Deckel Fp 2 Nc nakup rabljenega (669)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Hjdjvf Iy Djpfx Ah Tsfn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Hedpfx Ahjvbifge Tsfn Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1983 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with warranty Hodpefzk Hfefx Ah Tsfn Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Brand: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine number: 6976 with warranty Hfodpfx Ahed Tytyo Tsn Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual -Used, as seen-

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted Hfsdjfcqfpepfx Ah Tsn RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 700 mm, pomik osi Y: 600 mm, pomik po osi Z: 455 mm, x-pomik 710 mm y-pomik 600 mm z-pomik 455 mm Krmilnik Dialog 4 Število obratov 6300 min⁻¹ Hedpfx Ahoz Rnp Rs Tofn Vpenjalno mesto SK40 Hod pinole 80 mm Velikost mize 550 x 1000 mm Obremenitev mize 0,6 t Skupna potrebna moč kW Teža stroja pribl. 4 t

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 31268, X-axis travel: 850 mm Hsdpecxxwgofx Ah Tjfn Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Table surface: 900 x 700 mm Spindle speeds: 30–6000 rpm Spindle taper: SK 50 Control: Sinumerik 3 M Feed rate: 0–6000 mm/min Spindle drive motor: 7.5 kW Total connected load: 32 kW Machine weight approx.: 6.6 t Space requirements approx.: 3.8 x 1.8 x 2.9 m Universal milling machine with Sinumerik 3 M control, swiveling table – adjustable in 3 axes +/-30°, tiltable +/-30°, rotatable +/-45°. Milling head swiveling in 2 axes. Separate electrical cabinet, coolant system, automatic central lubrication, work light, emergency stop safety function.

Stanje: rabljeno, številka stroja/vozila: 2819-0517, x-axis travel: 300 mm Hfjdpfjcxxp Tsx Ah Tsn y-axis travel: 300 mm z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D Path Control System Spindle taper: SK40 Quill stroke: 60 mm Swiveling head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Universal milling machines from Deckel have proven themselves for decades in mold, tool, and machine construction. CNC-controlled tool milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop button, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm Hsdpjqpl Uuefx Ah Tefn z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head no.: 1086 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual Hjdpfx Aschfyfeh Tsfn - used, as seen -

Stanje: rabljeno, Leto izdelave: 1988, Velikost mize: 1000–550 mm Nadzorni sistem: Grundig Gib x: 1000 mm Hfsdpsztfxpefx Ah Ten Vreteno SK40: da Nagibljivo vreteno: da (+/-) Nadzorni sistem: Grundig Serijska številka: 0209 4 metri nosilne dolžine

Stanje: rabljeno, X-hod 560 mm y-hod 500 mm Hfsdpfx Ajzq Hlleh Ten z-hod 410 mm Krmilnik Heidenhain TNC 355 Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru pod napetostjo tudi ogledati. Pribor, prikazana orodja in vpenjalne naprave so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje!

Stanje: kot nova (razstavni stroj), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2801 002016, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 6.300 obr/min, hitrost vretena (min.): 31 obr/min, poteza s peresom: 80 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, širina mize: 620 mm, dolžina mize: 390 mm, obremenitev mize: 250 kg, skupna masa: 1.700 kg, potrebna širina: 1.800 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 1.800 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, The machine is very sturdy and robust in terms of its design and construction. Its excellent accessibility makes it extremely user-friendly. The machine can also be moved using mechanical handwheels. CNC Path Control DECKEL Dialog 4 Easily programmable 3D path control with colored graphical support, dialog-based cycle input, contour path calculator, editor functions, clear program and tool management, parallel programming possible. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: vertical and horizontal. Manually extendable quill: 80 mm vertical and 65 mm horizontal, both manually extendable. Milling head: manually swiveling +/- 90° Speed range: 31.5-6300 rpm, geometric stepped direct gearbox for maximum torque / milling performance at the working spindle. Direct gearbox for maximum torque / milling performance at the working spindle Feed rate: 2 - 3600 mm/min, infinitely variable feed rate Rapid traverse: 4000 mm/min Hfjdpfxsywhvhe Ah Tjn Universal table: 620 x 390 mm, max. load capacity 450 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Hodpfsxyhmvox Ah Tofn

Stanje: rabljeno, Št. R 2300-0058, modernizacija podjetja Kretschmer leta 2016, hodi XYZ = 800 x 300 x 400 mm, vrtljaji 40 - 2.000 o/min, XYZ krmiljenje FAGOR Hfsdezh Dd Hopfx Ah Tjn

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Hfedpexbx R Ujfx Ah Tjn

Stanje: dober (rabljeno), Leto izdelave: 1964, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 200 obr/min, hitrost vretena (min.): 40 obr/min, vhodna frekvenca: 50 Hz, Proizvajalec: Deckel Tip: FP2 Vpenjalna glava: SK 40 Hodi po osi X/Y/Z: 500 / 200 / 400 mm Hedpfx Aoilg H Ejh Tjfn Območje vrtljajev: (18 stopenj) 40 - 2000 vrt/min Vertikalni hod vretena: 60 mm Horizontalni hod vretena: 100 mm Podi: 8 - 400 mm/min Velikost mize: 700 x 300 mm Moč motorja: 2,2 kW Priključek: 400 V / 16 A, vtič Teža: približno 1300 kg Potreben prostor (D x Š x V), približno: 1200 x 1250 x 1670 mm Glava je vrtljiva: 90° / 90° Oprema: - Digitalni prikazovalnik za 3 osi - Sistem za hlajenje Z veseljem vam bomo stroj predstavili v živo. Vse informacije so podane brez garancije. Pridržujemo si pravico do spremembe cen.

Stanje: rabljeno, Univerzalni obdelovalni rezkalni stroj z aktivnim digitalnim prikazovalnikom DECKEL tip FP 1 Univerzalni rezkalni stroj Serijska št. 2101 - 7088 Leto izdelave 1993 Pomiki osi X: 300 mm Y: 150 mm Z: 330 mm Velikost mize 600 x 200 mm Vpenjalno vreteno SK 40 - S20x2 Hitrost vretena 40-2000 obr/min, 16 stopenj Pomik osi X in Y 5 do 500 mm/min Hitri pomik 1200 mm/min Moč motorja 1,6 in 2 kW, preklopna polarnost Hjdpfxsziny Ie Ah Tjfn Priključna napetost 380 V, 50 Hz - Aktivno krmiljenje in digitalni prikaz za 3 osi HEIDENHAIN tip TNC 123 - Brezstopenjski pomik preko servo motorja v oseh X, Y in Z - Hitrost vretena prek 2 hitrosti motorja in 8 prestav - Premik pinole na vertikalni glavi 60 mm - Vertikalna rezkalna glava vrtljiva in 100 mm horizontalno izvlečna - Nagibna, vrtljiva in obračljiva kotna miza DECKEL, tip 2114 - Naprava za dovod hladilne tekočine v podnožju stroja - Centralno mazanje - Prostostoječa električna omara - Pokrov z zaščitnim stikalom, ki se odpre navzgor - Originalna kad za ostružke za namestitev na podnožje stroja - Električna shema priložena Potreben prostor D x Š x V 1600 x 1200 x 1770 mm Teža 900 kg Dobro ohranjen

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, Spoštovani, ponujamo v prodajo stroj Deckel FP2 Aktiv. Ta novejša izvedba se ponaša predvsem s krmiljenjem brezstopenjske hitrosti z nadzorno enoto Heidenhain Aktiv, kar omogoča izjemno enostavno in hkrati udobno upravljanje. Stroj je bil v naši delavnici temeljito pregledan in je v odličnem stanju. Lahko se sami prepričate o tem na licu mesta. Čas dostave: Na voljo takoj Številka stroja: 2202-xxxx Miza: fiksna kotna miza ali vrtljiva-nagibna miza Hodi: X400 mm/Y220 mm/Z400 mm Moč pogona: 3 kW Število hitrosti vretena: 16 Območje hitrosti: 25-2500 vrt/min Vpenjalni sistem orodja: SK40 Privod: S20x2 Pomik: brezstopenjski Oprema in dodatna oprema: 3-osna digitalna prikazovalna enota Heidenhain, brezstopenjska regulacija pomika na vseh 3 osi, digitalna prikazovalna enota Heidenhain z nadzorno enoto Aktiv, sistem za hlajenje, centralno mazanje, tehnična dokumentacija, nastavljive nogice, varnostne naprave (opcijsko) Naša obljuba o storitvah: - Smo certificirano podjetje z izkušnjimi strokovnjaki s področja strojarstva - Vsi stroji so temeljito pregledani - Vsa maziva in morebitni obrabljeni deli so predhodno zamenjani - Na željo lahko temeljito obnovimo izbrani stroj, v celoti ali delno - Na željo lahko naročite dodatno opremo, kot so orodja itd., neposredno Hfjdpfx Ajzldnaeh Tjn - Na željo lahko namestimo dodatno opremo, kot so varnostne naprave itd., neposredno - Z veseljem poskrbimo za prevoz in/ali dostavo

Stanje: rabljeno, x-pomik 560 mm y-pomik 500 mm Hfedpfxjzq Hk Uj Ah Ten z-pomik 410 mm Krmiljenje Deckel Dialog 11 Po naši oceni je stroj v dobrem, rabljenem stanju in si ga je mogoče po dogovoru ogledati pod napetostjo. Pribor, prikazano orodje in vpenjalna sredstva so v obsegu dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: dober (rabljeno), Leto izdelave: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Long travel milling head. Accessories include various collets and cutter arbors, counterholder. In good, fully functional condition. Can be demonstrated under power by arrangement. Hfedpfx Aheumclas Tsn

Stanje: rabljeno, x-pomik 500 mm y-pomik 200 mm z-pomik 400 mm Vpenjalna površina mize 700 x 300 mm Vpenjanje orodja SK 40 - S20 Pomik 8 - 400 mm/min Hitri pomik v X in Z 1200 mm/min Število vrtljajev 40 - 2000 obr/min Skupna potrebna moč 2,2 kW Teža stroja ca. 1400 kg Potrebna površina ca. 1500 x 1200 x 1600 mm Hedpox Hay Defx Ah Tsfn Vključno z 2-osnim digitalnim prikazom Heidenhain

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table Hfjdpfxoxghtve Ah Tsn >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, Leto izdelave: 1981, Teža stroja pribl. 1.700 kg Dimenzije 2000 x 1000 x 1950 mm Hedeyv Nitjpfx Ah Tsfn

Stanje: rabljeno, Leto izdelave: 1984, številka stroja/vozila: 2804-1181, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, širina mize: 450 mm, dolžina mize: 700 mm, največja hitrost vrtenja: 3.150 obr/min, vrtljajska hitrost (min.): 32 obr/min, rabljeni orodjarski rezkalni stroj DECKEL, model FP 3A CNC Velikost mize 700x450 mm, vpenjalo vretena SK40 DIN 2080, Hfjdpfjyrnvvsx Ah Tjn prehodi: X/Y/Z = 500/400/400 mm, vrtljaji od 31,5 do 3150 obr/min (v 21 delovnih hitrostih vretena), hitrost pomika 5-1250 mm/min, hitri pomik v X, Y in Z 2500 mm/min, hladilna naprava in strojni podstavki. Leto izdelave stroja: 1984, stroj je bil leta 2010 obnovljen pri podjetju Harich. Stroj je pri nas v 71334 Waiblingen-Beinstein in si ga lahko ogledate. Prosimo, kontaktirajte nas.