11 1000 Fully Equipped The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine is inspected and in very good condition. As specialists in Karstens cylindrical grinding machines, we can offer you comprehensive service (electrical and mechanical) for the machine after purchase. Technical Data: Ibsdpsh Riwdofx Ah Dec Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 100 kg between centers (unsupported), 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MT 4, infinitely variable speed 30-450 rpm, swiveling range 0 - 90° Tailstock: MT4, quill stroke 45 mm, fine adjustment for cylinder Quill force: 200-600 N, hydraulically actuated via foot pedal Table swivel: 10 degrees Infeed spindle adjustment travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Net weight: 3800 kg Infeed drive via DC motor Air-cushion assisted rapid adjustment of the grinding spindle headstock for fast and safe approach to the grinding position. Separate drives for external and internal grinding spindles. Fully automatic operation, infeed movement via rotary switch: Rapid advance, rapid retraction, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece spindle headstock with infinitely variable drive in live and lockable positions. Infeed control for plunge and traverse grinding, programmable for retraction, infeed increments, feed rates, dwell times, idle strokes. Digital displays for grinding spindle B axis, workpiece spindle, X and Z axes by HEIDENHAIN. Paper band filter unit approx. 250 L Comparable to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), A Karstens universal grinding machine, originally built in 1968 and completely overhauled in 2016, is available. Grinding length: 320mm, center height: 150mm, grinding wheel diameter: 350mm, spindle diameter: 60mm, workpiece headstock: MK4, tailstock: MK4. Includes approximately 200L wet grinding system, 3x grinding wheel arbors, internal grinding attachment, grinding spindle, quick-clamping device, collet holders, various chucks, and extraction system. Documentation is available. An on-site inspection is possible. Ibjdpfx Ahsw E Iy Aj Djc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: Centre Distance: 750 mm Centre Height: 180 mm / (250 mm = optional) Workpiece Weight: 100 kg between centres (unsupported), 250 kg between centres Grinding Wheel Diameter: 400 mm or 500 mm (external grinding wheel) Workpiece Spindle: Morse taper 4 (MK4), infinitely variable speed control 30–450 rpm, swivel range 0–90° Tailstock: MK4, quill stroke 45 mm, centre correction Quill Force: 200–600 N manual, (up to 2500 N possible, adjustable = optional) Table Swivel: 12.5 degrees Infeed Spindle Travel: 80 mm Rapid Traverse: 50 mm Coarse Adjustment with Air Cushion: 280 mm External Grinding Spindle Motor: 4 kW / (5.5 kW = optional) Stepless speed adjustment of the grinding wheel via potentiometer Internal Grinding Spindle Motor: 2.2 kW Workpiece Spindle Motor: 1.1 kW Hydraulic Motor: 1.5 kW Lubrication Motor: 0.1 kW Hydraulic Tank: 80 litres Machine Weight: Net 3500 kg Infeed driven by DC motor Grinding spindle stock quick adjustment supported by air cushion for rapid and safe positioning at the grinding position. Separate drive for external and internal grinding spindles. Fully automatic operation, infeed movement via rotary cam switch: Rapid advance, rapid traverse, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle. Isdpfx Aoiv Audsh Dsbc Central coolant supply for all grinding positions. Workpiece spindle head with steplessly adjustable drive for both rotating and clamping spindle operation. Infeed control is digital with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, infeed values, feed rates, dwell times, rapid traverse, compatible with previous Karstens infeed control, with colour Siemens touch panel. Scale on X and Z axes by HEIDENHAIN. Comparable to Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Danobat.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Karstens K11 650 The cylindrical grinding machine has been fully overhauled by PS-Karstens. The machine has been tested and is in excellent condition. As we specialize in Karstens cylindrical grinders, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Isdpfxeh Rixxs Ah Debc Centre distance: 650 mm Centre height: 180 mm Workpiece weight: 100 kg between centres (unsupported), 250 kg supported Grinding wheel diameter: 400 mm Workpiece spindle: Morse taper 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: Morse taper 4, quill stroke 45 mm, fine adjustment for cylinder Quill force: 200–600 N, hydraulically operated via foot pedal Table swivelling: 10 degrees Feed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,800 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and secure positioning of the grinding position. Separate drive for spindles for external and internal grinding. Fully automatic operating cycle, infeed movement via dial switch: Rapid approach, rapid return, grinding operation, infeed stop, μm-infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Workpiece headstock with infinitely variable drive with rotating and lockable spindle. Infeed control for longitudinal and plunge grinding, programmable retraction, infeed quantities, feed rates, spark-out times, idle strokes. Paper band filter automatic, approx. 250 L Comparable to Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: Centre Distance: 750 mm Centre Height: 180 mm / (250 mm = optional) Workpiece Weight: 100 kg between centres (unsupported), 250 kg between centres Grinding Wheel Diameter: 400 mm or 500 mm (external grinding wheel) Workpiece Spindle: Morse taper 4 (MK4), infinitely variable speed control 30–450 rpm, swivel range 0–90° Tailstock: MK4, quill stroke 45 mm, centre correction Quill Force: 200–600 N manual, (up to 2500 N possible, adjustable = optional) Table Swivel: 12.5 degrees Infeed Spindle Travel: 80 mm Rapid Traverse: 50 mm Coarse Adjustment with Air Cushion: 280 mm Ibjdpfxeh Rftlo Ah Djc External Grinding Spindle Motor: 4 kW / (5.5 kW = optional) Stepless speed adjustment of the grinding wheel via potentiometer Internal Grinding Spindle Motor: 2.2 kW Workpiece Spindle Motor: 1.1 kW Hydraulic Motor: 1.5 kW Lubrication Motor: 0.1 kW Hydraulic Tank: 80 litres Machine Weight: Net 3500 kg Infeed driven by DC motor Grinding spindle stock quick adjustment supported by air cushion for rapid and safe positioning at the grinding position. Separate drive for external and internal grinding spindles. Fully automatic operation, infeed movement via rotary cam switch: Rapid advance, rapid traverse, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle. Central coolant supply for all grinding positions. Workpiece spindle head with steplessly adjustable drive for both rotating and clamping spindle operation. Infeed control is digital with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, infeed values, feed rates, dwell times, rapid traverse, compatible with previous Karstens infeed control, with colour Siemens touch panel. Scale on X and Z axes by HEIDENHAIN. Comparable to Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Danobat.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Maximum load (between centres): 3000 N (300 kg) Maximum load (flying): 1000 N (100 kg) Z-axis: Table swivel adjustment: 10° Table drive (hydraulic): 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / longitudinal grinding 4 selectable infeed speeds (mm/min/Ø): 0.01–48 4 selectable infeed increments (mm): 0.001–0.1 Spark-out during traverse grinding: 0–99 s / 0–99 strokes Tip infeed: 0.001 mm/Ø Universal grinding spindle head, swivelling: 0–180° Grinding wheel, external (D x width x bore): 500 x 100 x 127 or 203.2 mm Grinding wheel, face (option): 250 x 32 x 76.2 mm Grinding wheel, internal (option): 2–250 mm Drive power, external & face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear, external: 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mount: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece spindle: lockable Spindle mount: MK 4/24 mm Spindle nose for flange mounting: MK 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0–90° Tailstock: Quill mount/quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40µ Connection values: Total connected load: 6.5–10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 L Pneumatics: 6 bar Ijdpjtqf Rzsfx Ah Dsbc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: - Centre distance: 1100 mm - Centre height: 180 mm (250 mm optional) - Workpiece weight: 100 kg between centers (floating), 300 kg between centres - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: MT4, infinitely variable speed 30–450 rpm, swivel range 0 – 90° - Tailstock: MT4, quill stroke 45 mm - Quill force: 200–600 N manually (up to 2500 N adjustable as an option) - Table swivel angle: 10 degrees - Infeed spindle adjustment travel: 80 mm - Rapid traverse travel: 50 mm - Coarse adjustment with air cushion: 280 mm - External grinding spindle motor: 4 kW (5.5 kW optional) - Stepless speed adjustment of the grinding wheel using potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank: 80 litres - Net machine weight: 3,800 kg - Infeed drive via DC motor - Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning of the grinding position. - Separate drive for external and internal grinding spindles. - Fully automatic operating sequence, infeed movement via rotary cam switch: rapid approach, rapid withdrawal, grinding operation, infeed stop, μm infeed. - Automatic longitudinal grinding cycle - Central coolant supply for all grinding stations - Workpiece spindle head with steplessly adjustable drive for rotating and clamping spindle. - New digital infeed control system with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, infeed quantities, feed rates, spark-out times, idle strokes. Compatible with the previous Karstens infeed control system, equipped with a colour Siemens touch panel. - Comparable to Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat Isdpfxoh Rimmo Ah Dsbc