Kompleti valjev za stroj za upogibanje profilov, 3-valjni stroj za upogibanje obročev, standardni ko

HERKULES passend für BO 238 K

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots. Tsdpsfz U S Ejfx Anpsd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Dimensions (LxWxH): approx. 450 x 300 x 1700 mm Maximum drilling depth: 60 mm Maximum workpiece height: 350 mm Table dimensions: 250 x 250 mm Speed range: 430 – 9,000 rpm (12 speed levels) 2 motor stages Speed adjustment via V-belt Todpfx Anoh Dimyoped Includes drill chuck Includes 16 A plug Includes stand/base frame

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Todshmvawjpfx Anped Weight: 740 kg

Stanje: novo, Bernardo Manual Metal Circular Saw CS 315 H Technical Specifications Saw blade diameter: 315 x 40 mm Speed: 19 / 38 rpm Max. vice opening: 150 mm Working height: 920 mm Motor output S1 100%: 0.75 / 1.5 kW Motor input power S6 40%: 1.0 / 2.1 kW Voltage: 400 V Machine dimensions (W x D x H): 530 x 1000 x 1740 mm Weight: approx. 235 kg Solid round material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Todsd Id Ugjpfx Anpsd Square tube 90°: 80 x 80 mm 45°: 70 x 70 mm Solid square material 90°: 80 x 80 mm 45°: 70 x 70 mm Rectangular tube 90°: 90 x 80 mm 45°: 80 x 70 mm Solid rectangular mat. 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head swivels 90° left and right for slotting operations Removable coolant tank integrated into robust machine base Gearbox with hardened and ground worm shaft and bronze worm wheel Safety guard opens automatically during cutting Precision, 4-way guided, self-centering double vise Ergonomically shaped handle with push-button for fatigue-free sawing Low blade speed (19 / 38 rpm) ideal for cutting solid materials Noise-reduced reduction gearbox running in oil bath Scope of Delivery Coolant system with filter Self-centering vise Machine base

Stanje: dober (rabljeno), Kavelver typ tryksandblæsemaskine 1800x2500 med motoriseret krog og kran SIRSI Type: Kavelver type Maks. emnediameter: 1800 mm Maks. emnehøjde: 2500 mm Maks. vægt af emne: 3.000 kg Maskinens løftekapacitet: 1x 3.000 kg Antal turbiner: 3 Turbinetype: 360 Turbinens hjuldiameter: 360 mm Turbineeffekt: 3x 7,5 kW Maks. turbineflow: Transportrails type: I Rensertype: luftvasker Fundament: JA Todowrxczspfx Anped Kabinebeskyttelse: Mn + gummi Filter: JA Maskinens samlede bredde: Maskinens samlede højde: Maskinens samlede længde:

Stanje: rabljeno, Tlak 50 t Dolžina upogibanja 1500 mm Razmak med stebri 1220 mm Krmiljenje Cybelec DNC 1200 Hitrost zapiranja 95 mm/min Delovna hitrost 1-10 mm/s Delovni hod 156 mm Čas ustavitve 59 ms Pot ustavitve 6 mm Tedpfxjra Rrho Anped Grlo 200 mm Razdalja med mizo in spodnjim batom 301 mm Širina mize 160 mm Višina mize 850 mm os X 550 mm Delovno območje osi R +/- 50 Število osi 3 (Y, X, R) Teža ca. 3600 kg Vključno z delovno lučjo Vključno z veliko zgornjih in spodnjih orodij Nova revizija leta 2003 pri proizvajalcu (dokumentacija na voljo) Novo krmiljenje 2003 Cybelec DNC 1200

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: RPM500_OSZ2, Robot - Polishing Machine RPM500_OSZ2 with oscillation (50 mm) and infeed (100 mm) Polishing discs diameter - 1000 mm Drive power - 4 kW Todpsd Dt D Iofx Anpod Extraction ports - 100 mm Two units available

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Tsdpfxjuz If Ns Anpod Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Leto izdelave: 2023, stanje: novo, Prostornina kotla: 270 l Volumenski pretok: 680 l/min Moč motorja: 5,5 kW Tedpfxehmi Nqe Anpod

Stanje: novo, Bandsaw Bernardo HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Tjdpfx Aed N S Urjnpsd Cutting height: 280 mm Saw band dimension: 3607 x 25 x 0.6 mm – 3 TPI Saw band widths: 9.5 - 25.4 mm Cutting speed: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Saw table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output power S1 100%: 2.2 kW (3.0 HP) Motor input power S6 40%: 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight approx.: 162 kg Scope of delivery • Saw blade • Parallel fence with magnifier • Mitre fence • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor including brake • Push stick • Operating tools