Rezkalni stroj - univerzalni

DECKEL FP 2

Stanje: pripravljen za uporabo (rabljen), Orodna rezkalna stroj DECKEL FP 2 / s Heidenhain 3-osnim digitalnim prikazovalnikom -Originalna barva / Dobro vzdrževano splošno stanje -Heidenhain 3-osni digitalni prikazovalnik -Pomiki X/Y/Z: 450x230x400 mm -Namizna vpenjalna površina: 700x350 mm -Območje vrtljajev: 40 - 2000 min⁻¹ Djdpfx Ajy Rgk Depljut -Pomiki / hitri pomiki na vseh treh oseh -Nosilec orodja ISO 40 -Navpična/Horizontalna rezkalna naprava z navpično pomično glavo -Hladilna naprava -Kad za ostružke -Delovna luč -Dokumentacija Dimenzije: D x Š x V 1,5x1,7x1,8 m / Teža 1600 kg Pridržujemo si pravico do napak ali sprememb.

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Dedpsrqwbiefx Aplout Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Active TNC 111 Heidenhain Digital Readout and Accessories – Excellent Condition Technical Data: >> Year of manufacture: 1979 >> Machine no.: 2202-10512 >> Fixed angle table >> Spindle speed: 25 - 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel (X/Y/Z): 400/220/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm Duodpfx Asy H Ibcjplot >> Vertical and horizontal quill - ISO 40 (SK40) extendable >> Drawbar system: M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active Digital Readout Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet including: Collets, tool holders, clamping tools, steady rest, indexing head with 3-jaw chuck, machine vice, steady rest, dividing plates, and much more About the machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw very little use. It includes an accessory cabinet with comprehensive tooling. The machine has very little backlash, and all the axes move smoothly. The geometry is outstanding. Even at maximum speeds, the milling machine operates smoothly. With this newer FP2 model, the feed can be steplessly controlled in all three axes, and each axis also has a rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control system, you can enter dimensions which the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Table clamping surface 700 x 285 mm Travel X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions (L x W x H) 1150 x 1050 x 1650 mm Machine weight 1000 kg Dusdjm Uygvepfx Apljt Accessories / Special features: • Vertical milling head, swiveling R/L • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružniška klop, stružnica z vodilno in pogonsko vreteno, stružnica z vodilno in pogonsko vreteno -Proizvajalec: Strunguri Arad, stružnica z vodilno in pogonsko vreteno tip SNA560x2000 -Dolžina struženja: 2140 mm -Premer struženja nad posteljo: 600 mm -Premer struženja nad suportom: 330 mm -Vrtina vretena: Ø 65 mm Dujdsyaypkjpfx Aplet -Število vrtljajev vretena: 16 - 1600 o/min -Tro-čeljustna glava: Ø 310 mm -Ležišče konjička: MK5 -Pogonski motor: 11 kW -Dodatki: vključeni, glej fotografije -Dimenzije: 3700/1050/H1400 mm -Teža: 3600 kg

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Na voljo so tri stare rezkalne stroje Hermle in Deckel. 1) Horizontalna rezkalna stroj Hermle FW 801, vpenjanje orodij: SK40, pomik X/Y/Z: 430mm/150mm/420mm, hitrost vrtenja: 2000obr/min, dimenzije stroja X/Y/Z: pribl. 2250mm/1700mm/1500mm, teža: pribl. 1000kg. 2) Universalna rezkalna stroj Hermle FW 710, vpenjanje orodij: SK30, dimenzije mize X/Y: 710mm/190mm, pomik X/Y/Z: 400mm/150mm/350mm, hitrost vrtenja: 2240obr/min, dimenzije stroja X/Y/Z: pribl. 1500mm/1000mm/1800mm, teža: pribl. 700kg. 3) Deckel FP 2, leto izdelave: 1987, vpenjanje orodij: SK40, pomik X/Y/Z: 300mm/220mm/400mm, dimenzije mize X/Y: 620mm/390mm, maksimalna obremenitev mize: 250kg, hitrost vrtenja: 3150obr/min, pomik: 3600mm/min, hitri pomik: 4000mm/min, dimenzije stroja X/Y/Z: pribl. 2500mm/2100mm/1800mm, teža: pribl. 1250kg, krmiljenje: Heidenhain TNC 355. Možen je ogled na lokaciji. Možna je posamična prodaja, vendar je prednost paketni prodaji. Dodpfx Ajy I Adhspljut

Stanje: pripravljen za uporabo (rabljen), Obdelovalni rezkalni stroj DECKEL FP 2 iz izobraževalne ustanove - Dobro ohranjen originalni stan - Pomiki X/Y/Z 400x200x400 mm - Digitalni prikazovalnik za 3 osi "NOVO" - Nagibna miza - vpenjalna površina mize 700x350 mm - Območje vrtljajev 40 - 2000 obr./min - Avtomatski pomiki / hitri pomiki v vseh treh oseh - Orodni vpenjalnik ISO 40 - Vertikalna / horizontalna rezkalna naprava - Vertikalna glava z možnostjo nagibanja in izvlečnim vretenom za vrtanje - Naprava za hlajenje - Matica vretena X-OS "NOVA" - Nožice stroja Dedpfxjx Hyuhs Apleut - Razni držala za orodje - Plošča za odvod ostružkov - nožica stroja - Dokumentacija Mere: D x Š x V 1,5 x 1,7 x 1,8 metra / teža: 1500 kg Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm Dusdpfx Apsvr S Ulslst W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: pripravljen za uporabo (rabljen), Fraiseuse universelle Deckel FP 2 NC TNC 320 / 321 Courses : x - 300 mm | y - 300 mm | z - 400 mm Vitesse en continu : 31,5 - 5000 tr/min Avances : 2-4000/min Avance rapide : 4000/min Porte-outil : SK 40 Course de la broche : 80 mm Poids de la machine : 1350 kg Vous pouvez volontiers venir voir la machine sur place. Duedpjxfkm Aefx Apljt Nous pouvons organiser pour vous une expédition économique ! Vous recevrez une facture conforme. Pour les clients étrangers, une facture nette peut être établie, à condition d’avoir un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Les noms des sociétés et les marques mentionnés sont la propriété de leurs détenteurs respectifs et servent uniquement à l’identification et à la description des produits. Des écarts dans les données techniques ou des erreurs dans la description de l’article peuvent survenir et restent réservés.

Stanje: pripravljen za uporabo (rabljen), Orodjarska rezkalna stroj / DECKEL FP 2 s 3-osnim Heidenhain digitalnim prikazovalnikom ND 780 Dusdpfjy Ipgijx Aplet - Pomiki X/Y/Z: 450x230x400 mm - Avtomatski pomiki / hitri pomiki na vseh 3 oseh - 3-osni digitalni prikazovalnik Heidenhain ND 780 - Območje vrtljajev: 40-2000 min⁻¹ - Univerzalna nagibno/vrtilna miza - Horizontalna/vertikalna rezkalna enota z navpično pomično glavo - Vpenjalo za orodje ISO 40 - Hladilni sistem - Kad za ostružke - Različni nosilci orodij in vpenjalne puše - Dokumentacija Mere: DxŠxV 1,5x1,7x1,8 metra / Teža 1600 kg Pridržujemo si pravico do napak in tipkarskih napak

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Djdpfstycg Sox Aplout Machine weight approx. 2,500 kg Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: Djdpfowid Spex Aplsut - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, -KOM 3149- Tukaj je na voljo utorni zabijalni glava za rezkalni stroj FP2 Deckel. Glava je na prirobnični plošči vrtljiva za 360 stopinj. Vse vodilne površine so v zelo dobrem stanju. Dimenzije utorne glave so navedene na zadnji sliki. Velikost: približno 600 mm x 450 mm x 500 mm Duedpswxxd Sjfx Apljt Teža: približno 35 kg

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system Dujdpfxetqqmho Aplot

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv milling machine. This newer version impresses particularly with its infinitely variable spindle speed control featuring a Heidenhain Aktiv controller, which makes operation both extremely straightforward and highly convenient. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site. Dusdpfxsx Hr Dzs Aplot Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can provide a complete or partial overhaul of the selected machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further equipment, such as safety devices, directly for you - We are happy to arrange shipping and/or installation services