Herkules Km 1000 H nakup rabljenega (4)

Stanje: rabljeno, Swing diameter over bed: 2400 mm Nedpfxoxddvnj Agxswf Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 117119, Kat. št. 25158 Tehnični podatki: - Pretok zraka cca. 220 m³/h Nsdoxay D Hspfx Agxjwf - Razred prahu M - Priključni nastavek 50 mm - Predal - Pnevmatski priključek - Pogonska moč 400 V / 1,3 kW - Potrebna prostorska zahteva (Š x V x G): 1000 x 1350 x 500 mm - Teža cca 120 kg

Stanje: rabljeno, Kompleti valjev za profilno upogibalko, 3-valjna obročna upogibalka HERKULES WETZLAR Valji so primerni za profilno upogibalko HERKULES WETZLAR tip BO 238 N Premer osi: 60 mm z 18 mm utornico 2 kosa valjev komplet št. 1, premer valja = 110 mm, širina valja = 180 mm Nodpfx Agjglaq Ioxswf 2 kosa valjev komplet št. 2, premer valja = 160 mm, širina valja = 40 mm 3 kosi valjev komplet št. 3, premer valja = 150 mm, za premer cevi Ø 33 mm, širina valja 87 / 115 mm - Komplet št. 3 z adapter obročem iz Ø 93 na Ø 60 mm brez utornice Stroj je imel 2 gnana valja Teža vseh valjev 57 kg dobro stanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 5.000 mm, premer struženja: 1.550 mm, Premer struženja: 1.550 mm Razdalja med konicami: 7.000 mm Čelna plošča: 0,63 do 63 obr./min Njdpfjx Sdqqsx Agxowf Največja masa obdelovanca: 50 t Teža stroja: pribl. 80 t