Deckel Fp 2 Nc nakup rabljenega (705)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: Cjdpeuc Ubwofx Afxspu >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1979, Deckel FP2 s brezstopenjsko regulacijo, orodna rezkalna stroja. Stroj je v dobrem stanju, tog namizje, SK 40 vpenjalni vreteno, pribor: razne napenjalne tule in držala rezk. V dobrem, delujočem stanju. Po dogovoru je možen prikaz pod napetostjo. Cpjdpfoxzn Hlsx Afxeu

Stanje: pripravljen za uporabo (rabljen), CNC rezkalni stroj, Deckel FP4NC, rabljeni stroj Proizvajalec: Deckel Model: FP4NC Serijska številka: 31549 Pomik po oseh: X-os: 560 mm Y-os: 500 mm Z-os: 450 mm Specifikacije mize: Dolžina: 900 mm Širina: 530 mm Največja nosilnost: 450 kg Pomiki podajal: X-os: 3600 mm/min Y-os: 3600 mm/min Cjdpfxewrdu As Afxepu Z-os: 3600 mm/min Specifikacije vretena: Stožec vretena: ISO 40 / BT / MK Moč vretena: 7,5 kW Največje število obratov: 5000 1/min

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2300-0053, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, dolžina mize: 1.000 mm, širina mize: 520 mm, skupna višina: 1.900 mm, skupna dolžina: 1.500 mm, skupna širina: 1.800 mm, največja hitrost vrtenja: 200 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 1.000 kg, - Number of table slots: 6 Cedpfewdn A Uex Afxjpu EQUIPMENT: - Swiveling table - Three-axis digital readout (Heidenhain) - New bellows - New handwheels

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Cpodpoxyhmvjfx Afxsu

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Cpjdpfx Afsxyk Upexeu

Stanje: dober (rabljeno), Leto izdelave: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Long travel milling head. Accessories include various collets and cutter arbors, counterholder. In good, fully functional condition. Can be demonstrated under power by arrangement. Cjdpfeumclaox Afxepu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW Cedpfxjxghtve Afxopu >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm Cpjdpfjv Td Elsx Afxju z-travel 400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2309-0121 / 2779 Generalüberholt, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 25 obr/min, vrtljajska hitrost (min.): 2.500 obr/min, skupna masa: 3.000 kg, Deckel FP3-LV tip 2309 z aktivnim digitalnim prikazovalnikom Ta oldtimer iz leta 1978 je bil leta 2008 temeljito obnovljen pri FPS in postavljen v stanje novega stroja. Deckel FP 3LV - V pomeni podaljšan pomik v osi X - s 3-osnim digitalnim prikazovalnikom Heidenhain - s brezstopenjsko nastavljivim pomikom 5–500 mm/min - tog kotni delovni stroj z vpenjalno površino 550 x 1400 mm - hitri pomik 1500 mm/min + počasni pomik 4 mm/min3 Cpjdpfx Aoxnyfyefxsu - notranji stožčasti vpenjalni priključek SK40 z Deckel navojem za žage S20x2

Stanje: rabljeno, Leto izdelave: 1984, X-travel: 500 mm y-travel: 400 mm Cpsdscxxypspfx Afxju z-travel: 400 mm Table size: 700 x 470 mm Spindle speeds: 40 - 4000 rpm Feed range: 2 - 3600 mm/min Rapid traverse speed: 4.0 m/min Quill stroke: 90 mm Spindle taper: SK 40 Control: Deckel Dialog 3 Drive power - milling spindle: 3 kW Total power requirement: 22 kW Machine weight approx.: 1.8 t CNC-controlled universal milling machine with Deckel Dialog 3 control, vertical head swivelling with quill, horizontal spindle, automatic feeds, rapid traverses, electronic handwheel, additional portable control panel, hydraulic tool clamping, automatic central lubrication, machine lamp, coolant system, separate coolant tank, various tool holders, emergency stop. - Machine sold - - SOLD -

Stanje: dober (rabljeno), Leto izdelave: 1986, Milling Machine Deckel FP3NC Manufacturer: Deckel Model: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: Used Travel (X/Y/Z): 400 / 400 / 400 mm Quill stroke: 80 mm Spindle speed: 40 rpm to 3600 rpm Swiveling milling head Hydraulic tool clamping Vertical/Horizontal SK40 Electronic handwheel Control panel for tool change and program start Documentation Lamp Cpjdsw Ein Uepfx Afxju Coolant system Full enclosure NC T400 rotary table Weight: approx. 2000 kg Electrical cabinet weight: 300 kg

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Cpedpfxexcbl Dj Afxju Teža: 3,8 kg zelo dobro stanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a state training workshop. Features: fixed table, SK 40 spindle taper. Included accessories: various collets and arbor mandrels, counterstay. The machine is in very good, ready-to-use condition, and can be demonstrated under power by prior arrangement. Codpfxjv U Rh No Afxspu

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Control: Deckel Dialog 11, equipped with a vise, inspection is possible. Cpsdpfx Afoqi D S Uexou

Stanje: pripravljen za uporabo (rabljen), Control: Deckel DIALOG 11E, tooling is available, operating hours unknown, regularly maintained, on-site inspection possible. Cpedpfjpu A Ekox Afxeu

Leto izdelave: 1987, Stanje: dober (rabljeno), X-axis travel: 710 mm Y-axis travel: 600 mm Z-axis travel: 445 mm CNC control: DIALOG 4 Spindle speeds: 18 – 6300 rpm Table size: 550 x 1000 mm Table load capacity: 600 kg Feed rate – manual adjustment: 10 – 3150 mm/min Feed rate – programmable: 2 – 6000 mm/min Cpjdpfxof Nf Anj Afxsu Rapid traverse speed: 6000 mm/min Drive power: 7.5 / 9.5 kW Hydraulic tool clamping, push-button operated – SK 40 Quill stroke: 80 mm Coolant system Operating voltage: 380 V Total power requirement: 20 kVA Machine weight: approx. 4.8 t Space requirement: approx. 2.15 x 3.80 x 2.40 m Electrical cabinet: 1.60 x 0.70 x 1.25 m

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Cpedpeqpl Uusfx Afxsu Collet chuck The machine was overhauled for approx. €24,000.00

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, -KOM 3149- Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head is rotatable 360 degrees on the flange plate. All guiding surfaces are in very good condition. The dimensions of the slotting head can be found in the last image. Cjdjwxxd Sjpfx Afxjpu

Stanje: rabljeno, Milling Machine Make: DECKEL Model: FP2 Technical Data Cpjdpfxjv Uzzte Afxju Manufacturer: DECKEL Model: FP 2 Table size: 700 x 330 mm X-axis travel: 490 mm Y-axis travel: 390 mm Z-axis travel: 200 mm Spindle taper: ISA 40 18 spindle speeds: 40–2000 rpm 18 feeds: 8–400 mm/min Motor power: 2.2 kW External dimensions: approx. W1100 x D1400 x H1600 mm Weight: approx. 1100 kg Equipment • 3-axis digital readout ACU-RITE • Various collets • Accessory package as shown in photos All information is supplied without guarantee. A demonstration can be arranged at any time in our showroom.

Stanje: rabljeno, Letnik izdelave: 80. leta Tehnični podatki: Pomiki X/Y/Z: 400 / 400 / 400 mm Vpenjalo orodja: SK 40 Območje obratov: 40 - 4000 1/min Pomik, brezstopenjsko nastavljiv: 2 - 360 mm/min Hitri pomik: 4000 mm/min Cpodpjyfrf Iofx Afxju Kotna miza: 700 x 460 mm, maks. obremenitev 350 kg Menjalec orodij: Število orodij: 20 Maks. premer orodja: 80 mm Maks. dolžina orodja: 300 mm Maks. teža orodja: 6 kg Oprema: - Krmilje: CNC tirno krmilje Deckel Dialog 11 - Hidromehanski vpenjalni sistem SK 40 z vlečnim vijakom DIN 69872 - Navpična in vodoravna delovna vretena - Glava rezkalnega stroja ročno nagibna +/- 90° - Geometrijsko stopenjski neposredni prenos za največji navor - Rezkalna zmogljivost na delovnem vretenu

Stanje: delavnici obnovljeno (rabljeno), Please read the technical specifications thoroughly. If the machine is under consideration as an investment for you, we kindly ask that you provide your full identification, including a correct telephone number and email address, in order to receive a quotation. Deckel FP1 AKTIV (3-axis Active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Cpjdpfx Afoxpwfgjxju Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - 3-axis active digital display HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralised lubrication Footprint (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos demonstrating the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measured over 150 mm) Parallelism deviation X axis: 0.002 mm (measured over 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Price: net, ex works, loaded from stock

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Codpfxjxyc Tks Afxspu Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: zelo dobro (rabljeno), Please read the technical specifications carefully. If you are considering this machine as an investment, we kindly ask that you provide your full proof of identity, including a correct telephone number and email address, when requesting a formal offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel range: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool drawbar: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse, X/Z axis: 1200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swung by 90 degrees and pushed to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Stepless feed in X/Z axis The machine was partially overhauled by a specialized company several years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Additional accessories available upon request! Cedpfoxyc N Eox Afxopu Condition: Good to very good, from a training workshop Available from March 2026

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Machine details: Stock no. 1022-2416 Machine type: Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 2000 Condition: Very good Control type: Conventional Cpjdpfx Afoyhdbmexou Location: Monheim am Rhein, Germany Country of origin: Germany Delivery time: Immediately Freight basis: ex stock, free on truck loading area Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 290 mm Table size: 600 x 210 mm Tool holder: SK 40 Spindle speeds: (16) 40 - 2000 rpm Infinitely variable feed: 5 - 500 mm/min Rapid traverse: 1.2 m/min Spindle drive: 1.5 / 1.9 kW Total power requirement: 9.5 kVA Machine weight approx.: 830 kg Space requirement approx.: 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with Heidenhain TNC 123 active digital display - Manual mode: manual operation and positioning via hand input - Automatic mode: program run single block, store programs * Fixed angle table * Movable vertical milling head, swiveling range +/- 90°, quill stroke 60 mm * Coolant system * Central lubrication * Steady rest with counter bearing * Anti-vibration mounts * Documentation