Fiori Db 250 S nakup rabljenega (88.244)

Leto izdelave: 2025, stanje: novo, Vacuum Lifter BARBARIC, Swivelling, incl. Column Slewing Crane Equipment package consisting of: - Vacuum lifter uniWood B3-90 Degree - 250 Comfort version with integrated chain hoist, reinforced, load capacity: 250 kg Suitable for the vertical and horizontal transport of flat, standard commercial panels. Vacuum generation is achieved pneumatically via ejector. A reinforced vacuum pump is installed for lifting permeable materials (MDF over 8 mm thick). -- Technical Data -- Lifting speed chain hoist: 0–10 m/min infinitely variable via frequency converter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Dead weight: approx. 85 kg Hfedpfx Aec Umftofwof -- Safety system -- The lifter is equipped with a vacuum gauge. Load release via 2-button operation - BARBARIC Column Slewing Crane Load capacity 250 kg at the hoist Consisting of: column, bracket, and low-friction jib. Supplied with trolley and energy supply system. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Jib outreach: 5 m Slewing range: approx. 250° Manual slewing and trolley travel Base plate 700 x 700 mm with mounting materials. Supplied with chemical anchors for concrete floor. A prerequisite for this mounting is a suitably reinforced concrete floor. The static inspection of the floor is to be carried out and documented by the customer. Other versions and lengths available on request.

Stanje: pripravljen za uporabo (rabljen), Siemens 6FX1190-3AA00 MS 250 Module E, version B, used, 100% functional Hedpjxagrkjfx Afweff

Stanje: novo, številka stroja/vozila: S-CL-250-FN-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 250 m³/h, skupna višina: 600 mm, skupna dolžina: 340 mm, skupna širina: 430 mm, skupna masa: 35 kg, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 workstations Type: 250 FN Version: Mobile Control: none Horizontal, mobile mechanical air purifier with EC radial fan for the filtration of solder fume. TECHNICAL DESCRIPTION: Hfodjvrylfspfx Afwjf Airflow: - 240 m³/h (nominal airflow) - 170 m³/h (effective air output) (depends on filter configuration, without extraction hoods) Suction ports: 2 x NW 50 mm (rear) Filter configuration: - Prefilter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Colour: RAL 7035 light grey (custom colour on request) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow output: not adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Hfodpfx Aowlkcasfwjf

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Delivery time: to be agreed Hfsdpfx Afewz R Iuowof Freight terms: ex works

Stanje: dober (rabljeno), Leto izdelave: 1994, Tlačna sila: 250 t Iztek: 360 mm Velikost mize: 1250 x 630 mm Premer mize: 250 mm Vpenjalna površina bata: 850 x 450 mm Vgradna višina: 800 mm Hod bata: do 500 mm Premer bata: 400/360 mm Hitrost bata navzdol: 200 mm/s Hfjdpfx Afoy Amxxjwof Hitrost bata navzgor: 110 mm/s Skupna potreba po moči: 20,5 kW Približna masa stroja: 8 t

Stanje: rabljeno, Leto izdelave: 2008, Screw diameter: 18 mm Clamping force: 250 kN Max. opening stroke: 350 mm Mould installation height: 200 mm Control system: Selogica Operating hours: 52,492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Moulding Machine – Year of manufacture: 2008 – Excellent condition For sale is a reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection moulding machine from 2008. The machine is ideal for precision plastic parts in small to medium batch sizes and stands out with its robust construction and renowned ARBURG quality “Made in Germany”. Technical highlights: - Clamping force: 250 kN - Injection unit: size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Tie bar spacing: approx. 270 x 270 mm Hfjdpfx Afeywzv Iewof - Mounting plates: approx. 380 x 380 mm - Connected load: 53 kW Electrical equipment: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current draw: 89 A Further information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term spare parts availability ensured Inspection possible by arrangement. Further information, photos, or videos available upon request. - Operating hours: 52,492 h, 7,085,048 cycles - Centering ring adapters ø125mm - Blow moulding unit included

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve Hodox D Rqropfx Afwsff • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Hodpfx Aevl Skgofwjff Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, barva: drugo, Leto izdelave: 2018, Lastna teža: 6.470 kg Hfjdpfoym Aw Dox Afwof Os 1: levo 10 mm, desno 10 mm Os 2: levo 10 mm, desno 10 mm Os 3: levo 10 mm, desno 10 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Arburg 270 S-250 - 60 Hfedpfx Ajx I Rdvjfwof Zapiralna sila: 25 ton Leto izdelave: 2002 Razmak med stebri: 27 x 27 cm Krmiljenje: S Vključuje transportne trakove

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 468 kg, največja dovoljena obremenitev: 1.532 kg, skupna masa: 2.000 kg, dolžina tovornega prostora: 2.530 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253 cm x 152 cm Side wall height: 30 cm Loading platform height: 80 cm Gross vehicle weight: 2000 kg Payload: 1532 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350 kg brakes each Low chassis Fully welded, hot-dip galvanized steel frame Aluminum side walls with tension locks Folding and removable on all sides Galvanized steel floor Jockey wheel 6 lashing rings Reinforced 13'' C-type tires with steel valves M+S tires Net/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light, and triangular reflectors Upper frame mounted on rubber bearings Manual pump with stowable handle Safety lock for upper frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 ONWARDS - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Complete LED lighting - Anti-theft lock - Fine- or coarse-mesh net - H-frame - Mesh side extensions in various heights, also with closed design - Additional side walls, steel or aluminum, 30 cm high with tension lock - Flat cover, with or without bows Hfsdpfx Ajw A I Etofwef - High cover, 140 cm Additional accessories available upon request! Plus shipping to Gera and vehicle registration certificate: €200 net Images are for reference and may show optional extras subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for collection. Workshop open weekdays from 8:00–17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also stock a wide range of spare parts and accessories for trailers from various manufacturers. Visit us online or come by in person!

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details. Hjdpfsv A Uw Dex Afwoff

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Hfjdpfx Ajlz Rvljfwef Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, lastna masa: 614 kg, največja dovoljena obremenitev: 1.386 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.530 mm, širina tovornega prostora: 1.550 mm, skupna dolžina: 1.630 mm, skupna širina: 990 mm, skupna višina: 3.930 mm, vzmetenje: jeklo, velikost pnevmatike: 165R13C 96/94N, This tipper features a frame construction with a closed profile, which increases its stability. It utilizes a 5-stage cylinder, allowing for a larger tipping angle (up to 55°). All side panels can be opened and removed. The model is also equipped with a steel floor. | KIPPER 250/2 C S 2T rear tipper | Galvanized frame | Lockable recess for 2 loading ramps incl. ramps (L: 243 cm, W: 30 cm) | Platform dimensions: L: 2.53 m, W: 1.52 m, side panel height: 0.40 m, loading height: 0.70 m | 4 recessed lashing rings (2 left, 2 right) in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Subject to errors, input mistakes, and prior sale. Hfodou R D Sdjpfx Afwjf

Stanje: dober (rabljeno), Manufacturer: MBT Model: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm Hjdpfx Afshzr U Iowjff

Stanje: dober (rabljeno), Leto izdelave: 1981, HEISSPRESSE PLATTENABMESSUNGEN: 2500 x 1300 mm ERWÄRMUNG DER PLATTEN DURCH HEISSWASSER 6 HYDRAULIKZYLINDER VON DER UNTERSEITE MAXIMALER PLATTENABSTAND: 450 mm GESAMTPRESSDRUCK: 120 Tonnen Hfjdpfx Afswup U Hswef GUTER ZUSTAND

Stanje: delavnici obnovljeno (rabljeno), Precision Lead- and Feed-Screw Lathe Manufacturer: GDW Model: LZ 250 S Hfsdpfopz Hubsx Afwof Year of Manufacture: 1998 – overhauled, newly painted RAL7035 light grey Machine No.: 069 Centre Height: 125 mm Centre Distance: 500 mm with warranty Geometrical acceptance with inspection report Accessories: - 3-axis digital readout ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool post base unit, size A - Bed stop - Coolant system - Chuck guard with electrical interlock - Chip guard/rear splash guard - Operating manual – used, as seen –

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: omejena funkcionalnost, skupna masa: 150 kg, Grundfos electronically controlled dry-runner pump TPE 100-250/2-S A-F-A-BAQE-ND1, single-stage inline pump, Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA motor We offer the Grundfos electronically controlled dry-runner pump. ⭐︎ Condition: good (used) The electronically controlled dry-runner pump is used but fully operational. The pump was working flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Nominal flow rate: 135 m³/h Nominal head: 20.1 m Mechanical seal: BAQE Pump casing: cast iron Impeller: cast iron Gross weight: 157 kg For further details, please refer to the nameplate. Scope of delivery as shown in the pictures. Inspection prior to purchase is possible and expressly encouraged. Hfsdpfxjyc T Apj Afwsf 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, buyer pays shipping costs. Single-stage volute pump with opposite-sided suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, head piece, and impeller) can be easily removed for maintenance or servicing while the pump casing remains in the piping. The pump is equipped with a non-balanced rubber bellows seal. The mechanical seal complies with EN 12756. Pipe connections via DIN flanges PN 16 in accordance with EN 1092-2 and ISO 7005-2. The pump is fitted with a fan-cooled permanent magnet synchronous motor. The motor efficiency meets energy efficiency class IE5 as per IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated in the motor terminal box. The electronic speed control allows continuous adjustment of the motor speed and thus the pump performance to actual requirements. The pump is equipped with a differential pressure sensor.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 270 S 250-60 (2004) Zapiralna sila: 25 t Razdalja med veznimi palicami: 270 mm × 270 mm Dimenzije plošč: 400 mm × 400 mm Hedpfxexl Tp To Afweff Maks. hod odpiranja orodja: 275 mm Min. višina orodja: 198 mm Maks. dnevna odprtina: 279 mm Hod izmetalca: 95 mm Sila odpiranja orodja (maks.): 14 kN Dimenzije stroja (Š × D): 1250 mm × 3800 mm Teža stroja: ca. 1900 kg Premer polža: 22 mm Prostornina hoda: 39 cm³ Tlak vbrizga: 1810 bar Količina vbrizga (2 črpalki): do 8,1 cm³/s Zmogljivost materiala (PS): do 22,0 kg/h Leto izdelave: 2004 Tip: hidravlični brizgalni stroj

Stanje: novo, * IMMEDIATE AVAILABILITY * Including hand pump / solid steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: No initial registration • TÜV/Inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: Platform trailer (wheels below the body) • Tires: 165/70R13 • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Anodized double-wall aluminum side panels • All side panels foldable and removable • Removable steel corner posts • Mounting option on all 4 corners for tilt frame, mesh extension, side panel extension, or front wall riser • Plastic button fasteners on side panels for securing tarpaulin or flat cover • Sturdy eccentric locks • 44° tipping angle • Manufacturer’s approval for 100 km/h • Highly durable solid steel floor! • Reinforced V-drawbar Hfsdpfx Afsx Tbk Dowsf • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • Numerous cross members for high point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing points inside side rail (600DaN/kg)! • Unbraked KNOTT rubber-axle suspension • 13-pin electrical plug • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Centrally positioned jockey wheel Optional accessories – please inquire: • Mesh extension • Side panel extension • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool/storage box • Reversing light • Lashing straps • And much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary export license plates (Germany) available - Export license plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialist dealers & service workshops for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions, and prior sale excepted -

Stanje: novo, Disc diameter: 250 mm Grinding wheel dimensions: 250 x 25 x 20 mm Speed: 2,850 rpm Voltage: 400 V Total power requirement: 2.0 kW Machine weight approx.: 23.0 kg Required space approx.: 600 x 290 x 300 mm Features: - Heavy-duty design and high-quality equipment - Ideal for professional use - Perfect for dulling and polishing - Achieves mirror-finish surfaces on various materials Hedpfx Aexak H Sjfwoff - When used with optionally available polishing wheels and compounds - Lockable ON-OFF switch according to IP54 with undervoltage release - Includes motor with copper windings for long service life - Standard with rubber feet for vibration-free operation - High running smoothness due to balanced rotor with quality ball bearings - Attractive machine body made from high-grade die-cast construction - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing wheel - Hard polishing wheel - Operating manual in German

Stanje: novo, Grinding width: 32.0 mm Maximum grinding wheel diameter: 250 mm Grinding wheel dimensions: 250 x 32 x 32 mm Hfjdjxaa Aijpfx Afwef Speed: 2850 rpm Grit: K 36 / K 80 Motor power: 1.5 kW Voltage: 400 V Weight: 30.0 kg Dimensions (LxWxH): 510 x 320 x 360 mm Features: - ON-OFF switch to IP54 standard with undervoltage release - Extended application range with optionally available grinding attachment - Versatile use for a wide variety of materials (metal, plastic, etc.) - Smooth operation thanks to balanced rotor with quality ball bearings - Includes copper-wound motor for long service life - Large protective screens provide optimal protection against sparks - Stable and adjustable workpiece support made of cast iron - High pulling power due to powerful drive motor Scope of delivery: - Coarse grinding wheel K 36 - Fine grinding wheel K 80 - Double-sided spark protection - Workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, New trade fair demonstration unit (immediately available): RENNER Riko 700/250 S-KT Piston Compressor with galvanized 250-liter receiver equipped with refrigerated dryer and level-controlled condensate drain Hfsdpferxu Erex Afwof with soundproof hood with CEE plug with metal buffer set for compressed air vessels Technical specifications: Motor power: 4.0 kW Rated voltage: 400 V Max. pressure: 10 bar Delivery rate at 7 bar: 570 l/min Cylinders / Stages: 2/2 Sound level: 68 dB(A) Compressed air receiver volume: 250 liters Dimensions (L x W x H): 1411 x 722 x 1377 mm Weight: 296 kg Shipping available at extra cost. Leasing offer from our partner bank for businesses, e.g.: Term 60 months from €115.15 per month (plus insurance, plus VAT & contract fee) Purchase at the end of the lease by paying a final installment is possible. Subject to credit approval. We always have a wide selection of new and used compressors in stock! Immediately available.

Leto izdelave: 2021, obratovalne ure: 2.235 h, stanje: rabljeno, Used machine, immediately available: RENNER RSF 250 D – frequency-controlled, direct-drive screw compressor (6 to 8 bar) with RENNERtronic control system with REflex control – adjustable pressure range from 6 to 8 bar Operating hours: 2235 h Year of manufacture: 2021 Pressure: 6 to 8 bar Hfjdpfxeh Rvpke Afwjf Rated power: 250 kW Free air delivery: at 6 bar: 12.13 to 49.30 m³/min at 8 bar: 11.80 to 44.50 m³/min Sound level: 84 dB(A) Compressed air outlet: DN 100 Dimensions (L x W x H): 3663 x 2100 x 2338 mm Weight: 5530 kg Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.