Herma nakup rabljenega (1.762)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes Iijdovz Hq Tepfx Ah Ajk - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, prevoženi kilometri: 523.476 km, moč: 390 kW (530,25 KM), prva registracija: 07/2020, vrsta goriva: dizel, skupna masa: 18.000 kg, vrsta prenosa: samodejen, Oprema: filter saj, Vehicle number: 243461 1st owner, accident-free, full service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Additional hot water heater, driver's cab * Safety Package * Climate Package * Sight Package ASSISTANCE SYSTEMS * Automatic main/dipped beam and cornering light * Electronic Stability Program (ESP) * Lane Departure Warning Assist * Distance Keeping Assist * Light sensor * Rain sensor * Predictive Powertrain Control * Attention Assist * Traffic Sign Assist ENGINE, TRANSMISSION & CHASSIS * Secondary water retarder * High Performance Engine Brake AUDIO & COMMUNICATION * Navigation system * CB radio, 24 V INTERIOR * Automatic climate control * Multimedia cockpit, interactive * Preparation for Truck Data Center 7 * Comfort driver's suspension seat * Passenger functional seat * Comfort bed, lower * PremiumComfort mattress, lower * Velour seat cover, driver's seat * LED ambient lighting, driving and living * Electric stand-alone air conditioning * Drawers under bed * MirrorCam switch at bed * Engine version Euro VI, D * Interior color: Almond Beige * Flat floor variant * Driver airbag * Refrigerator in drawer, under bed LIGHTING & VISIBILITY * Bi-Xenon headlights * LED daytime running lights * Halogen fog lights * LED rear lights * Work lights, lower WHEELS * Aluminium wheels 9.00 x 22.5, Dura-Bright, Alcoa * Aluminium wheels 11.75 x 22.5, front axle, Dura-Bright, Alcoa TECHNOLOGY & SAFETY * Active Brake Assist 5 EXTERIOR * Integrated rear section * Underbody cladding, aerodynamic * Side panel cladding, aerodynamic * Electric lifting roof * Fifth wheel coupling height, H = 190 mm * Low-maintenance fifth wheel coupling * Fifth wheel coupling, without mounting plate * Fifth wheel coupling Compact, Jost JSK 40K * External sun visor, transparent Iisdpfxovycpvj Ah Aek * MirrorCam mount chromed, lower cover in cab color OTHER EQUIPMENT * Remote Online * Pre-installation for Mercedes-Benz Truck App Portal * Pre-installation for LSVA recording device * Main tank, left * Tank 720l + 75l AdBlue * Left side, 650x700x2170 mm, aluminium * Access steps * Wheelbase 3,700 mm * Compressed air connection, in driver's cab * Residual heat utilization * Additional heat insulation * Pre-installation for wide comfort bed, upper * Interface for Fleet Management System (FMS) * Pre-installation for rotating beacon lights * Trailer socket 24 V, 15-pin * Pre-installation for lift axle switch, semi-trailer/trailer * Cab width 2.50 m Further features * Chrome package, interior * L cab GigaSpace, 2.50 m, flat floor S5A ---- Subject to prior sale and errors. The vehicle description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense. The exact specification is available from our sales staff. Please contact us.

Leto izdelave: 2020, Stanje: dober (rabljeno), številka stroja/vozila: 054889, Aduna K100 dvo-komorna čistilna naprava (pranje + izpiranje) z vakuumskim sušenjem. Vključuje naslednjo opremo: vakuumsko sušenje (Busch-pumpa, rotacijska lopatična črpalka tip RA), tlačna in pretočna pršilna funkcija z možnostjo hitrega polnjenja, pršenje s 4-krakimi šobami, ojačan črpalni sistem 5,5 bar, izpihovanje šob proti prenosu medija, impulzno sušenje s toplotno vezavo, filtracija ostružkov (vrečasti filter) v povratnem mediju, avtomatska drsna vrata (vertikalna s preglednim oknom), oljni separator, kondenzator pare za robove hlajen z zrakom, uporabniku prijazen, programabilen krmilnik, časovno stikalo, avtomatska regulacija nivoja medija, avtomatska dozirna naprava, kaskadno prelivanje iz rezervoarja 2 v rezervoar 2, možnost daljinskega servisa. Avtomatska nakladalna enota (zaloga za 3 košare v območju nakladanja, 1 košara pred komoro, 3 košare v območju razkladanja – 3-1-3), 8 kosov euro-standard košar (dimenzije: 670x480x400 mm), max. obremenitev: 100 kg. Iiodpfxsxz S Utj Ah Aek Priključna moč: 27 kW, 55 A. Dimenzije po priloženi skici.

Stanje: rabljeno, prevoženi kilometri: 29.998 km, moč: 96 kW (130,52 KM), prva registracija: 01/2018, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Renault Master from 1st Owner Multiple units in stock VAT deductible Net price: €13,999 First registration: 01/2018 Mileage: 29,900 km Power: 96 kW / 130 HP If you have questions: For additional equipment and special features, see below: ---- Please no emails Emails cannot be processed due to time constraints. Thank you for your understanding! ---- Opening hours and further information: Viewing and purchase without appointment possible: Mon - Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Contact: Christian Hirsch If you have questions: Christian Hirsch Please try calling multiple times as we are frequently in customer meetings. ---- - Air conditioning - Rear-view camera - Hands-free system (Bluetooth) - Radio / CD / 2x USB / AUX / Bluetooth - 6-speed manual transmission - Rear wing doors (opening angle 270 degrees) - Central locking with remote - On-board computer - Eco mode - Height-adjustable steering wheel - Height-adjustable seat - Front centre armrest (left & right) - Passenger airbag deactivation - ABS with EBD and brake assist - LED cargo area lighting - Cargo protection package: wooden panelling of side walls up to roof, wooden floor in cargo area, lashing eyes in cargo area walls - Side marker lights - Lashing eyes in cargo floor - Lashing eyes, side wall in cargo area - Storage shelf - More equipment, see below Further features: Storage shelf, Driver's airbag, Electrically adjustable and heated exterior mirrors, Outside temperature display, Side marker lights, Brake assist, Tachometer, Electronic brakeforce distribution, Body: high-roof panel van, Fuel tank capacity: 105 litres, Load compartment partition, Height-adjustable steering column, Model update, Engine 2.3L – 96 kW dCi diesel, Euro 6, Pollen filter, Wheelbase: 4332 mm, Smoker's package, Tyre repair kit, Low emission according to Euro 6 standard, Shift point indicator, Sliding door cargo/passenger compartment on right, Front mud flaps, Side protection mouldings, Seat upholstery: fabric, Cab seats: height-adjustable driver’s seat, Lashing eyes in cargo area floor, Thermal insulation glazing, Permissible gross weight: 3.5 t Please no emails Emails cannot be processed due to time constraints. Thank you for your understanding! ---- Opening hours and further information: Viewing and purchase without appointment possible: Mon - Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Iiodpswh Ibxofx Ah Aek Tabakried 11 84076 Pfeffenhausen Contact: Christian Hirsch If you have questions: Christian Hirsch Please try calling multiple times as we are frequently in customer meetings. ---- More offers at Equipment details determined via VIN inquiry; technical errors may occur. Details provided online are non-binding descriptions and do not represent guaranteed features. The seller is not liable for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale.

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum Iiodpfx Aehqnl Teh Ajk - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC Control: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X travel: 800 mm Y travel: 800 mm Z travel: 1000 mm Working spindle torque (25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine with: 80 pcs. Spindle speed: 10,000 rpm Drive power - spindle motor: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (l x w): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle operating hours: 7,000 h Operating hours: 14,000 h Setup station: 4 x 90° Hydraulic pressure: 200 bar Additional information: - The machine has been measured - Geometry is in excellent condition - Spindle runs somewhat rough - Clamping towers and tool holders are included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer Iisdpfxox Hn D Rj Ah Ask - Scraper belt conveyor for dry machining - Cold light in the working area - Central cooling unit for motor spindle and control cabinet - Operator panel at setup station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by appointment

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h Iiedpfxsvz Hq Hj Ah Ask - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, prevoženi kilometri: 1.000 km, moč: 120 kW (163,15 KM), prva registracija: 05/2023, vrsta goriva: dizel, skupna masa: 3.001 kg, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, Oprema: ABS, airbag, centralno zaklepanje, filter saj, greljenje sedeža, klimatska naprava, računalnik na krovu, servovolan, spojka prikolice, tempomat, E07 Hill Start Assist, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, GE1 6-speed manual transmission TSG 380, JK3 Instrument Cluster with Pixel Matrix Display, V20 Interior Paneling in Cargo Area, Upper Panels, RS7 Steel Wheels 6.5J x 17, EA4 Audio 40, SE5 Driver’s Seat Lumbar Support, XO9 Mercedes-Benz MobiloVan with DSB and GgD, CF0 Standard Chassis, ZC5 Sales Identifier 0, HH9 Semi-automatic Regulated Air Conditioning TEMPMATIC, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, RD9 Tyres with No Specified Brand, MS1 Cruise Control, Q22 Fixed Ball-Type Towbar, HI1 Climate Zone 1 (cold/comfort), Z41 Registered as a Commercial Vehicle, W65 Tailgate, LA2 Headlight Assist, ZM0 Panel Van, C70 Pedestrian Protection, RM7 Summer Tyres, E34 Buffer Battery for Start Procedure, J55 Seat Belt Warning for Front Passenger Seat, H16 Heated Driver’s Seat, MT6 Emission Class Euro 6d N1, EL8 2-Way Front Speakers, L16 Halogen Fog Lamps, W70 Tinted Rear Windows, Black Privacy Glass, ED4 Fleece Battery 12V 92Ah, VV9 Roof Frame Mounting Points, W78 Rear Door Window with Wiper and Washer, RF1 Tyre Brand Continental (10), F64 Electrically Foldable Exterior Mirrors, VF4 Caluma Black Fabric, F66 Lockable Glove Compartment, H20 All-Around Thermal Insulation Glass, F68 Electrically Adjustable and Heated Exterior Mirrors, JW8 ATTENTION ASSIST, Y44 Warning Triangle, LC2 LED Strip Lighting in Cargo Area, LC4 Comfort Roof Control Unit, F72 Automatically Dimming Exterior and Interior Mirrors, RG7 225/55 R17 Tyres, JX2 40,000 km Service Interval, FP2 Vito Mirror Package, SA6 Front Passenger Airbag, IN2 Wheelbase 3200 mm, Long Overhang, JH3 Communication Module (LTE). You can reach us by phone Monday – Friday until 8:00 p.m. and Saturday until 4:00 p.m.!! Further information:!! Leasing/financing and trade-in possible!! Errors and prior sale excepted!! Iodpox Hpgtefx Ah Ajik All information without guarantee ... more on our homepage

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, skupna višina: 750 mm, skupna širina: 670 mm, skupna dolžina: 360 mm, 3 pcs. WALTHER Distribution Cabinet with approx. 15m connection cable 5 x 16 mm² Details: According to IEC61439-4 Enclosure (H06) made of electrolytically galvanized sheet steel with heavy-metal-free plastic coating Colour: RAL 2004 - pure orange With single door, spring-loaded lock for padlock and recessed grip With crane eyes and side carrying handles Including fire-galvanized base frame with lugs for ground spikes Degree of protection: IP 44 Dimensions approx.: 739 x 669 x 360 mm (H x W x D) Base frame height approx. 230 mm Connection: 1 circuit breaker 3P 63A with thermal-magnetic trip unit with frame terminals 10-50 mm² Iedpsxrr Smefx Ah Ajik Output / Protection: 1 RCD circuit breaker 4P 63A/30mA -B- 1 CEE panel socket 32A 5P 400V 6h with miniature circuit breaker (MCB) 3P 32A -C- 2 CEE panel sockets 16A 5P 400V 6h each with 1 miniature circuit breaker (MCB) 3P 16A -C- 1 RCD circuit breaker 4P 40A/30mA -A- 6 protective contact sockets 16A 2P 230V each with 1 miniature circuit breaker (MCB) 1P 16A -C- Sale is ex works, payment in advance Price is per single distribution cabinet

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Röders RXP600DSH - Vreteno HSK63F maks. 30.000 obr./min - Menjalnik orodij za 24 orodij - Emulzijsko hlajenje z IKZ 40 bar - Odsesovalna naprava - Lasersko merjenje za orodja - 3D tipalo - Termalni paket Iodsx I A Imjpfx Ah Ajik - Priprava za avtomatizacijo Stroj je že v našem obratu v Soltauu. Kmalu bomo naložili slike.

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Iiedpfx Ahjd Ab Uus Ajk Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: rabljeno, prevoženi kilometri: 10 km, moč: 130 kW (176,75 KM), prva registracija: 12/2025, vrsta goriva: dizel, naslednji pregled (TÜV): 12/2027, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 6.836 mm, skupna širina: 2.040 mm, skupna višina: 2.590 mm, dolžina tovornega prostora: 4.051 mm, širina tovornega prostora: 1.832 mm, višina nakladalnega prostora: 1.961 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, * MAN TGE Panel Van TGE 3.180 4X2F SB * 8-speed automatic transmission, front-wheel drive * Engine output: 130 kW (177 HP) * Maximum speed: 165 km/h * "ergoActive" suspension seat on the left * Double passenger bench seat on the right, with storage compartment and foldable middle backrest * Driver and passenger seat heating, individually adjustable * Indium Grey Metallic * LED main headlights with LED daytime running lights * Fog lamps including cornering light * Headlamp cleaning system, washer fluid level indicator, heated front washer jets * Step illumination * Exterior mirrors, electrically adjustable, heated, and power-folding * High roof, painted in vehicle color (H3) * Rear step, half-width * Rear wing doors with extended opening angle * Intermittent wiper control with light and rain sensor * Laminated windshield with heat-insulating glazing, heated * Airbag for both driver and passenger with passenger airbag deactivation * Auxiliary water heater with remote control * MAN Connect * Comfort telephony with inductive charging function and external antenna connection (LTE) * USB Type-C data and charging ports with increased charging capacity * MAN Media Van Navigation Business Package * Fixed towbar * Long wheelbase 4,490 mm (L4) * Electrical terminal strip and KFG preparation * "Climatronic" automatic climate control in cab * Reinforced front axle * Permissible gross vehicle weight: 3,500 kg * Driver Assistance Package - City * Light & Vision Package * Comfort Package Plus * Hill-start assist * Emergency brake assist * ESP with electronic differential lock, traction control (ASR), and ABS * Front and rear parking assist * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assist "Light Assist" * Driver attention and drowsiness alert * Lane change assist * Crosswind assist * Blind spot warning on both sides and exit warning * Turn assist * Emergency assist (incl. active lane keeping assist and traffic jam assist) * Intelligent speed assist * With multifunction camera * Cruise Assist Plus * Digital instrument cluster * Tire pressure monitoring system * Emission standard: EU6e (EC) * Front-wheel drive * 8-speed automatic transmission Additional equipment prices: Iodpfx Ahexpzy Ie Ajik Retrofit towbar: €990.00 Increased towing capacity: €714.00 Front bar: €790.00 Cargo area lining from: €1,390.00 MIXTO conversion: €6,990.00 Seat bench system with individual seats: €7,900.00 Further prices on request. Vehicle from first owner, SERVICE RECORD, SINGLE OWNER. We would be happy to take your used vehicle in part exchange. Special financing from 4.99% possible. DELIVERY AVAILABLE AT EXTRA COST! The information provided online is non-binding and for description purposes only. It does not constitute agreed specifications. The seller is not liable for errors, input mistakes, data transmission errors / subject to change.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm Iijdpfxovz Hqys Ah Ajk - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: rabljeno, prevoženi kilometri: 78.500 km, moč: 350 kW (475,87 KM), vrsta goriva: bencin, vrsta prenosa: samodejen, prva registracija: 10/2020, emisijski razred: Euro 6, barva: siv, število sedežev: 5, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, sistem za imobilizacijo, Special equipment: - AMG Racing Aerodynamics Kit - Ambient Lighting - AMG Driver's Package Iodpfx Asxtrvhjh Ajik - Business Package - Energizing Comfort Package - High-End Driver Assistance Package - Adaptive Plus High Beam Assist - Head-up Display (front-view display) - High-End Infotainment Package - Interior trim: Black ash wood / aluminium - Advanced Comfort Package - Designo magno paint finish - High-End Lighting Package - Night Package (AMG) - Panoramic sliding sunroof - Upholstery/trim: Nappa leather, two-tone - Front seats: Climate control - Rear door sun blinds - AMG Performance sports exhaust system - Burmester surround sound system - Pre-installation for navigation system (Garmin MAP Pilot) - Pre-installation for mobile phone / comfort telephony / LTE capable - Reversible mat and loading sill protector Additional equipment: - Stowage Package - Adaptive brake lights - Front-passenger airbag deactivation - Driver and front passenger airbags - Active bonnet - All-wheel drive - Dashboard in ARTICO synthetic leather - Electrically adjustable and heated exterior mirrors (both) - Black-painted exterior mirrors - Pelvis airbags (front) - Integrated indicator in exterior mirrors - Brake assist - Painted brake calipers - Sunglasses compartment integrated in headliner - Chrome Package - DAB Tuner (digital radio reception) - Standard design and trim line - Digital instrument display - Stainless steel sports pedals - Automatic driving light activation - Door sills (stainless steel) - Electronic differential lock - Agility Select / Dynamic Select (driving mode switch) - Attention Assist (fatigue detection system) - Collision Prevention Assist (forward collision warning with braking function) - Hill-start assist - Live Traffic Information System - Vehicle setup (online services/apps) - Vehicle monitoring (tracking system) - Electric windows front and rear - Remote trunk lid release - Electric parking brake - AMG floor mats - Luggage compartment cover/rollo - Front cup holders - LED tail lights - Mercedes me connect infotainment system - Remote Online infotainment system - Black headliner - Interior lighting package - ISOFIX child seat attachments on rear seats - 5-door body - Keyless Go start system - Thermatic 2-zone automatic climate control - Driver's knee airbag - Window airbag system - Enlarged fuel tank - Diamond grille - Light alloy wheels - Mercedes-Benz emergency call system - Model update with code - Engine: 4.0 Ltr. – 350 kW V8 catalyzed - Advanced Park Package - Wheelbase 2873 mm - Tyre pressure monitoring system - Trip computer - Split/folding rear seat backrest - Low-emission as per Euro 6d - Front side airbags - Front door acoustic glass - AMG limited-slip differential - AMG Ride Control+ sports suspension - Front sports seats - MBUX extended voice control system - Start/stop system - 12V socket - Body-colour bumpers - AMG / Exterior Styling Package - Touchpad (centre console) - Rear trim/spoiler (AMG) - Warning and status display for rear seat belts - Heat-insulating tinted glass

Stanje: skoraj kot novo (rabljeno), prevoženi kilometri: 210.000 km, Leto izdelave: 2019, FIAT TALENTO YEAR 2019, 1.6 MJT ENGINE, INSULATED VAN WITH ZANOTTI STRADA REFRIGERATION UNIT, 220V NETWORK, ATP FNA 0° VALID UNTIL 04/2028, RENEWABLE, 210,000 KM, SERVICED AND READY FOR USE. Isdpfx Asukvf Ueh Ajik FINANCING OPTIONS AVAILABLE.

Stanje: rabljeno, Leto izdelave: 2008, Zebra 110pax4 label printer with pneumatic applicator. RA2315 Printer Manufacturer: Zebra Printer Model: 110pax4 Control Panel: LCD display with status indicator and keys on the printer, manual control panel on the side, and control via PLC I/O Printing Method: Selectable between thermal transfer printing or direct thermal printing Interfaces: Ethernet/control cable Print Media: Standard media, tags, and RFID media (reading and encoding of RFID labels) Iiodsux Sfzepfx Ah Ajk Current label size: 90x36mm, applicator is designed for this size Minimum label length: 12.7mm Media width: 16-114mm Ribbon width: 25.4-107mm Maximum ribbon length: 900m Core diameter: 25.4mm Maximum roll diameter: 101.6mm Resolution: 203 dpi (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Footprint: 700x700mm, with 100mm protruding for control panel/compressed air maintenance unit Applicator height: 800mm to the bottom edge Print/apply speed: approx. 2 seconds per label Electrical schematic included All prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Barvni zaslon za enostavno nastavitev Prednastavitev števila izdelkov za pakiranje Vgrajen skupni števec izdelkov (z možnostjo ponastavitve) Menjava role v manj kot eni minuti Tesnjenje s nožnim pedalom, avtomatsko ali ročno Transportni sistemi za avtomatsko polnjenje vrečk na zahtevo na voljo Tehnični podatki Največja dolžina vrečke: 450 mm Največja širina vrečke: 250 mm Največja debelina vrečke: 0,04–0,1 mm na plast Hitrost pakiranja: do 25 kosov/minuto Napajalna napetost: 1 faza, 220 V, 50 Hz Skupna moč: cca 1 kW Teža stroja: cca 70 kg Iiodpfoxlzr Ajx Ah Aok Dimenzije stroja: cca 670 × 665 × 860 mm Tiskalno območje: 53 × 75 mm Tip vrečke: verižne vrečke na roli Osnovni stroj 12.500 € + Termotransfer tiskalnik +5.500 € + Podajalnik etiket +2.900 € + SATO tiskalnik etiket vklj. s podajalnikom +6.500 € do 9.000 €

Stanje: rabljeno, največja dovoljena obremenitev: 30.020 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Leto izdelave: 2021, Oprema: ABS, 3-Axle Carnehl Tipper Trailer 25m³ VIN: PC09034 Chassis / Attachments: * Air suspension * SAF center drop support * Tipping lowering function * Tyres: 385/65 R.22.5 * Remaining tyre tread: 1st ~40/30%, 2nd ~30%, 3rd ~30/50% * 3 x BPW axles with disc brakes * Foldable underrun protection * 1 x PVC toolbox * XLite aluminium rims Body: Iodpfxexrwzto Ah Asik * Carnehl insulated tipper body * Volume: approx. 25 m³ * Load pressure gauge * Sliding tarpaulin * Front standing platform * Hyva front ram cylinder * Rear pendulum tailgate * Rear tailgate with 2 mechanical hook locks Weights: * Gross weight: 35,500 kg * Payload: 30,020 kg * Unladen weight: 5,480 kg Miscellaneous: * German registration * MOT (general inspection) and safety inspection valid until 01/2026 New general inspections/safety checks or changes to load capacity (downgrades/upgrades) available upon request. We are happy to assist you in obtaining export/transfer licence plates, and can also arrange transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, subject to changes, interim sales and mistakes! Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our special strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist with loading your purchased vehicles. Arrangement of special transports We gladly support you in organizing special transports. Temporary/export number plates We are happy to help you obtain export/temporary number plates. Handling customs formalities We are happy to assist you with customs procedures.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h Iisdpfevz Hqtox Ah Aok - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: rabljeno, prevoženi kilometri: 331.500 km, moč: 125 kW (169,95 KM), prva registracija: 10/2019, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 11/2027, barva: bela, vrsta prenosa: mehanski, prostornina tovornega prostora: 11 m³, dolžina tovornega prostora: 3.235 mm, širina tovornega prostora: 1.857 mm, višina nakladalnega prostora: 1.817 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, je imel nesrečo, klimatska naprava, Special equipment: Audio system: Radio/CD player with multifunction display, configuration with specific central locking system, Visibility Package 1, twin tires on 2nd axle / rear axle Further equipment: Overhead storage in cab roof lining, driver-side airbag, traction control system (ASR), exterior mirrors with short mounting arm, indicator integrated into exterior mirror, on-board computer, headliner trim in passenger compartment, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: Hill Start Assist, driver assistance system: Crosswind Assist, 165 A alternator, heating with recirculation function, body/construction: standard flatbed, steering column (steering wheel) adjustable for height/reach, headlight range adjustment, engine 2.0 l - 125 kW TDCi CAT, production plant: Otosan, wheelbase 3954 mm, low-emission according to Euro 6 emission standard, seat package 4: driver’s seat (4-way adjustable) - dual passenger seat, fabric, steel rims 6.5x16, front wall height extension aluminum flatbed, partially painted bumpers, tinted windows, thermal insulation glazing cargo-/passenger compartment, medium tint level. The vehicle’s chassis is damaged. Ijdpsxrihlofx Ah Aeik Please call us at WhatsApp/Viber also) E-mail:

Stanje: skoraj kot novo (rabljeno), prevoženi kilometri: 200.000 km, Leto izdelave: 2019, FIAT DOBLÒ 2019 EURO 6, motore 1.3 MJT, versione isotermica con gruppo frigorifero Zanotti Strada, alimentazione da rete 220V, ATP FNA 0°C - validità fino a 02/2028, 200.000 km, unico proprietario. Garanzia 1 anno. Possibilità di finanziamento. Ijdpov D I Swsfx Ah Aeik

Stanje: rabljeno, Legi-Air 4040Z z Zebra110pax4 tiskalnikom za etiketiranje in pnevmatskim žigom. RA1933 Proizvajalec tiskalnika: Zebra Tip tiskalnika: 110pax4 Nadzorna plošča: LCD zaslon z indikatorji statusa in tipkami Iiedpfx Ahsk Abllj Ajk Način tiskanja: Možnost termotransfernega ali termodirektnega tiskanja Vmesniki: RS 232 serijski, IEEE 1284 Mediji za tiskanje: Standardni mediji, obešanke in RFID mediji (branje in kodiranje RFID etiket) Minimalna dolžina etikete: 12,7 mm Širina tiskalnega medija: 16–114 mm Širina barvnega traku: 25,4–107 mm Največja dolžina barvnega traku: 900 m Premer jedra role: 25,4 mm Maksimalni zunanji premer role: 101,6 mm Ločljivost: 203 točk/palec (8 točk/mm) Velikost točke: 0,125 mm x 0,125 mm Hitrost tiskanja: 12 palcev/sekundo

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V Iijdpfxovz Hqmo Ah Aek - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. Iisdpfx Ajvz Hqgoh Aek All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm Ijdpsvz Hhxofx Ah Asik - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.