Cilindrični brusilni stroj - Zunanjost

KARSTENS K 52-650

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swiveling range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum indexing increment: 2.5 [degrees] Crodoylc R Uspfx Apleb - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLESTOCK - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill travel: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 20 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] ACCESSORIES - Control: FANUC Oi-TD - Electronic handwheel - 3-color status indicator light - Oil mist extraction unit - Direct measuring systems for axes: X / Z - Dynamic balancing of grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Stationary dressing device - Workpiece touch probe - Coolant tank: 375 [l] * with paper filter

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Codpfxouxft Ee Aplerb Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, Leto izdelave: 2004, Tehnične podrobnosti: Premer kolesa - maks.: 130 mm Širina kolesa: 25 mm Modul - maks.: 3 Modul - min.: 0,5 Krmiljenje: Siemens 840D Codpfsvi Ninjx Aplorb Premer udarne vretena: 85 mm Število hodov - brezstopenjsko nastavljivo: 500 - 2500 hodov/min Hod: 30 mm Skupna potrebna moč: 48 kVA Teža stroja cca.: 11,5 t Prostorska zahteva cca. D x Š x V: 4,7 x 3,0 x 3,3 m Oprema: -Protiprizma z vrhom -Transporter za ostružke -Hidravlično upravljana nasprotna roka in linearno vodenje Na zalogi. *

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0000025, višina središča: 315.425 mm, teža obdelovanca (maks.): 3.000 kg, dolžina brušenja: 3.000 mm, premer brusilnega koluta: 750 mm, skupna širina: 2.700 mm, skupna dolžina: 11.000 mm, skupna višina: 2.200 mm, premer brušenja: 630.850 mm, teža obdelovanca med konicami: 3.000 g, razdalja med središči: 3.000 mm, širina brusilnega kolesa: 100 mm, dolžina podajanja os Z: 3.300 mm, hitrost vretena za brušenje: 1.000 obr/min, skupna masa: 17.000 kg, vrtljajska hitrost (min.): 2 obr/min, največja hitrost vrtenja: 250 obr/min, trajanje garancije: 24 meseci, hitro pomikanje X-os: 3 m/min, hitri pomik na osi Z: 6 m/min, vhodna napetost: 400 V, največja hitrost vretena obdelovanca: 250 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Cylindrical grinder BUC63/3000 CNC, new, in 100% condition, equipped with Sinumerik ONE or INTRONIX TOS CNC control system. Crjdju U Ewgopfx Apleb It is possible to extend the machine with an additional device for superfine finishing SUPFINA, or with a grooving device for rubber or plastic rollers.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljene različne 3R sisteme. Sistemi so v zelo dobrem stanju in popolnoma delujoči. Ogled možen po predhodnem dogovoru. Pozicija 1 System 3R-203 rotacijski element WEDM 360° Pozicija 2 System 3R-201J adapter WEDM 90° Pozicija 3 System 3R-201J adapter WEDM 90° Pozicija 4 System 3R-201J adapter WEDM 90° Pozicija 5 System 3R-202 MiniBlock Pozicija 6 System 3R-202 MiniBlock Pozicija 7+8 System 3R-204 nastavljivi adapter po višini WEDM Pozicija 9 System 3R-218/30S seti nosilcev Pozicija 11 System 3R-602.21 ročno vpenjalno glavo Macro Pozicija 12 System 3R-294.3 primež Pozicija 15 System 3R-293.3 SuperVice Pozicija 17 System 3R-200-4J-2 470 mm System 3R-200-4J-2 470 mm System 3R-200-4J-2 330 mm System 3R-200-4J-2 138 mm Pozicija 18 System 3R-239–545 0006-V01 System 3R-239–495 Pošiljanje in ogled sta možna! Cjdjxqn Ubjpfx Aplorb

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine Cjdpfsvca Izsx Aplorb TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, CNC control Sinumerik 840D NC rotary table B-axis Magazine for 320 tools Pallet changer device, 2 pallets 500mm x 500mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Cjdpfxeq Ui Hqs Apljrb Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive capacity 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and machine description are not binding.

Stanje: dober (rabljeno), Leto izdelave: 2014, višina središča: 180 mm, širina na sredini: 600 mm, premer brušenja: 260 mm,

Stanje: rabljeno, Leto izdelave: 2017, Technical specifications: Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Csdjttxg Sspfx Aplsrb Required space approx.: 4.7 x 3.65 x 3.0 m

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Cedst Hw Rdspfx Aplsrb Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice